Get a quote
PRODUCT VIEW GW-PA180I-F product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

GW-PA180I-F

Hot Swap

INQUIRY READY

GW-PA180I-F

Greatwall / Server Power Supply / Hot Swap

GW-PA180I-F gives Hot Swap Design, Network Control Equipment, Compact Server Systems, Industrial Computing Cabinets, and Embedded 12 V Platforms a power platform built around 180W capacity and a stable 12V rail. It is intended for an installation-ready choice for mission-critical equipment.

Model
GW-PA180I-F
Series
Hot Swap
Input Voltage
90-290Vac / 192-290Vdc
Output Voltage
12V
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The GW-PA180I-F is designed for compact systems that require stable 12V output, wide AC / DC input compatibility, and convenient hot swap maintenance. It is suitable for compact server hardware, embedded computing platforms, network control devices, industrial cabinets, and other infrastructure equipment where power stability and service accessibility are important.

Plan the GW-PA180I-F output wiring around the actual current demand: keep conductors short, use low-resistance terminations, separate power paths from sensitive signal wiring, and preserve access for retightening and inspection. Arrange the enclosure so heat from neighboring components cannot collect around the supply or its connection points.

Qualify the GW-PA180I-F at several load levels, measuring voltage at both the supply terminals and the equipment input rather than relying only on no-load readings. Record cable drop, connector temperature, and enclosure temperature as baseline values. Later maintenance checks can compare against this record to identify loose joints, rising contact resistance, or deteriorating heat dissipation before they interrupt service.

CORE ADVANTAGES

180W Hot Swap 12V Power Supply for Compact Servers, Embedded Systems, and Control Infrastructure Platforms

The GW-PA180I-F delivers 180W output for compact server systems, embedded computing platforms, network control equipment, industrial control devices, and other low-to-medium power infrastructure platforms that require stable 12V power delivery.

01

180W Compact Hot Swap Power Output

The GW-PA180I-F delivers 180W output for compact server systems, embedded computing platforms, network control equipment, industrial control devices, and other low-to-medium power infrastructure platforms that require stable 12V power delivery.

02

Wide AC / DC Input Compatibility

This model supports 90-290Vac / 192-290Vdc input, making it suitable for systems that may operate under different AC or DC power distribution environments. The wide input range helps improve deployment flexibility across compact infrastructure and control equipment.

03

Stable 12V Output Architecture

With a 12V output design, the GW-PA180I-F is suitable for platforms that require standard low-voltage DC power for boards, control modules, fans, storage interfaces, embedded processors, and system-level power distribution.

04

Hot Swap Structure for Easier Maintenance

As part of the Hot Swap series, this model supports easier replacement and maintenance in compatible equipment. It is suitable for applications where power module accessibility, service convenience, and reduced maintenance interruption are important.

05

Practical 180W Power Level for Compact Systems

The 180W rating makes this model suitable for compact platforms that do not require high-capacity power modules but still need stable output and dependable operation. It is a practical option for lower-power infrastructure systems, control devices, and embedded 12V platforms.

06

Safety Support for Commercial and Infrastructure Use

The GW-PA180I-F supports CCC, CB, and CE, helping meet common safety requirements for commercial equipment, infrastructure systems, and export-oriented power supply projects.

MODEL SELECTION

Compare Greatwall power options.

Review nearby Greatwall models and select the power level, output architecture, and form factor that best match the target system.

Model Power Input Voltage Output Voltage Safety Best-Fit Application
GW-PA70IB 70W 90-290Vac / 192-288Vdc 12V CCC, CB, CE Low-power control boards, compact embedded devices, and small 12V infrastructure modules
GW-PA150IB-F 150W 90-290Vac / 192-288Vdc 12V CCC, CB, CE Compact 12V platforms, small industrial systems, and lightweight network control equipment
GW-PA180I-F 180W 90-290Vac / 192-290Vdc 12V CCC, CB, CE Compact server systems, embedded 12V platforms, industrial control devices, and serviceable hot swap equipment
GW-PA300I-F 300W 90-290Vac / 192-290Vdc 12V CCC, CE Higher-load 12V control platforms, compact server nodes, and network equipment requiring more power headroom
GW-PA600I-FS 600W 90-290Vac / 192-288Vdc 12V / 50A; 5V / 2A CCC, CB, CE 12V systems requiring auxiliary 5V support, mid-power server hardware, and cabinet-mounted infrastructure
GW-PA600I-P-F 600W 90-290Vac / 190-290Vdc 56V CCC, CB, CE 56V power architecture platforms, communication equipment, and specialized high-voltage distribution systems
GW-PA1000I-P-F 1000W 90-290Vac / 192-288Vdc 56V CCC, CB, CE Higher-capacity 56V infrastructure, telecom-style equipment, and distributed power systems
GW-PA1600I 1600W 90-290Vac / 192-288Vdc 12V / 133.4A; 5Vsb / 2A CCC High-current 12V server platforms, storage systems, and larger computing infrastructure
GW-PA2700I 2700W 90-290Vac / 192-288Vdc 54V CCC, CB, CE, UL High-power 54V platforms, AI infrastructure, telecom systems, and dense power distribution environments
GW-PAH3000I-F 3000W 90-290Vac / 188-400Vdc 53.5V CQC, CB, CE High-capacity 53.5V systems, demanding infrastructure cabinets, and heavy-load power platforms

DEPLOYMENT SCENARIOS

Where GW-PA180I-F fits best.

The GW-PA180I-F is designed for compact systems that require stable 12V output, wide AC / DC input compatibility, and convenient hot swap maintenance. It is suitable for compact server hardware, embedded computing platforms, network control devices, industrial cabinets, and other infrastructure equipment where power stability and service accessibility are important.

Scenario System Requirement Why GW-PA180I-F Fits
Compact Server Systems Stable 12V power for small server nodes, control boards, and internal system components 180W output provides practical power capacity for compact server platforms without oversized power design
Embedded 12V Platforms Reliable low-voltage DC output for embedded processors, boards, and device-level control modules 12V output supports standard embedded system power architecture
Industrial Control Equipment Power support for control devices, monitoring units, and compact automation hardware Wide 90-290Vac / 192-290Vdc input helps adapt to different industrial power environments
Network Control Devices Stable DC power for communication control units, access devices, and compact networking equipment Hot swap structure supports easier replacement and maintenance in serviceable equipment
Cabinet-Mounted Systems Compact power module for equipment installed inside cabinets or infrastructure enclosures 180W capacity is suitable for lower-power cabinet equipment and auxiliary system modules
Backup or DC Distribution Environments Compatibility with DC input power architecture where applicable 192-290Vdc support improves flexibility for systems using DC distribution or backup power paths

POWER DESIGN

Reliability notes for continuous operation.

The GW-PA180I-F is built for compact infrastructure systems that require stable 12V output from a wide AC or DC input source. Compared with higher-power models in the same Hot Swap series, this model focuses on lower-power 12V applications where compact integration, service convenience, and practical power capacity are more important than high-current output.

  • 180W output capacity supports compact server nodes, embedded computing devices, industrial control modules, network control equipment, and cabinet-mounted systems.
  • 90-290Vac / 192-290Vdc input provides flexible compatibility for different AC and DC power distribution environments.
  • 12V output design supports standard low-voltage system architecture used in many computing, control, and embedded platforms.
  • Hot swap structure helps simplify module replacement and supports easier maintenance in compatible systems.
  • CCC, CB, and CE safety support makes the model suitable for commercial equipment, infrastructure deployments, and export-oriented projects.
  • Lower-power positioning makes this model suitable for compact platforms where high-capacity PSU models would be unnecessary or oversized.
  • Practical system integration helps support equipment designs that require stable power delivery, manageable heat output, and simplified service access.
  • Final system validation should confirm GW-PA180I-F operation under the expected input range, peak load, airflow, ambient temperature, and hot-swap service conditions before deployment.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, and system load before integration.

Installation / Operation Item Guidance
Input Voltage Matching Confirm that the target system supports 90-290Vac / 192-290Vdc input before installation
Output Requirement Verify that the equipment requires 12V output and that the system load is within the 180W power range
Load Planning Keep long-term operating load within a suitable range to support stable output and service life
Chassis Compatibility Make sure the equipment supports the correct hot swap power module structure and installation method
Connector Matching Confirm connector position, electrical interface, and system-level compatibility before integration
Thermal Clearance Keep the PSU intake and exhaust areas clear to avoid heat buildup around the power module
Module Installation Ensure the power supply is fully seated and properly connected before powering on the system
Routine Maintenance Check dust buildup, connector condition, fan behavior, and system thermal status during regular service

FAQ

Frequently asked questions about GW-PA180I-F.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the GW-PA180I-F?

The GW-PA180I-F is a 180W Hot Swap power supply designed for compact 12V systems, including small server platforms, embedded computing equipment, network control devices, and industrial control systems.

What input voltage range does this model support?

It supports 90-290Vac / 192-290Vdc input, making it suitable for equipment that may operate in different AC or DC power environments.

What output voltage does the GW-PA180I-F provide?

The model provides 12V output, which is suitable for many compact computing, embedded, control, and infrastructure platforms.

What is the main advantage of the GW-PA180I-F?

Its main advantage is the combination of 180W 12V output, wide AC / DC input compatibility, and hot swap service convenience for compact infrastructure equipment.

Is this model suitable for compact server systems?

Yes. The 180W output and 12V architecture make it suitable for compact server systems, small computing nodes, and low-to-medium power server-related platforms.

Can this model be used in industrial control equipment?

Yes. Its 12V output, wide input range, and hot swap design make it suitable for industrial control devices, cabinet-mounted equipment, monitoring units, and embedded control platforms.

How should I choose between GW-PA180I-F and higher-power models?

Choose the GW-PA180I-F when the system requires a compact 12V / 180W power solution. For larger loads, higher current demand, or 54V / 56V power architecture, other models in the Hot Swap series may be more suitable.

What should be checked before integrating this PSU into a system?

Before integration, confirm the input voltage range, 12V output requirement, total system load, hot swap mechanical compatibility, connector matching, thermal design, and installation clearance.

KEEP EXPLORING

Related products

View category →