Get a quote
PRODUCT VIEW G1231-0150WNA product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

G1231-0150WNA

G1231

INQUIRY READY

G1231-0150WNA

Gospower / 1+1 1U PDB / G1231

G1231-0150WNA applies 150W capacity across Compact Servers, Edge Storage, and Network Appliances; the result is practical deployment in systems that cannot tolerate unstable power.

Output Power (W):
150
Length (mm):
226
Width (mm):
156
Height (mm):
41.5
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The G1231-0150WNA is suitable for compact systems that require board-level power distribution rather than a standalone high-wattage PSU module. Its 150W output capacity and multi-rail design make it a practical fit for lightweight servers, edge storage, network appliances, control systems, and embedded computing platforms where stable internal power routing and compact installation are important.

Before integrating the G1231-0150WNA, confirm the mating connector or backplane, input source, output-rail requirements, hot-swap sequence, airflow direction, monitoring interface, redundancy behavior, and service clearance against the target platform.

CORE ADVANTAGES

150W 1U Power Distribution Board for Compact Servers, Edge Storage, and Network Appliances

150W Power Distribution for Compact Systems The G1231-0150WNA is designed for compact servers, edge storage systems, network appliances, embedded platforms, and lightweight computing equipment that require reliable board-level power distribution in a 1U system layout.

01

150W Power Distribution for Compact Systems The G1231-0150WNA is designed for compact servers, edge storage systems, network appliances, embedded platforms, and lightweight computing equipment that require reliable board-level power distribution in a 1U system layout.

02

1U Power Distribution Board Design With a compact 226 × 156 × 41.5 mm form factor, this model supports space-constrained chassis designs where multiple system rails must be distributed efficiently within a limited internal layout.

03

1+1 Redundant Power Architecture The board supports a 1+1 redundant configuration, helping improve power availability in systems where continuous operation, service access, and failover readiness are important.

04

Multiple Output Rails for System Integration The G1231-0150WNA provides +12V, +5V, +3.3V, -12V, and +5V standby outputs, supporting processors, control boards, storage logic, management circuits, cooling modules, and auxiliary system components.

05

Designed for Server, Storage, and Network Platforms This power distribution board is suitable for compact server nodes, edge storage appliances, NAS platforms, firewall systems, routing equipment, and embedded network hardware.

06

Built for Reliable System-Level Power Delivery With redundant power support, multiple output rails, compact mechanical integration, and safety/EMC compliance options, the G1231-0150WNA helps simplify internal power distribution in compact infrastructure equipment.

MODEL SELECTION

Compare Gospower power options.

Review nearby Gospower models and select the power level, output architecture, efficiency grade, and form factor that best match the target system.

Model Power Use Role Input Form Factor Best-Fit Application
G1231-0150WNA 150w Basic multi-rail distribution for control and standby subsystems AC/DC 1+1 PDB BMC boards, fan control circuits, sensor modules, and low-power embedded management units
G1231-0250WNA 250w Redundant PDB for small edge and access-layer hardware AC/DC 1+1 PDB Compact access gateways, small firewall appliances, remote control boxes, and branch network devices
G1231-0350WNA 350w Storage-oriented power distribution for compact data equipment AC/DC 1+1 PDB NAS controllers, backup appliances, edge storage shelves, and lightweight data collection nodes
G1231-0460WNA 460w Mixed-load distribution board for network service appliances AC/DC 1+1 PDB SD-WAN platforms, routing appliances, security gateways, and compact service nodes
G1231-0550WNA 550w Higher-margin PDB for compact compute and storage integration AC/DC 1+1 PDB Micro server clusters, edge hosting boxes, storage-cache appliances, and appliance-based server systems
G1231-0800WNA 800w Integrated power distribution for multi-service edge platforms AC/DC 1+1 PDB Micro data center units, network aggregation appliances, dense NAS platforms, and edge compute-storage systems
G1231-1300WNA 1300w High-capacity PDB for dense appliance and hybrid processing systems AC/DC 1+1 PDB Virtualization appliances, hybrid compute-storage nodes, security service clusters, and edge analytics platforms
G1231-1600WNA 1600w Peak-load redundant PDB for scalable compact infrastructure AC/DC 1+1 PDB Multi-node gateway clusters, high-density appliance racks, edge cloud systems, and scalable service platforms

DEPLOYMENT SCENARIOS

Where G1231-0150WNA fits best.

The G1231-0150WNA is suitable for compact systems that require board-level power distribution rather than a standalone high-wattage PSU module. Its 150W output capacity and multi-rail design make it a practical fit for lightweight servers, edge storage, network appliances, control systems, and embedded computing platforms where stable internal power routing and compact installation are important.

Scenario System Requirement Why G1231-0150WNA Fits
Compact Server Nodes Internal rail distribution for CPU board, storage logic, fans, and management circuits Multi-output design supports essential low-power server subsystems
Edge Storage Appliances Stable power routing for storage controllers, small drive groups, and system logic +12V, +5V, and +3.3V rails support storage-related hardware
Network Appliances Power distribution for routing boards, firewall modules, interface cards, and fans Compact 1U board design fits network appliance chassis
Embedded Computing Systems Reliable power delivery for control boards, I/O modules, and auxiliary circuits Multiple output rails support embedded hardware integration
Lightweight NAS Platforms Power support for controller boards, standby logic, storage electronics, and cooling 150W capacity fits moderate storage and edge data workloads
Redundant System Designs Improved power availability for compact systems requiring failover support 1+1 redundant configuration supports higher service continuity

POWER DESIGN

Reliability notes for continuous operation.

The G1231-0150WNA is built for compact server, storage, networking, and embedded systems where internal power distribution, multiple output rails, and redundant architecture are more important than high total PSU output. Its 1U board layout helps system designers manage several voltage rails inside space-limited chassis while supporting 1+1 redundancy for improved availability.

  • 150W power distribution capacity supports compact servers, edge storage systems, NAS platforms, network appliances, embedded systems, and lightweight infrastructure devices.
  • 1+1 redundant design helps improve system availability by supporting backup power path architecture in compatible chassis.
  • +12V output at 12A supports main system loads, cooling modules, drive-related components, and board-level power distribution.
  • +5V output at 10A supports logic circuits, storage electronics, interface boards, and auxiliary components.
  • +3.3V output at 8A supports low-voltage digital circuits, control logic, and onboard electronic modules.
  • -12V output at 0.5A supports legacy or auxiliary signal requirements in compatible systems.
  • +5V standby output at 3A supports standby logic, management controllers, monitoring circuits, and system wake functions.
  • Compact 226 × 156 × 41.5 mm mechanical design supports dense 1U chassis and space-restricted internal layouts.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, redundancy requirements, and system load before integration.

Installation / Operation Item Guidance
System Role Check Confirm that the target system requires a power distribution board rather than a standalone PSU module
Redundancy Planning Verify that the chassis and upstream power modules support the intended 1+1 redundant configuration
Chassis Fitment Confirm the 226 × 156 × 41.5 mm mechanical size before installation
Output Rail Matching Check +12V, +5V, +3.3V, -12V, and +5V standby requirements against the target system load
Load Budget Review Calculate total board-level demand from control boards, storage logic, network modules, fans, and standby circuits
Connector Compatibility Confirm connector layout, pin definition, cable harness design, and mating interface before integration
Thermal Layout Ensure airflow around the board and nearby components is sufficient for continuous operation
System Validation Test startup behavior, standby function, redundancy behavior, and rail stability before deployment

FAQ

Frequently asked questions about G1231-0150WNA.

Key answers for specification matching, installation planning, and system integration.

What type of product is the G1231-0150WNA?

The G1231-0150WNA is a 150W 1U power distribution board designed for compact servers, edge storage systems, network appliances, embedded platforms, and lightweight infrastructure equipment.

What is the size of this model?

This model uses a compact 1U board structure with a size of 226 × 156 × 41.5 mm, making it suitable for space-constrained chassis and dense system layouts.

What systems is this model suitable for?

It is suitable for compact server nodes, NAS systems, edge storage appliances, firewall platforms, routing equipment, embedded computing systems, and low-power network hardware.

Does the G1231-0150WNA support redundant power design?

Yes. The board supports a 1+1 redundant configuration, helping improve power availability in compatible system architectures.

What output rails does this board provide?

The G1231-0150WNA provides multiple output rails, including +12V at 12A, +5V at 10A, +3.3V at 8A, -12V at 0.5A, and +5V standby at 3A.

Why is this model suitable for compact storage systems?

Its multi-rail output design can support storage controllers, drive-related logic, management circuits, standby functions, and cooling modules in compact storage appliances.

What makes this model different from a CRPS power supply?

A CRPS power supply converts input power into system output power, while the G1231-0150WNA is positioned as a power distribution board that distributes multiple rails inside the system and supports redundant architecture.

What should be checked before integrating this board?

Confirm the chassis size, connector interface, output rail requirements, total load budget, redundancy design, cable harness layout, airflow path, and system-level compatibility before integration.

KEEP EXPLORING

Related products

View category →