Get a quote
PRODUCT VIEW G1231-0250WNA product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

G1231-0250WNA

G1231

INQUIRY READY

G1231-0250WNA

Gospower / 1+1 1U PDB / G1231

G1231-0250WNA brings together 250W capacity for Enterprise Servers, Mid-Tier Storage Systems, and High-Density Networking, with an emphasis on steady operation across always-on infrastructure.

Output Power (W):
250
Length (mm):
226
Width (mm):
156
Height (mm):
41.5
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The G1231-0250WNA is suitable for compact systems that require more power headroom than low-load control-board platforms while still using a 1U board-level power distribution structure. Its 250W output capacity and multi-rail design make it a practical fit for enterprise servers, mid-tier storage, network appliances, remote infrastructure, and embedded control systems where stable internal power routing, redundancy support, and compact integration are important.

Before integrating the G1231-0250WNA, confirm the mating connector or backplane, input source, output-rail requirements, hot-swap sequence, airflow direction, monitoring interface, redundancy behavior, and service clearance against the target platform.

CORE ADVANTAGES

250W 1U Power Distribution Board for Enterprise Servers, Mid-Tier Storage Systems, and High-Density Networking

250W Power Distribution for Compact Infrastructure The G1231-0250WNA is designed for compact servers, mid-tier storage systems, networking equipment, embedded platforms, and enterprise infrastructure devices that require reliable board-level power distribution in a 1U system layout.

01

250W Power Distribution for Compact Infrastructure The G1231-0250WNA is designed for compact servers, mid-tier storage systems, networking equipment, embedded platforms, and enterprise infrastructure devices that require reliable board-level power distribution in a 1U system layout.

02

1U Power Distribution Board Design With a compact 226 × 156 × 41.5 mm form factor, this model supports space-constrained chassis designs where multiple output rails must be distributed efficiently across system boards, storage logic, management circuits, and cooling components.

03

1+1 Redundant Power Architecture The board supports a 1+1 redundant configuration, helping improve system availability in equipment where stable operation, backup power paths, and service continuity are important.

04

Multiple Output Rails for System Integration The G1231-0250WNA provides +12V, +5V, +3.3V, -12V, and +5V standby outputs, supporting server boards, storage controllers, network modules, monitoring circuits, fans, and auxiliary system components.

05

Designed for Server, Storage, and Networking Platforms This power distribution board is suitable for enterprise server nodes, mid-tier storage systems, access-layer network appliances, routing platforms, firewall systems, and compact embedded infrastructure.

06

Built for Reliable Board-Level Power Delivery With redundant architecture, multi-rail output support, compact mechanical integration, and safety/EMC compliance options, the G1231-0250WNA helps simplify internal power distribution for compact enterprise and edge infrastructure equipment.

MODEL SELECTION

Compare Gospower power options.

Review nearby Gospower models and select the power level, output architecture, efficiency grade, and form factor that best match the target system.

Model Power Use Role Input Form Factor Best-Fit Application
G1231-0150WNA 150w Basic multi-rail distribution for control and standby subsystems AC/DC 1+1 PDB BMC boards, fan control circuits, sensor modules, and low-power embedded management units
G1231-0250WNA 250w Redundant PDB for small edge and access-layer hardware AC/DC 1+1 PDB Compact access gateways, small firewall appliances, remote control boxes, and branch network devices
G1231-0350WNA 350w Storage-oriented power distribution for compact data equipment AC/DC 1+1 PDB NAS controllers, backup appliances, edge storage shelves, and lightweight data collection nodes
G1231-0460WNA 460w Mixed-load distribution board for network service appliances AC/DC 1+1 PDB SD-WAN platforms, routing appliances, security gateways, and compact service nodes
G1231-0550WNA 550w Higher-margin PDB for compact compute and storage integration AC/DC 1+1 PDB Micro server clusters, edge hosting boxes, storage-cache appliances, and appliance-based server systems
G1231-0800WNA 800w Integrated power distribution for multi-service edge platforms AC/DC 1+1 PDB Micro data center units, network aggregation appliances, dense NAS platforms, and edge compute-storage systems
G1231-1300WNA 1300w High-capacity PDB for dense appliance and hybrid processing systems AC/DC 1+1 PDB Virtualization appliances, hybrid compute-storage nodes, security service clusters, and edge analytics platforms
G1231-1600WNA 1600w Peak-load redundant PDB for scalable compact infrastructure AC/DC 1+1 PDB Multi-node gateway clusters, high-density appliance racks, edge cloud systems, and scalable service platforms

DEPLOYMENT SCENARIOS

Where G1231-0250WNA fits best.

The G1231-0250WNA is suitable for compact systems that require more power headroom than low-load control-board platforms while still using a 1U board-level power distribution structure. Its 250W output capacity and multi-rail design make it a practical fit for enterprise servers, mid-tier storage, network appliances, remote infrastructure, and embedded control systems where stable internal power routing, redundancy support, and compact integration are important.

Scenario System Requirement Why G1231-0250WNA Fits
Enterprise Server Nodes Internal power distribution for server boards, fans, management logic, and peripheral modules 250W capacity provides practical headroom for compact server subsystems
Mid-Tier Storage Systems Stable rail distribution for storage controllers, backplane logic, small drive groups, and cooling +12V, +5V, and +3.3V outputs support storage-related system electronics
Network Appliances Power routing for switching boards, routing modules, firewall logic, interface cards, and fans Compact 1U PDB design fits dense network appliance chassis
Edge Control Platforms Reliable power delivery for embedded control boards, I/O modules, sensors, and standby circuits Multi-output rail design supports mixed low-voltage system requirements
Branch Infrastructure Devices Stable internal power for small gateways, access controllers, security boxes, and monitoring hardware 1+1 redundancy supports service continuity in distributed sites
Redundant Compact Systems Backup power path support for compact equipment requiring higher availability 1+1 redundant architecture helps improve system-level reliability

POWER DESIGN

Reliability notes for continuous operation.

The G1231-0250WNA is built for compact server, storage, networking, and embedded systems where internal power distribution, multiple output rails, and redundant architecture are more important than standalone PSU capacity. Its 1U board layout helps system designers distribute several voltage rails inside dense chassis while supporting 1+1 redundancy for improved system availability.

  • 250W power distribution capacity supports enterprise server nodes, storage systems, network appliances, branch infrastructure devices, embedded systems, and compact edge equipment.
  • 1+1 redundant design helps improve power availability by supporting backup power path architecture in compatible chassis.
  • +12V output at 20.83A supports main system loads, server boards, cooling modules, storage-related components, and board-level power distribution.
  • +5V output at 15A supports storage electronics, logic circuits, interface boards, auxiliary modules, and control-related components.
  • +3.3V output at 8A supports low-voltage digital circuits, embedded logic, communication modules, and onboard electronic devices.
  • -12V output at 0.5A supports legacy or auxiliary signal requirements in compatible system designs.
  • +5V standby output at 3A supports standby logic, management controllers, monitoring circuits, and system wake functions.
  • Compact 226 × 156 × 41.5 mm mechanical design supports dense 1U chassis and space-restricted internal layouts.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, redundancy requirements, and system load before integration.

Installation / Operation Item Guidance
System Role Check Confirm that the target system requires a power distribution board rather than a standalone CRPS power supply module
Redundancy Planning Verify that the chassis and upstream power modules support the intended 1+1 redundant configuration
Chassis Fitment Confirm the 226 × 156 × 41.5 mm mechanical size before installation
Output Rail Matching Check +12V, +5V, +3.3V, -12V, and +5V standby requirements against the target system load
Load Budget Review Calculate total board-level demand from server boards, storage logic, network modules, fans, standby circuits, and control components
Connector Compatibility Confirm connector layout, pin definition, cable harness design, and mating interface before integration
Thermal Layout Ensure sufficient airflow around the board, cable harnesses, and nearby heat-generating components
System Validation Test startup behavior, standby function, redundancy behavior, rail stability, and load response before deployment

FAQ

Frequently asked questions about G1231-0250WNA.

Key answers for specification matching, installation planning, and system integration.

What type of product is the G1231-0250WNA?

The G1231-0250WNA is a 250W 1U power distribution board designed for enterprise servers, mid-tier storage systems, network appliances, embedded platforms, and compact infrastructure equipment.

What is the size of this model?

This model uses a compact 1U board structure with a size of 226 × 156 × 41.5 mm, making it suitable for dense system layouts and space-constrained chassis designs.

What systems is this model suitable for?

It is suitable for compact server nodes, storage systems, firewall appliances, routing platforms, access-layer network equipment, embedded control platforms, and branch infrastructure devices.

Does the G1231-0250WNA support redundant power design?

Yes. The board supports a 1+1 redundant configuration, helping improve power availability in compatible system architectures.

What output rails does this board provide?

The G1231-0250WNA provides multiple output rails, including +12V at 20.83A, +5V at 15A, +3.3V at 8A, -12V at 0.5A, and +5V standby at 3A.

Why is this model suitable for mid-tier storage systems?

Its multi-rail output design can support storage controllers, backplane logic, drive-related electronics, management circuits, standby functions, and cooling modules in compact storage systems.

What makes this model different from the G1231-0150WNA?

Compared with the G1231-0150WNA, the G1231-0250WNA provides a higher power distribution capacity and a stronger +12V output, making it better suited for compact servers, storage equipment, and network appliances with higher internal load demand.

What should be checked before integrating this board?

Confirm the chassis size, connector interface, output rail requirements, total load budget, redundancy design, cable harness layout, airflow path, and system-level compatibility before integration.

KEEP EXPLORING

Related products

View category →