Get a quote
PRODUCT VIEW G1231-0350WNA product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

G1231-0350WNA

G1231

INQUIRY READY

G1231-0350WNA

Gospower / 1+1 1U PDB / G1231

G1231-0350WNA delivers a practical power foundation for High-Availability Servers, Storage, Networking, and HPC Applications. Its combination of 350W capacity helps maintain controlled delivery for equipment expected to run for long periods.

Output Power (W):
350
Length (mm):
226
Width (mm):
156
Height (mm):
41.5
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The G1231-0350WNA is suitable for compact systems that require stronger board-level power distribution than 150W or 250W PDB models while still maintaining a space-saving 1U architecture. Its 350W output capacity and multi-rail design make it a practical fit for compact servers, storage-control platforms, network appliances, embedded systems, and lightweight HPC equipment where stable internal rail distribution, redundancy support, and system integration flexibility are important.

Before integrating the G1231-0350WNA, confirm the mating connector or backplane, input source, output-rail requirements, hot-swap sequence, airflow direction, monitoring interface, redundancy behavior, and service clearance against the target platform.

CORE ADVANTAGES

350W 1U Power Distribution Board for High-Availability Servers, Storage, Networking, and HPC Applications

350W Power Distribution for Higher-Demand Compact Systems The G1231-0350WNA is designed for compact servers, storage platforms, networking equipment, embedded infrastructure, and lightweight HPC systems that require reliable board-level power distribution with more power headroom than entry-level PDB models.

01

350W Power Distribution for Higher-Demand Compact Systems The G1231-0350WNA is designed for compact servers, storage platforms, networking equipment, embedded infrastructure, and lightweight HPC systems that require reliable board-level power distribution with more power headroom than entry-level PDB models.

02

1U Power Distribution Board Design With a compact 226 × 156 × 41.5 mm form factor, this model supports dense chassis layouts where multiple voltage rails must be distributed efficiently across server boards, storage logic, network modules, cooling devices, and management circuits.

03

1+1 Redundant Power Architecture The board supports a 1+1 redundant configuration, helping improve system availability in compact equipment where stable operation, backup power paths, and maintenance flexibility are important.

04

Multiple Output Rails for System Integration The G1231-0350WNA provides +12V, +5V, +3.3V, -12V, and +5V standby outputs, supporting processors, storage controllers, interface boards, control logic, fans, standby circuits, and auxiliary system electronics.

05

Designed for Server, Storage, Network, and HPC Platforms This power distribution board is suitable for compact server nodes, storage-control systems, network appliances, small virtualization platforms, lightweight HPC equipment, and embedded infrastructure requiring organized internal power delivery.

06

Built for Reliable System-Level Power Delivery With redundant architecture, multi-rail output support, compact mechanical integration, and safety/EMC compliance options, the G1231-0350WNA helps simplify internal power distribution for compact systems with higher availability requirements.

MODEL SELECTION

Compare Gospower power options.

Review nearby Gospower models and select the power level, output architecture, efficiency grade, and form factor that best match the target system.

Model Power Use Role Input Form Factor Best-Fit Application
G1231-0150WNA 150w Basic multi-rail distribution for control and standby subsystems AC/DC 1+1 PDB BMC boards, fan control circuits, sensor modules, and low-power embedded management units
G1231-0250WNA 250w Redundant PDB for small edge and access-layer hardware AC/DC 1+1 PDB Compact access gateways, small firewall appliances, remote control boxes, and branch network devices
G1231-0350WNA 350w Storage-oriented power distribution for compact data equipment AC/DC 1+1 PDB NAS controllers, backup appliances, edge storage shelves, and lightweight data collection nodes
G1231-0460WNA 460w Mixed-load distribution board for network service appliances AC/DC 1+1 PDB SD-WAN platforms, routing appliances, security gateways, and compact service nodes
G1231-0550WNA 550w Higher-margin PDB for compact compute and storage integration AC/DC 1+1 PDB Micro server clusters, edge hosting boxes, storage-cache appliances, and appliance-based server systems
G1231-0800WNA 800w Integrated power distribution for multi-service edge platforms AC/DC 1+1 PDB Micro data center units, network aggregation appliances, dense NAS platforms, and edge compute-storage systems
G1231-1300WNA 1300w High-capacity PDB for dense appliance and hybrid processing systems AC/DC 1+1 PDB Virtualization appliances, hybrid compute-storage nodes, security service clusters, and edge analytics platforms
G1231-1600WNA 1600w Peak-load redundant PDB for scalable compact infrastructure AC/DC 1+1 PDB Multi-node gateway clusters, high-density appliance racks, edge cloud systems, and scalable service platforms

DEPLOYMENT SCENARIOS

Where G1231-0350WNA fits best.

The G1231-0350WNA is suitable for compact systems that require stronger board-level power distribution than 150W or 250W PDB models while still maintaining a space-saving 1U architecture. Its 350W output capacity and multi-rail design make it a practical fit for compact servers, storage-control platforms, network appliances, embedded systems, and lightweight HPC equipment where stable internal rail distribution, redundancy support, and system integration flexibility are important.

Scenario System Requirement Why G1231-0350WNA Fits
Compact Server Nodes Internal power distribution for server boards, memory, cooling fans, and management logic 350W capacity provides stronger headroom for compact server subsystems
Storage-Control Platforms Stable rail distribution for storage controllers, backplane logic, drive-related electronics, and fans +12V, +5V, and +3.3V outputs support storage-control hardware
Network Appliances Power routing for switching boards, routing modules, firewall logic, interface cards, and thermal systems Compact 1U PDB design fits dense appliance chassis
Lightweight HPC Systems Reliable board-level power for processors, control logic, interface boards, and cooling components Higher output capacity supports performance-oriented compact systems
Embedded Infrastructure Multi-rail power delivery for I/O modules, controllers, sensors, and standby circuits Multiple output rails support mixed low-voltage system requirements
Redundant Compact Platforms Improved power availability for systems requiring backup power path design 1+1 redundant architecture supports stronger service continuity

POWER DESIGN

Reliability notes for continuous operation.

The G1231-0350WNA is built for compact server, storage, networking, embedded, and lightweight HPC systems where internal power distribution, multiple output rails, and redundant architecture are more important than standalone PSU capacity. Its 1U board layout helps system designers distribute several voltage rails inside dense chassis while supporting 1+1 redundancy for improved system availability.

  • 350W power distribution capacity supports compact servers, storage-control platforms, network appliances, lightweight HPC systems, embedded infrastructure, and redundant compact systems.
  • 1+1 redundant design helps improve power availability by supporting backup power path architecture in compatible chassis.
  • +12V output at 29A supports main system loads, processor boards, storage-related components, cooling modules, and board-level power distribution.
  • +5V output at 20A supports storage electronics, logic circuits, interface boards, auxiliary modules, and control-related components.
  • +3.3V output at 25A supports low-voltage digital circuits, embedded logic, communication modules, and onboard electronic devices.
  • -12V output at 0.5A supports legacy or auxiliary signal requirements in compatible system designs.
  • +5V standby output at 3A supports standby logic, management controllers, monitoring circuits, and system wake functions.
  • Compact 226 × 156 × 41.5 mm mechanical design supports dense 1U chassis and space-restricted internal layouts.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, redundancy requirements, and system load before integration.

Installation / Operation Item Guidance
System Role Check Confirm that the target system requires a power distribution board rather than a standalone CRPS power supply module
Redundancy Planning Verify that the chassis and upstream power modules support the intended 1+1 redundant configuration
Chassis Fitment Confirm the 226 × 156 × 41.5 mm mechanical size before installation
Output Rail Matching Check +12V, +5V, +3.3V, -12V, and +5V standby requirements against the target system load
Load Budget Review Calculate total board-level demand from server boards, storage logic, network modules, fans, standby circuits, and control components
Connector Compatibility Confirm connector layout, pin definition, cable harness design, and mating interface before integration
Thermal Layout Ensure sufficient airflow around the board, cable harnesses, and nearby heat-generating components
System Validation Test startup behavior, standby function, redundancy behavior, rail stability, and load response before deployment

FAQ

Frequently asked questions about G1231-0350WNA.

Key answers for specification matching, installation planning, and system integration.

What type of product is the G1231-0350WNA?

The G1231-0350WNA is a 350W 1U power distribution board designed for compact servers, storage-control platforms, network appliances, embedded infrastructure, and lightweight HPC systems.

What is the size of this model?

This model uses a compact 1U board structure with a size of 226 × 156 × 41.5 mm, making it suitable for dense system layouts and space-constrained chassis designs.

What systems is this model suitable for?

It is suitable for compact server nodes, storage-control systems, NAS platforms, firewall appliances, routing equipment, embedded control platforms, and lightweight performance computing equipment.

Does the G1231-0350WNA support redundant power design?

Yes. The board supports a 1+1 redundant configuration, helping improve power availability in compatible system architectures.

What output rails does this board provide?

The G1231-0350WNA provides multiple output rails, including +12V at 29A, +5V at 20A, +3.3V at 25A, -12V at 0.5A, and +5V standby at 3A.

Why is this model suitable for storage-control platforms?

Its multi-rail output design can support storage controllers, backplane logic, drive-related electronics, management circuits, standby functions, and cooling modules in compact storage systems.

What makes this model different from the G1231-0250WNA?

Compared with the G1231-0250WNA, the G1231-0350WNA provides higher power distribution capacity and stronger +12V, +5V, and +3.3V rail support, making it better suited for storage-control systems, network appliances, and compact server platforms with higher internal load demand.

What should be checked before integrating this board?

Confirm the chassis size, connector interface, output rail requirements, total load budget, redundancy design, cable harness layout, airflow path, and system-level compatibility before integration.

KEEP EXPLORING

Related products

View category →