Get a quote
PRODUCT VIEW G1232-0550WNA product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

G1232-0550WNA

G1232

INQUIRY READY

G1232-0550WNA

Gospower / DC-DC Gold 48V / G1232

G1232-0550WNA matches Compact Server Systems, Telecom Infrastructure, Edge & Network Devices, and High-Density Deployments with 550W capacity, helping operators achieve predictable operation in continuous-duty installations.

Output Power (W):
550
Length (mm):
185
Width (mm):
73.5
Height (mm):
40
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The G1232-0550WNA is suitable for compact DC-powered infrastructure that requires reliable 12V output, moderate power headroom, and space-efficient mechanical integration. Its 550W output makes it a strong fit for compact server deployments, telecom DC systems, edge cabinets, storage controllers, and remote network equipment where stable operation, monitoring visibility, and thermal reliability are important. System validation should cover standby behavior, load transitions, protection recovery, and monitoring compatibility under expected operating conditions. Allow practical headroom for startup demand and transient loads, while keeping intake and exhaust paths clear throughout continuous operation.

Before integrating the G1232-0550WNA, confirm the mating connector or backplane, input source, output-rail requirements, hot-swap sequence, airflow direction, monitoring interface, redundancy behavior, and service clearance against the target platform.

CORE ADVANTAGES

550W CRPS Power Supply Optimized for Compact Server and Telecom Deployments

550W Power for Compact Server and Telecom Systems The G1232-0550WNA is designed for compact server platforms, telecom infrastructure, storage equipment, distributed edge systems, and space-constrained deployments that require stable 550W power delivery from a DC input source.

01

550W Power for Compact Server and Telecom Systems The G1232-0550WNA is designed for compact server platforms, telecom infrastructure, storage equipment, distributed edge systems, and space-constrained deployments that require stable 550W power delivery from a DC input source.

02

Compact 1U CRPS Mechanical Design With a 185 × 73.5 × 40 mm form factor, this model supports compact server chassis, telecom shelves, edge cabinets, storage systems, and high-density hardware platforms where installation space and airflow design are important.

03

DC Input for Telecom and Distributed Infrastructure The unit supports a 36–72Vdc input range, making it suitable for telecom DC power systems, remote communication cabinets, distributed edge facilities, industrial equipment rooms, and DC bus-based infrastructure.

04

Stable 12V Main Output The unit provides a regulated 12V main output at 45.8A together with a 12V standby output at 2.1A, supporting processors, storage controllers, communication modules, edge boards, fans, and management circuits.

05

PMBus 1.2 Digital Power Monitoring With digital control and PMBus 1.2 support, the G1232-0550WNA enables compatible systems to monitor power status, telemetry, voltage behavior, fault information, and remote operating conditions.

06

Built for Reliable Compact Deployments Titanium-level efficiency, intelligent fan control, reverse airflow support, compact CRPS integration, and major safety and EMC compliance options help this model support dependable operation in compact server, telecom, edge, and storage environments.

MODEL SELECTION

Compare Gospower power options.

Review nearby Gospower models and select the power level, output architecture, efficiency grade, and form factor that best match the target system.

Model Power Output Current Efficiency Form Factor Best-Fit Application
G1232-0550WNA 550w 12V Gold CRPS Entry-level edge appliances for branch security, local storage, and lightweight network services
G1232-0800WNA 800w 12V Gold CRPS Telecom edge gateways handling caching, routing, and small-scale AI-assisted data processing
G1232-1300WNA 1300w 12V Gold CRPS Mid-density edge cloud nodes for virtualization, storage acceleration, and multi-service workloads
G1232-1600WNA 1600w 12V Gold CRPS High-load edge compute racks supporting clustered services, AI inference, and dense network traffic

DEPLOYMENT SCENARIOS

Where G1232-0550WNA fits best.

The G1232-0550WNA is suitable for compact DC-powered infrastructure that requires reliable 12V output, moderate power headroom, and space-efficient mechanical integration. Its 550W output makes it a strong fit for compact server deployments, telecom DC systems, edge cabinets, storage controllers, and remote network equipment where stable operation, monitoring visibility, and thermal reliability are important.

Scenario System Requirement Why G1232-0550WNA Fits
Compact Server Deployments Stable power for CPUs, memory, storage controllers, fans, and management boards 550W output provides practical headroom for compact server workloads
Telecom DC Systems Reliable operation from DC bus power in telecom shelves and communication cabinets 36–72Vdc input supports telecom-style DC infrastructure
Edge Network Cabinets Compact power for distributed compute, routing boards, storage, and cooling fans 1U CRPS form factor fits space-limited edge hardware
Storage Controllers Continuous 12V output for controller boards, compact drive groups, and backplane logic 45.8A main output supports storage-related platform demand
Remote Infrastructure Sites Managed power for distributed sites with limited service access PMBus 1.2 visibility supports diagnostics and remote supervision
Industrial Communication Systems Stable DC conversion for monitoring boards, control modules, and communication equipment Compact CRPS design supports cabinet-based industrial deployment

POWER DESIGN

Reliability notes for continuous operation.

The G1232-0550WNA is built for compact server, telecom, storage, and distributed edge infrastructure where DC input compatibility, regulated 12V output, and efficient thermal control are essential. Its 550W rating gives compact systems enough power margin for communication modules, storage controllers, edge processors, and management circuits while maintaining a space-saving CRPS footprint.

  • 550W output capacity supports compact servers, telecom DC systems, edge network cabinets, storage controllers, industrial communication systems, and remote infrastructure sites.
  • 12V main output at 45.8A supports processors, storage controllers, communication modules, edge boards, I/O modules, cooling fans, and auxiliary electronics.
  • 12V standby output at 2.1A supports management logic, standby circuits, monitoring boards, and system control functions.
  • 36–72Vdc input range makes the unit suitable for telecom DC power systems and distributed infrastructure using DC bus architecture.
  • Titanium-level efficiency helps reduce energy loss and heat buildup in compact operating environments.
  • PMBus 1.2 communication provides visibility into power status, telemetry, voltage behavior, fault information, and operating data in supported systems.
  • Intelligent fan control helps maintain cooling efficiency while reducing unnecessary acoustic output.
  • Reverse airflow support allows integration into different chassis, cabinet, telecom shelf, and edge system airflow layouts.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, redundancy requirements, and system load before integration.

Installation / Operation Item Guidance
Load Planning Review processor load, storage controller power, telecom module demand, network board load, fan consumption, and standby requirements before deployment
Chassis Fitment Confirm the 185 × 73.5 × 40 mm CRPS size before mechanical integration
Input Connection Use within the supported 36–72Vdc input range
Output Compatibility Verify that the target platform is designed for 12V main power input
Standby Power Check Confirm that the platform standby requirement matches the 2.1A 12V standby output
DC Power Design Confirm polarity, DC bus stability, grounding method, and protection design before installation
Airflow Direction Match standard or reverse airflow with the chassis cooling path
Monitoring Setup Use PMBus 1.2 where supported for telemetry, diagnostics, fault alerts, and remote maintenance visibility

FAQ

Frequently asked questions about G1232-0550WNA.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the G1232-0550WNA?

The G1232-0550WNA is a 550W CRPS DC/DC power supply designed for compact server platforms, telecom DC systems, storage equipment, edge cabinets, and distributed infrastructure.

What is the size of this model?

This model uses a compact 1U CRPS form factor with a size of 185 × 73.5 × 40 mm, making it suitable for compact server chassis, telecom shelves, storage systems, and space-constrained hardware platforms.

What input voltage range does it support?

The G1232-0550WNA supports a 36–72Vdc input range, making it suitable for telecom DC power systems, remote cabinets, distributed edge equipment, and DC bus-based infrastructure.

Does the G1232-0550WNA support PMBus monitoring?

Yes. The unit supports PMBus 1.2, allowing compatible systems to monitor power status, telemetry, voltage behavior, fault information, and operating conditions.

Why is this model suitable for compact server deployments?

Its 550W output, compact CRPS size, 12V main rail, and DC input design make it suitable for compact servers that need stable power delivery without using a larger PSU format.

How does this PSU support telecom DC infrastructure?

The 36–72Vdc input range matches common telecom-style DC power environments, while the regulated 12V output supports communication modules, control boards, fans, and management circuits.

What makes this model useful for edge cabinets?

Its compact 1U CRPS structure, 550W capacity, PMBus visibility, and reverse airflow option make it practical for distributed edge systems where space, cooling, and remote service access are limited.

What should be checked before integrating this PSU?

Confirm the 36–72Vdc input design, 12V main input requirement, 12V standby demand, connector compatibility, chassis clearance, airflow direction, reverse airflow requirement, thermal margin, and PMBus support before deployment.

KEEP EXPLORING

Related products

View category →