Get a quote
PRODUCT VIEW G1395-3500WNA product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

G1395-3500WNA

G1395

INQUIRY READY

G1395-3500WNA

Gospower / AC/DC Titanium / G1395

G1395-3500WNA offers 3500W capacity to PoE Switches, Networking Equipment, and Telecom Infrastructure. That balance supports reliable power behavior under changing system loads.

Output Power (W):
3500
Length (mm):
185
Width (mm):
73.5
Height (mm):
40
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The G1395-3500WNA is suitable for platforms that require higher-voltage output and greater total power capacity than standard 12V server PSU applications. Its 3500W output and 64.22V main rail make it a strong fit for high-power PoE switches, telecom distribution systems, large access networks, edge AI communication nodes, and data-heavy network environments where power stability, cooling control, and remote diagnostics are important. Installation planning should account for ambient temperature, pressure drop, service access, and the electrical limits of the surrounding platform. System validation should cover standby behavior, load transitions, protection recovery, and monitoring compatibility under expected operating conditions.

Before integrating the G1395-3500WNA, confirm the mating connector or backplane, input source, output-rail requirements, hot-swap sequence, airflow direction, monitoring interface, redundancy behavior, and service clearance against the target platform.

CORE ADVANTAGES

3500W CRPS Power Supply for PoE Switches, Networking, Telecom, and AI Systems

3500W Power for High-Burst Network Loads The G1395-3500WNA is designed for large PoE systems, networking equipment, telecom infrastructure, AI edge systems, and high-burst data processing environments that require strong 3500W power delivery in a compact CRPS module.

01

3500W Power for High-Burst Network Loads The G1395-3500WNA is designed for large PoE systems, networking equipment, telecom infrastructure, AI edge systems, and high-burst data processing environments that require strong 3500W power delivery in a compact CRPS module.

02

Compact 1U CRPS Mechanical Design With a 185 × 73.5 × 40 mm form factor, this model supports dense PoE switch chassis, telecom power shelves, network access platforms, edge cabinets, and high-density system layouts where space efficiency is important.

03

64.22V Main Output for High-Power PoE Platforms The unit provides a 64.22V main output at 55A together with a 12V standby output at 3A, supporting PoE distribution, switching boards, telecom modules, control logic, and auxiliary management circuits.

04

Wide AC and DC Input Compatibility It supports 90–264Vac AC input and 180–300Vdc DC input, allowing flexible deployment across enterprise networks, telecom facilities, edge sites, data center racks, and global mixed-power environments.

05

PMBus 1.2 Digital Power Monitoring With full digital control and PMBus 1.2 support, the G1395-3500WNA enables compatible systems to monitor power status, telemetry, voltage behavior, fault information, and remote operating conditions.

06

Built for Reliable Large-Scale Network Power Platinum-level efficiency, active PFC, smart fan control, reverse airflow support, and major safety and EMC compliance options help this model support stable operation in demanding PoE, telecom, networking, and AI edge environments.

MODEL SELECTION

Compare Gospower power options.

Review nearby Gospower models and select the power level, output architecture, efficiency grade, and form factor that best match the target system.

Model Power Output Current Efficiency Form Factor Best-Fit Application
G1395-3000WNA 3000w 12V Titantium CRPS Hybrid compute clusters and data analytics platforms
G1395-3500WNA 3500w 12V Titantium CRPS Large-scale AI workloads and high-burst data processing

DEPLOYMENT SCENARIOS

Where G1395-3500WNA fits best.

The G1395-3500WNA is suitable for platforms that require higher-voltage output and greater total power capacity than standard 12V server PSU applications. Its 3500W output and 64.22V main rail make it a strong fit for high-power PoE switches, telecom distribution systems, large access networks, edge AI communication nodes, and data-heavy network environments where power stability, cooling control, and remote diagnostics are important.

Scenario System Requirement Why G1395-3500WNA Fits
High-Power PoE Switches Stable high-voltage output for multiple PoE ports, switching boards, and control logic 3500W capacity and 64.22V main rail support larger PoE power budgets
Large Access Networks Reliable delivery for aggregation switches, access platforms, and interface modules Compact CRPS design fits dense network access chassis
Telecom Power Shelves Continuous output for telecom equipment, communication modules, and control boards Wide AC/DC input supports telecom and mixed-power infrastructure
Edge AI Communication Nodes Power support for local AI processing, uplinks, storage, and auxiliary electronics High output capacity supports combined AI and network workloads
Security & Surveillance Infrastructure Stable power for PoE cameras, access devices, monitoring switches, and edge controllers 64.22V architecture supports PoE-driven device networks
High-Burst Data Processing Managed power for systems with changing traffic, switching, and compute demand PMBus 1.2 visibility supports telemetry, fault awareness, and service planning

POWER DESIGN

Reliability notes for continuous operation.

The G1395-3500WNA is built for PoE, networking, telecom, and AI edge systems where high-capacity voltage delivery, compact CRPS integration, and efficient cooling are essential. Its 3500W rating provides strong operating margin for large PoE power budgets, dense communication platforms, and high-burst network environments.

  • 3500W output capacity supports large PoE switches, telecom systems, enterprise network platforms, edge AI nodes, security networks, and high-burst data processing infrastructure.
  • 64.22V main output at 55A supports PoE power distribution, switching boards, communication modules, and high-power network device loads.
  • 12V standby output at 3A supports management logic, standby circuits, monitoring boards, and auxiliary system electronics.
  • Platinum-level efficiency helps reduce energy loss and heat buildup during continuous network operation.
  • Active PFC helps improve input power quality and supports stable operation across different AC power conditions.
  • Wide AC/DC input compatibility allows deployment across enterprise networks, telecom rooms, edge sites, data centers, and global infrastructure environments.
  • PMBus 1.2 communication provides visibility into power status, telemetry, voltage behavior, fault information, and operating data in supported systems.
  • Smart fan control and optional reverse airflow support help match different chassis cooling paths in compact networking and telecom platforms.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, redundancy requirements, and system load before integration.

Installation / Operation Item Guidance
Load Planning Review PoE port budget, switching board demand, telecom module load, edge AI hardware, fan consumption, and standby requirements before deployment
Chassis Fitment Confirm the 185 × 73.5 × 40 mm CRPS size before mechanical integration
Input Connection Use within the supported 90–264Vac or 180–300Vdc input range
Output Compatibility Verify that the target platform is designed for 64.22V main power input
Standby Power Check Confirm that the platform standby requirement matches the 3A 12V standby output
Thermal Margin Leave sufficient airflow clearance for 3500W operation in dense network or telecom chassis
Airflow Direction Match standard or reverse airflow with the chassis cooling path
Monitoring Setup Use PMBus 1.2 where supported for telemetry, diagnostics, fault alerts, and remote maintenance visibility

FAQ

Frequently asked questions about G1395-3500WNA.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the G1395-3500WNA?

The G1395-3500WNA is a 3500W CRPS power supply designed for PoE switches, networking systems, telecom infrastructure, AI edge systems, and high-burst data processing environments.

What is the size of this model?

This model uses a compact 1U CRPS form factor with a size of 185 × 73.5 × 40 mm, making it suitable for dense networking chassis, telecom racks, and space-constrained system layouts.

What input voltage range does it support?

The G1395-3500WNA supports 90–264Vac AC input and 180–300Vdc DC input for flexible deployment across different infrastructure power environments.

Does the G1395-3500WNA support PMBus monitoring?

Yes. The unit supports PMBus 1.2, allowing compatible systems to monitor power status, telemetry, voltage behavior, fault information, and operating conditions.

Why does this model use a 64.22V main output?

The 64.22V main output is suitable for high-power PoE-oriented platforms and telecom systems that require higher-voltage power distribution for larger device loads.

How does this PSU support large PoE switch systems?

Its 3500W capacity and 64.22V output at 55A can support larger PoE power budgets, switching boards, control logic, and auxiliary network hardware in dense PoE platforms.

What makes this model different from the G1395-3000WNA?

Compared with the G1395-3000WNA, this 3500W model provides higher total output capacity and a 64.22V main rail, making it better suited for larger PoE systems, high-burst network loads, and heavier telecom applications.

What should be checked before integrating this PSU?

Confirm the 64.22V main input requirement, 12V standby demand, connector compatibility, chassis clearance, airflow direction, reverse airflow requirement, thermal margin, and PMBus support before deployment.

KEEP EXPLORING

Related products

View category →