Get a quote
PRODUCT VIEW G1511-0350WNA product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

G1511-0350WNA

G1511

INQUIRY READY

G1511-0350WNA

Gospower / AC/DC Platinum / G1511

G1511-0350WNA matches Compact Networking Systems, Edge Platforms, and Embedded Compute Nodes with 350W capacity, helping operators achieve controlled delivery for equipment expected to run for long periods.

Output Power (W):
350
Length (mm):
185
Width (mm):
73.5
Height (mm):
40
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The G1511-0350WNA is suitable for compact systems that need more power capacity than entry-level embedded supplies while still keeping a small CRPS footprint. Its 350W output makes it a practical fit for edge networking, embedded compute, access-layer communication devices, compact security platforms, and intelligent infrastructure where stable 12V delivery and efficient thermal behavior are important. Before integration, confirm the connector mapping, chassis clearance, and supported input conditions against the target power shelf. For long-term service, document fan inspection, connector seating, event-log review, and replacement procedures as part of the maintenance plan. Commissioning should verify grounding, input protection, output stability, and the response of any redundant or hot-swap control logic.

Before integrating the G1511-0350WNA, confirm the mating connector or backplane, input source, output-rail requirements, hot-swap sequence, airflow direction, monitoring interface, redundancy behavior, and service clearance against the target platform.

CORE ADVANTAGES

350W CRPS Power Supply for Compact Networking Systems, Edge Platforms, and Embedded Compute Nodes

350W Power for Compact Network Infrastructure The G1511-0350WNA is designed for compact networking systems, edge computing platforms, embedded compute nodes, and communication hardware that require stable 350W power delivery in a space-efficient CRPS module.

01

350W Power for Compact Network Infrastructure The G1511-0350WNA is designed for compact networking systems, edge computing platforms, embedded compute nodes, and communication hardware that require stable 350W power delivery in a space-efficient CRPS module.

02

CRPS 1U Format for Dense Chassis Integration With a 185 × 73.5 × 40 mm mechanical size, this model supports slim 1U systems, modular chassis designs, and edge-focused equipment where internal space and airflow layout are limited.

03

Wide AC and DC Input Compatibility It supports 90–264Vac AC input and 180–300Vdc DC input, allowing flexible deployment across enterprise networks, telecom sites, edge cabinets, and global infrastructure environments.

04

Stable 12V Output for Control and Communication Loads The unit provides a 12V main output at 29.1A and a 12V standby output at 2.1A, supporting processors, control boards, network interfaces, storage modules, fans, and management circuits.

05

Digital Regulation with PMBus Monitoring With digital regulation and PMBus 1.2 support, the G1511-0350WNA enables compatible systems to monitor operating status, power conditions, telemetry, and fault information.

06

Built for Efficient Edge-Focused Operation High operating efficiency, active PFC, adaptive fan management, and optional reverse-airflow support help this model maintain stable output, controlled cooling, and flexible installation in compact or distributed systems.

MODEL SELECTION

Compare Gospower power options.

Review nearby Gospower models and select the power level, output architecture, efficiency grade, and form factor that best match the target system.

Model Power Output Current Efficiency Form Factor Recommended Use
G1511-0350WNA 350w 12V Platinum CRPS Access gateways and embedded security nodes
G1511-0550WNA 550w 12V Platinum CRPS Branch servers and lightweight compute clusters

DEPLOYMENT SCENARIOS

Where G1511-0350WNA fits best.

The G1511-0350WNA is suitable for compact systems that need more power capacity than entry-level embedded supplies while still keeping a small CRPS footprint. Its 350W output makes it a practical fit for edge networking, embedded compute, access-layer communication devices, compact security platforms, and intelligent infrastructure where stable 12V delivery and efficient thermal behavior are important.

Scenario System Requirement Why G1511-0350WNA Fits
Compact Networking Systems Stable power for routing, switching, firewall, and gateway hardware 350W output supports communication equipment with practical operating headroom
Edge Compute Platforms Compact power for local processing and distributed data handling CRPS 1U structure fits edge systems with limited chassis space
Embedded Compute Nodes Reliable output for processors, control boards, SSDs, and I/O modules Stable 12V delivery supports embedded system operation under mixed loads
Telecom Access Equipment Long-hour power support for remote communication and access-layer devices Wide input range helps adapt to varied infrastructure power environments
Security Appliances Continuous operation for inspection, VPN, and traffic management hardware Regulated output supports always-on security and network service workloads
Industrial Network Controllers Stable power for control logic, network interfaces, and monitoring boards Efficient operation and PMBus visibility support managed infrastructure use

POWER DESIGN

Reliability notes for continuous operation.

The G1511-0350WNA is built for compact infrastructure platforms where power stability, serviceability, and efficient cooling matter more than oversized wattage. Its 350W output and 29.1A 12V main rail provide balanced power support for networking, edge, embedded, and control-oriented systems.

  • 350W output capacity supports compact networking systems, embedded compute nodes, edge platforms, security appliances, and telecom access equipment.
  • 12V main output at 29.1A provides reliable power for processors, control modules, network interfaces, storage devices, fans, and system boards.
  • 12V standby output at 2.1A supports standby operation, management logic, and auxiliary platform functions.
  • Active PFC helps improve input power quality and supports efficient conversion across different AC operating conditions.
  • Wide AC/DC input compatibility allows deployment in enterprise racks, telecom cabinets, distributed edge sites, and global infrastructure environments.
  • PMBus 1.2 communication provides visibility into voltage, current, operating status, telemetry, and fault information in supported systems.
  • Adaptive fan management helps balance cooling performance and acoustic behavior under changing load and temperature conditions.
  • Optional reverse-airflow support allows better matching with front-to-back or back-to-front chassis cooling layouts.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, redundancy requirements, and system load before integration.

Installation / Operation Item Guidance
Load Planning Review total demand from processors, network cards, control boards, storage devices, fans, and management circuits before deployment
Chassis Fitment Confirm the 185 × 73.5 × 40 mm CRPS size before mechanical integration
Input Connection Use within the supported 90–264Vac or 180–300Vdc input range
Standby Power Check Verify that the target platform standby requirement matches the 2.1A 12V standby output
Network Load Margin Leave practical headroom for traffic peaks, I/O activity, fan speed changes, and management functions
Airflow Direction Match standard or reverse airflow with the chassis cooling layout
Monitoring Setup Use PMBus 1.2 where supported for telemetry, fault alerts, and maintenance visibility
Service Inspection Inspect fan condition, connector seating, dust buildup, and airflow path during regular service intervals

FAQ

Frequently asked questions about G1511-0350WNA.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the G1511-0350WNA?

The G1511-0350WNA is a 350W CRPS power supply designed for compact networking systems, edge platforms, embedded compute nodes, and communication hardware.

What is the size of this model?

This model uses a CRPS 1U form factor with a size of 185 × 73.5 × 40 mm, making it suitable for compact and modular chassis integration.

What input voltage range does it support?

The G1511-0350WNA supports 90–264Vac AC input and 180–300Vdc DC input for deployment across different infrastructure power environments.

What output does the G1511-0350WNA provide?

It provides a 12V main output at 29.1A and a 12V standby output at 2.1A for system operation, standby functions, and management logic.

Is this model suitable for compact networking equipment?

Yes. Its 350W output, compact CRPS structure, and stable 12V delivery make it suitable for gateways, routers, firewalls, access devices, and edge network systems.

Does the G1511-0350WNA support PMBus monitoring?

Yes. The unit supports PMBus 1.2, allowing compatible platforms to monitor operating status, telemetry, power conditions, and fault information.

Can this model support reverse airflow?

Yes. Optional reverse-airflow support is available for chassis designs that require a different PSU cooling direction.

What infrastructure is this model best suited for?

The G1511-0350WNA is best suited for compact networking infrastructure, edge compute platforms, embedded systems, telecom access equipment, and space-limited IT deployments.

KEEP EXPLORING

Related products

View category →