Get a quote
PRODUCT VIEW GW-GSP350W-36 product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

GW-GSP350W-36

GSP series

INQUIRY READY

GW-GSP350W-36

Greatwall / Industrial Power Supply / GSP series

GW-GSP350W-36 targets Forced Air, Telecom Equipment, Industrial Control, Led Display, and Test Systems and uses 349W capacity and built-in dc fan to maintain practical deployment in systems that cannot tolerate unstable power.

Model
GW-GSP350W-36
Product Type
Enclosed AC-DC Power Supply
Rated Output Power
349W
AC Input Voltage
90–264Vac
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The GW-GSP350W-36 is designed for equipment requiring substantial power from a regulated 36V rail. Its active PFC, half-bridge LLC conversion, built-in fan, compact enclosure, and standoff output connection support integration into mobile automation, motion control, battery testing, and material-handling applications. For this 349W capacity, for long-term service, document fan inspection, connector seating, event-log review, and replacement procedures as part of the maintenance plan.

Plan the GW-GSP350W-36 output wiring around the actual current demand: keep conductors short, use low-resistance terminations, separate power paths from sensitive signal wiring, and preserve access for retightening and inspection. Arrange the enclosure so heat from neighboring components cannot collect around the supply or its connection points.

Qualify the GW-GSP350W-36 at several load levels, measuring voltage at both the supply terminals and the equipment input rather than relying only on no-load readings. Record cable drop, connector temperature, and enclosure temperature as baseline values. Later maintenance checks can compare against this record to identify loose joints, rising contact resistance, or deteriorating heat dissipation before they interrupt service.

CORE ADVANTAGES

349W 36V Enclosed AC-DC Power Supply for AGV Systems, Servo Drives, Battery Testing, and Automated Material Handling

The GW-GSP350W-36 delivers a regulated 36V / 9.7A output with up to 349W of output power , supporting automated guided vehicles, servo-drive systems, battery-test equipment, material-handling machinery, and other applications requiring a dependable 36V DC source.

01

349W High-Power DC Capacity

The GW-GSP350W-36 delivers a regulated 36V / 9.7A output with up to 349W of output power , supporting automated guided vehicles, servo-drive systems, battery-test equipment, material-handling machinery, and other applications requiring a dependable 36V DC source.

02

Low-Profile 215 × 115 × 30 mm Enclosed Structure

Built in a slim 215 × 115 × 30 mm metal enclosure , this model is suitable for installation inside mobile automation equipment, drive-control cabinets, test platforms, conveyor systems, and other machines where vertical mounting space is limited.

03

Universal 90–264Vac Input Compatibility

It supports a wide 90–264Vac input range , allowing operation across common international AC power grids without manual input-voltage selection.

04

Stable 36V / 9.7A Output Performance

The unit provides a regulated 36V DC output at up to 9.7A , making it suitable for AGV control systems, servo drives, compact motors, battery analyzers, actuator assemblies, and other dedicated 36V loads.

05

Active PFC and Half-Bridge LLC Conversion

Built-in active PFC with PF greater than 0.99 improves input power utilization, while the half-bridge LLC topology supports efficient conversion, stable voltage regulation, and dependable continuous operation.

06

Built-In Fan Cooling and Comprehensive Protection

An integrated DC fan provides forced-air cooling for sustained high-power operation. Low-ripple output, adjustable output voltage, an output-status LED, and short-circuit, overcurrent, overvoltage, and overtemperature protection support reliable operation from -30°C to +70°C .

MODEL SELECTION

Compare Greatwall industrial power options.

Review nearby Greatwall models and select the output voltage, power level, and integration profile that best match the target system.

Model Output Voltage Rated Current Rated Power Best-Fit Application
GW-GSP350W-4 4Vdc 60A 240W Semiconductor validation, burn-in fixtures, high-current control boards, and specialized 4V electronics
GW-GSP350W-5 5Vdc 60A 300W Embedded computing, LED processing, industrial controllers, and high-current 5V systems
GW-GSP350W-12 12Vdc 29.2A 350.4W Industrial computers, machine-vision platforms, security equipment, and 12V electronic systems
GW-GSP350W-15 15Vdc 23.3A 349.5W Test instruments, signal-processing equipment, imaging controllers, and dedicated 15V platforms
GW-GSP350W-24 24Vdc 14.6A 350.4W PLC systems, industrial automation, robotic interfaces, actuators, and process-control equipment
GW-GSP350W-27 27Vdc 13A 351W RF equipment, telemetry platforms, broadcast electronics, and specialized 27V systems
GW-GSP350W-36 36Vdc 9.7A 349W Motor-drive equipment, mobile automation, battery test systems, and dedicated 36V loads
GW-GSP350W-48 48Vdc 7.3A 350.4W Telecom infrastructure, industrial networking, remote communication, and distributed 48V systems

DEPLOYMENT SCENARIOS

Where GW-GSP350W-36 fits best.

The GW-GSP350W-36 is designed for equipment requiring substantial power from a regulated 36V rail. Its active PFC, half-bridge LLC conversion, built-in fan, compact enclosure, and standoff output connection support integration into mobile automation, motion control, battery testing, and material-handling applications.

Deployment Scenario Application Description
AGV and AMR Systems Powers onboard controllers, navigation modules, auxiliary electronics, communication devices, and compact drive-control assemblies
Servo Drive Equipment Supplies stable 36V power to servo controllers, positioning modules, motion-control interfaces, and compact drive units
Battery Test Platforms Supports battery analyzers, charge-discharge fixtures, validation racks, and energy-storage test equipment
Automated Conveyor Systems Powers conveyor controllers, drive modules, sensors, actuators, and material-handling interfaces
Mobile Robotic Equipment Suitable for inspection robots, service robots, autonomous carts, and compact mobile machinery
Custom 36V Electronics Integrates into specialized industrial, laboratory, and automation equipment designed around a regulated 36V rail

POWER DESIGN

Reliability notes for continuous operation.

The GW-GSP350W-36 combines an active-PFC input stage with a half-bridge LLC conversion architecture to produce a regulated 36V output from a universal AC source. Its 9.7A output rating supports demanding motion-control and automation loads while maintaining a compact mechanical profile.

  • The built-in DC fan provides forced-air cooling for sustained operation near the rated load. The optional dual-output overvoltage-protection configuration should be confirmed before system integration when this function is required.
  • Key reliability features include:
  • · Active PFC with PF greater than 0.99 and half-bridge LLC conversion
  • · Universal 90–264Vac input compatibility
  • · Built-in DC fan for forced-air cooling
  • · Up to 92% efficiency with low-ripple, low-noise 36V output
  • · Adjustable output voltage with LED status indication
  • · Comprehensive SCP, OCP, OVP, and OTP protection
  • · Optional dual-output overvoltage-protection configuration
  • · 100% high-temperature burn-in testing
  • · Conformal-coated PCB with operation support up to 5,000 meters
  • · Design aligned with IEC, EN, and UL 62368 safety requirements

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, and system load before integration.

Item Installation Recommendation
AC Input Confirm the live, neutral, and protective-earth terminals before applying power
Output Connection Verify the positive and negative 36V output terminals before connecting the load
Cable Selection Use short, low-resistance conductors capable of safely carrying the full 9.7A output current
Terminal Tightening Secure the standoff terminals firmly to minimize contact resistance and localized heating
Grounding Connect the protective-earth terminal to a reliable equipment ground
Fan Clearance Keep the fan intake and exhaust areas free from cables, panels, and airflow obstructions
Installation Clearance Maintain adequate spacing around the enclosure for forced-air cooling
Output Adjustment Use a calibrated multimeter and make only small adjustments while monitoring the connected load
Load Capacity Keep the continuous load within the rated 349W and 9.7A output limits
Motor Loads Confirm startup, acceleration, and stall-current requirements before connecting motors or servo drives
Inductive Loads Use suitable suppression components for motors, relays, contactors, and actuators
Maintenance Disconnect the AC input and allow stored energy to discharge before inspection or servicing

FAQ

Frequently asked questions about GW-GSP350W-36.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the GW-GSP350W-36?

The GW-GSP350W-36 is an enclosed AC-DC switching power supply with active PFC, half-bridge LLC conversion, built-in forced-air cooling, and a regulated 36V output.

What are the dimensions of the GW-GSP350W-36?

Its external dimensions are approximately 215 × 115 × 30 mm.

What input-voltage range does it support?

It supports a universal AC input range of 90–264Vac.

What are its rated output voltage, current, and power?

The unit provides 36V DC, a maximum output current of 9.7A, and a rated output power of 349W.

Is the GW-GSP350W-36 suitable for AGV and servo-drive systems?

Yes. It can support compatible AGV controllers, servo drives, motion-control modules, and compact motors, provided their continuous and startup-current requirements remain within the available output capacity.

Does the power supply use a cooling fan?

Yes. It includes a built-in DC fan for forced-air cooling during high-power operation.

Can the output voltage be adjusted?

Yes. The output voltage can be adjusted slightly for system calibration or to compensate for voltage drop in the output wiring.

What protection functions are included?

The power supply includes short-circuit, overcurrent, overvoltage, and overtemperature protection. An optional dual-output overvoltage-protection configuration is also indicated.

KEEP EXPLORING

Related products

View category →