GSP series

INQUIRY READY

GW-GSP550W-24

Greatwall / Industrial Power Supply / GSP series

GW-GSP550W-24 is a specialized choice for Forced-Air Cooling, Automation Systems, Industrial Control, Security Equipment, and Led Display Power; 550.1W capacity and built-in dc fan underpins an installation-ready choice for mission-critical equipment.

Model
GW-GSP550W-24
Product Type
Enclosed AC-DC Power Supply
Rated Output Power
550.1W
AC Input Voltage
90–264Vac

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The GW-GSP550W-24 is designed for industrial systems built around a regulated 24V DC rail. Its active PFC, half-bridge LLC conversion, built-in fan, remote sensing, and high-current output support reliable integration into automation and machinery platforms. For this 550.1W capacity, before integration, confirm the connector mapping, chassis clearance, and supported input conditions against the target power shelf. For long-term service, document fan inspection, connector seating, event-log review, and replacement procedures as part of the maintenance plan.

Plan the GW-GSP550W-24 output wiring around the actual current demand: keep conductors short, use low-resistance terminations, separate power paths from sensitive signal wiring, and preserve access for retightening and inspection. Arrange the enclosure so heat from neighboring components cannot collect around the supply or its connection points.

Qualify the GW-GSP550W-24 at several load levels, measuring voltage at both the supply terminals and the equipment input rather than relying only on no-load readings. Record cable drop, connector temperature, and enclosure temperature as baseline values. Later maintenance checks can compare against this record to identify loose joints, rising contact resistance, or deteriorating heat dissipation before they interrupt service.

CORE ADVANTAGES

550.1W 24V Enclosed AC-DC Power Supply for Industrial Automation, PLC Cabinets, Machinery, and Actuator Systems

The GW-GSP550W-24 delivers a regulated 24V / 22.92A output with up to 550.1W of output power , supporting PLC cabinets, industrial machinery, automated production equipment, actuator systems, and other platforms requiring a stable high-current 24V DC source.

01

550.1W High-Current 24V Power Capacity

The GW-GSP550W-24 delivers a regulated 24V / 22.92A output with up to 550.1W of output power , supporting PLC cabinets, industrial machinery, automated production equipment, actuator systems, and other platforms requiring a stable high-current 24V DC source.

02

Compact 230 × 127 × 40.5 mm Enclosed Structure

Built in a durable 230 × 127 × 40.5 mm metal enclosure , this model is suitable for installation inside control cabinets, machine enclosures, automation panels, production equipment, and integrated industrial systems.

03

Universal 90–264Vac Input Compatibility

The power supply supports a wide 90–264Vac input range , allowing operation across common international AC power grids without manual input-voltage selection.

04

Stable 24V / 22.92A Output Performance

The unit provides a regulated 24V DC output at up to 22.92A , making it suitable for PLC modules, industrial controllers, sensors, relays, solenoid valves, actuators, communication modules, and other demanding 24V loads.

05

Active PFC and Half-Bridge LLC Conversion

Built-in active PFC with PF greater than 0.97 improves input power utilization, while the half-bridge LLC topology supports efficient conversion, stable voltage regulation, and dependable continuous operation.

06

Forced-Air Cooling with Remote Control Functions

An integrated DC fan provides forced-air cooling for sustained high-load operation. Remote ON/OFF, remote sensing, adjustable output voltage, low-ripple output, and short-circuit, overcurrent, overvoltage, and overtemperature protection support reliable operation from -30°C to +70°C .

MODEL SELECTION

Compare Greatwall industrial power options.

Review nearby Greatwall models and select the output voltage, power level, and integration profile that best match the target system.

Model Output Voltage Rated Current Rated Power Best-Fit Application
GW-GSP550W-5 5Vdc 70A 350W Semiconductor testing, embedded computing, LED processing, processor boards, and high-current 5V systems
GW-GSP550W-12 12Vdc 45.84A 550W Industrial computers, surveillance equipment, robotic controllers, and high-power 12V platforms
GW-GSP550W-15 15Vdc 36.66A 550W Laboratory instruments, imaging systems, automated test equipment, and dedicated 15V electronics
GW-GSP550W-24 24Vdc 22.92A 550W PLC cabinets, industrial automation, process control, actuators, and machinery interfaces
GW-GSP550W-27 27Vdc 20.37A 550W RF equipment, broadcast systems, microwave communication, and specialized 27V platforms
GW-GSP550W-48 48Vdc 11.46A 550W Telecom equipment, industrial networking, edge communication, and distributed 48V systems

DEPLOYMENT SCENARIOS

Where GW-GSP550W-24 fits best.

The GW-GSP550W-24 is designed for industrial systems built around a regulated 24V DC rail. Its active PFC, half-bridge LLC conversion, built-in fan, remote sensing, and high-current output support reliable integration into automation and machinery platforms.

Deployment Scenario Application Description
PLC Control Cabinets Powers PLC modules, I/O systems, relays, communication interfaces, and cabinet accessories
Industrial Machinery Supplies controllers, sensors, valves, actuators, and auxiliary electronics inside production equipment
Automated Production Lines Supports conveyor controls, inspection stations, assembly systems, and distributed automation devices
Motor and Actuator Systems Provides regulated 24V power for solenoids, linear actuators, brakes, and motion-control accessories
Process Control Equipment Powers transmitters, control modules, monitoring devices, and industrial communication components
Custom 24V Platforms Integrates into industrial, laboratory, transportation, and embedded systems designed around a 24V rail

POWER DESIGN

Reliability notes for continuous operation.

The GW-GSP550W-24 combines an active-PFC input stage with a half-bridge LLC conversion architecture to produce a regulated 24V output from a universal AC source. Because the output current can reach 22.92A, conductor resistance, terminal quality, connector selection, PCB copper capacity, and load-side voltage drop should be considered carefully during integration.

  • The remote-sensing function can compensate for voltage loss between the power supply and the connected equipment. Sense wires should be routed separately from high-current cables and electrically noisy wiring.
  • Key reliability features include:
  • · Active PFC with PF greater than 0.97 and half-bridge LLC conversion
  • · Universal 90–264Vac input compatibility
  • · Up to 92% conversion efficiency
  • · Built-in DC fan for forced-air cooling
  • · Remote ON/OFF control with remote voltage sensing
  • · Low-ripple and low-noise regulated 24V output
  • · Adjustable output voltage with LED status indication
  • · Comprehensive SCP, OCP, OVP, and OTP protection
  • · 100% high-temperature burn-in, conformal-coated PCB, and operation support up to 5,000 meters

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, and system load before integration.

Item Installation Recommendation
AC Input Confirm the live, neutral, and protective-earth terminals before applying power
Output Polarity Verify the positive and negative 24V terminals before connecting the load
Cable Selection Use short, low-resistance conductors capable of carrying the full 22.92A output
Terminal Tightening Secure all output terminals firmly to reduce contact resistance and localized heating
Voltage Drop Measure voltage directly at the load under normal operating current
Remote Sensing Connect the sense lines correctly and keep them away from high-noise wiring
Grounding Connect the protective-earth terminal to a reliable equipment ground
Fan Clearance Keep the fan intake and exhaust areas free from cables, panels, and obstructions
Installation Clearance Maintain adequate spacing around the enclosure for forced-air cooling
Output Adjustment Use a calibrated multimeter and make only small adjustments while monitoring the load
Load Capacity Keep the continuous load within the rated 550.1W and 22.92A output limits
Maintenance Disconnect the AC input and allow stored energy to discharge before inspection or servicing

FAQ

Frequently asked questions about GW-GSP550W-24.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the GW-GSP550W-24?

The GW-GSP550W-24 is an enclosed AC-DC switching power supply with active PFC, half-bridge LLC conversion, built-in forced-air cooling, remote-control functions, and a regulated high-current 24V output.

What are the dimensions of the GW-GSP550W-24?

Its external dimensions are approximately 230 × 127 × 40.5 mm.

What input-voltage range does it support?

It supports a universal AC input range of 90–264Vac.

What are its rated output voltage, current, and power?

The unit provides 24V DC, a maximum output current of 22.92A, and a rated output power of 550.1W.

Does the GW-GSP550W-24 support remote sensing?

Yes. Remote sensing helps compensate for voltage drop between the power supply and the connected load, which is useful in high-current 24V systems.

Does the power supply include remote ON/OFF control?

Yes. The remote ON/OFF function allows the output to be enabled or disabled through an external control signal.

Does the GW-GSP550W-24 require forced-air cooling?

Yes. It includes a built-in DC fan and requires unobstructed airflow for reliable operation under high load.

What protection functions are included?

The power supply includes short-circuit, overcurrent, overvoltage, and overtemperature protection.