Get a quote
PRODUCT VIEW GW-NHP500SW-36 product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

GW-NHP500SW-36

NHP series

INQUIRY READY

GW-NHP500SW-36

Greatwall / Industrial Power Supply / NHP series

GW-NHP500SW-36 matches Free-Air Cooling, High Reliability, Agv System, Mobile Robot, Conveyor Control, and Industrial Actuator with 500.4W capacity and a stable 36Vdc rail, helping operators achieve steady operation across always-on infrastructure.

Power Supply Type
AC/DC enclosed switching power supply
Rated Output Voltage
36Vdc
Rated Output Current
13.9A
Rated Output Power
500.4W
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The GW-NHP500SW-36 is designed for equipment requiring a stable 36V rail with substantial current capacity. Its compact enclosure, wide input range, high efficiency, fanless cooling, and optional monitoring functions make it suitable for mobile automation and industrial motion systems. For this 500.4W capacity, 36Vdc output, system validation should cover standby behavior, load transitions, protection recovery, and monitoring compatibility under expected operating conditions. Allow practical headroom for startup demand and transient loads, while keeping intake and exhaust paths clear throughout continuous operation.

Plan the GW-NHP500SW-36 output wiring around the actual current demand: keep conductors short, use low-resistance terminations, separate power paths from sensitive signal wiring, and preserve access for retightening and inspection. Arrange the enclosure so heat from neighboring components cannot collect around the supply or its connection points.

Qualify the GW-NHP500SW-36 at several load levels, measuring voltage at both the supply terminals and the equipment input rather than relying only on no-load readings. Record cable drop, connector temperature, and enclosure temperature as baseline values. Later maintenance checks can compare against this record to identify loose joints, rising contact resistance, or deteriorating heat dissipation before they interrupt service.

CORE ADVANTAGES

500.4W 36V 13.9A Slim AC/DC Power Supply for AGV Systems, Industrial Actuators, Conveyor Equipment, and Motion Control Platforms

The GW-NHP500SW-36 delivers a regulated 36V output at up to 13.9A, providing 500.4W of rated output power. It is designed for automated guided vehicles, mobile robotic platforms, conveyor equipment, industrial actuators, motor-control systems, and other applications requiring a stable 36V DC rail.

01

High-Power 36V DC Output

The GW-NHP500SW-36 delivers a regulated 36V output at up to 13.9A, providing 500.4W of rated output power. It is designed for automated guided vehicles, mobile robotic platforms, conveyor equipment, industrial actuators, motor-control systems, and other applications requiring a stable 36V DC rail.

02

Slim 31 mm Enclosed Construction

With dimensions of 232 × 80 × 31 mm, the power supply combines more than 500W of output capability with a relatively slim mechanical profile. Its elongated metal enclosure supports installation in compact machine compartments, robotic equipment, control cabinets, and space-constrained industrial systems.

03

Universal AC and High-Voltage DC Input

The unit supports 90–264Vac input and 127–370Vdc input, allowing operation across different regional AC grids and selected high-voltage DC distribution environments. Built-in active PFC improves input current characteristics and supports stable front-end power conversion.

04

High Efficiency up to 95.5%

Conversion efficiency of up to 95.5% helps reduce internal heat generation and system energy losses. This supports efficient continuous operation in mobile robots, automated material-handling equipment, motion-control platforms, and industrial machinery.

05

Fanless Semi-Potted Design

The GW-NHP500SW-36 uses free-air convection cooling without an integrated fan. Its semi-potted internal construction improves resistance to vibration, humidity, dust, and environmental stress while reducing acoustic noise, moving-part wear, and routine maintenance requirements.

06

Integrated Protection and Optional System Functions

The power supply includes output short-circuit, overcurrent, overvoltage, and overtemperature protection. It also provides an output LED indicator and adjustable output voltage, while optional DC OK signaling and redundant operation can support status monitoring and higher-availability equipment designs.

MODEL SELECTION

Compare Greatwall industrial power options.

Review nearby Greatwall models and select the output voltage, power level, and integration profile that best match the target system.

Model Best-Fit Application
GW-NHP500SW-4.2 Battery formation equipment, cell-testing platforms, laboratory systems, and high-current 4.2V loads
GW-NHP500SW-5 Embedded computing, storage backplanes, LED display electronics, and high-current 5V systems
GW-NHP500SW-12 Edge computers, network appliances, security equipment, and high-power 12V electronics
GW-NHP500SW-15 Automated test systems, machine-vision equipment, broadcast electronics, and specialized 15V loads
GW-NHP500SW-24 PLC systems, robotics, machine vision, control cabinets, and standard 24V industrial loads
GW-NHP500SW-36 AGVs, mobile robots, conveyor systems, industrial actuators, and high-power 36V motion-control equipment
GW-NHP500SW-48 Telecom infrastructure, PoE systems, network equipment, and distributed 48V platforms
GW-NHP500SW-55 High-power PoE equipment, telecom radio systems, edge communications, and specialized 55V loads

DEPLOYMENT SCENARIOS

Where GW-NHP500SW-36 fits best.

The GW-NHP500SW-36 is designed for equipment requiring a stable 36V rail with substantial current capacity. Its compact enclosure, wide input range, high efficiency, fanless cooling, and optional monitoring functions make it suitable for mobile automation and industrial motion systems.

Deployment Scenario Application Value
AGV and AMR Platforms Supplies 36V power to onboard controllers, navigation electronics, communication modules, sensors, and auxiliary systems
Industrial Actuator Systems Supports electric actuators, positioning mechanisms, valve controllers, and automated mechanical assemblies
Conveyor and Material-Handling Equipment Powers conveyor controllers, drive interfaces, sorting systems, and warehouse-automation equipment
Motion-Control Platforms Provides regulated power for motor drivers, positioning controllers, linear-motion systems, and robotic subsystems

POWER DESIGN

Reliability notes for continuous operation.

The GW-NHP500SW-36 combines a 500.4W 36V output with active PFC, high conversion efficiency, natural convection cooling, and semi-potted construction. It is optimized for compact industrial systems requiring reliable continuous operation without an integrated cooling fan.

  • Supports 90–264Vac universal input and 127–370Vdc input.
  • Delivers 36V at up to 13.9A with 500.4W rated output power.
  • Built-in active PFC improves input current quality.
  • Provides efficiency of up to 95.5%.
  • Uses fanless free-air convection cooling.
  • Semi-potted construction improves resistance to environmental stress.
  • Includes short-circuit, overcurrent, overvoltage, and overtemperature protection.
  • Supports installations up to 5,000 meters, with optional DC OK and redundant functions available.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, and system load before integration.

Item Guidance
Mounting Orientation Secure the unit firmly using the designated chassis mounting points
Ventilation Clearance Maintain sufficient open space around the perforated enclosure for natural airflow
Input Wiring Confirm whether the installation uses AC or high-voltage DC input before connection
Output Cable Sizing Use short, low-resistance conductors rated to safely carry up to 13.9A
Terminal Connection Tighten all screw terminals securely to minimize resistance and localized heating
Grounding Connect protective earth correctly before applying input power
Output Adjustment Verify the adjusted voltage with a calibrated meter before connecting sensitive equipment
Motor and Actuator Loads Confirm startup current, transient demand, regenerative energy, and braking requirements
Load Distribution Use suitable distribution terminals or busbars when powering several subsystems
Temperature Management Apply appropriate load derating or additional enclosure airflow near the upper temperature limit

FAQ

Frequently asked questions about GW-NHP500SW-36.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the GW-NHP500SW-36?

It is a slim enclosed AC/DC switching power supply with a regulated 36V output, built-in active PFC, screw-terminal connections, and fanless convection cooling.

What are the dimensions of the GW-NHP500SW-36?

The unit measures 232 × 80 × 31 mm, making it suitable for compact machine compartments and space-constrained industrial systems.

What input voltage range does it support?

It supports 90–264Vac input and 127–370Vdc input.

What output power and current does it provide?

It delivers 36V at up to 13.9A, providing 500.4W of rated output power.

Is it suitable for AGV and AMR systems?

Yes. Its regulated 36V output can support compatible onboard controllers, communication modules, sensors, navigation electronics, and auxiliary equipment.

Can it power industrial actuators and motor drivers?

Yes. It can supply compatible actuator controllers and motor-drive systems, provided startup current, transient demand, regenerative energy, and protection requirements are verified.

Does the power supply require an integrated cooling fan?

No. It uses free-air convection cooling, so adequate ventilation clearance must be maintained around the enclosure.

What protection and monitoring functions are available?

The unit includes short-circuit, overcurrent, overvoltage, and overtemperature protection. Optional DC OK signaling and redundant operating functions are also available.

KEEP EXPLORING

Related products

View category →