Get a quote
PRODUCT VIEW GW-PA600I-FS product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

GW-PA600I-FS

Hot Swap

INQUIRY READY

GW-PA600I-FS

Greatwall / Server Power Supply / Hot Swap

GW-PA600I-FS is a specialized choice for Hot Swap Design, Rack-Mount Server Systems, Network Switching Equipment, Storage & Backup Systems, Industrial Control Platforms, and Backupsystem Components; 600W capacity and a stable 12V / 50A rail underpins reliable power behavior under changing system loads.

Model
GW-PA600I-FS
Series
Hot Swap
Input Voltage
90-290Vac / 192-288Vdc
Output Voltage
12V / 50A; 5V / 2A
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The GW-PA600I-FS is designed for systems that require stronger 12V power capacity together with auxiliary 5V support. It is suitable for mid-power server hardware, storage systems, network infrastructure devices, industrial cabinets, embedded computing equipment, and serviceable infrastructure platforms where 600W output, hot swap integration, and flexible AC / DC input compatibility are important.

Plan the GW-PA600I-FS output wiring around the actual current demand: keep conductors short, use low-resistance terminations, separate power paths from sensitive signal wiring, and preserve access for retightening and inspection. Arrange the enclosure so heat from neighboring components cannot collect around the supply or its connection points.

Qualify the GW-PA600I-FS at several load levels, measuring voltage at both the supply terminals and the equipment input rather than relying only on no-load readings. Record cable drop, connector temperature, and enclosure temperature as baseline values. Later maintenance checks can compare against this record to identify loose joints, rising contact resistance, or deteriorating heat dissipation before they interrupt service.

CORE ADVANTAGES

600W Hot Swap 12V / 5V Power Supply for Mid-Power Servers, Storage Devices, and Cabinet Infrastructure Platforms

The GW-PA600I-FS delivers 600W output for mid-power server systems, storage equipment, embedded computing platforms, network infrastructure, industrial control cabinets, and other equipment that requires stable 12V main power with additional 5V auxiliary output. Compared with lower-power models in the Hot Swap series, this model provides stronger output capacity for systems with more boards, drives, fans, and connected modules.

01

600W Mid-Power Hot Swap Output

The GW-PA600I-FS delivers 600W output for mid-power server systems, storage equipment, embedded computing platforms, network infrastructure, industrial control cabinets, and other equipment that requires stable 12V main power with additional 5V auxiliary output. Compared with lower-power models in the Hot Swap series, this model provides stronger output capacity for systems with more boards, drives, fans, and connected modules.

02

Wide AC / DC Input Compatibility

This model supports 90-290Vac / 192-288Vdc input, making it suitable for equipment deployed in different AC or DC power environments. The wide input range helps improve power adaptability for cabinet-mounted systems, industrial equipment, and infrastructure platforms that may require flexible input support.

03

12V Main Output with 5V Auxiliary Output

The GW-PA600I-FS provides 12V / 50A main output together with 5V / 2A auxiliary output. This output structure is useful for systems that require high-current 12V power for main components while also needing 5V support for control circuits, logic modules, peripheral interfaces, or auxiliary system functions.

04

Hot Swap Structure for Serviceable Systems

As part of the Hot Swap series, the GW-PA600I-FS is suitable for platforms where power module replacement, service access, and maintenance convenience are important. In compatible chassis or cabinet systems, the hot swap structure helps simplify replacement and reduce maintenance interruption.

05

Practical 600W Capacity for Mid-Range Infrastructure

The 600W power rating makes this model suitable for mid-range equipment that requires more capacity than 180W or 300W models, but does not need high-capacity 1000W, 1600W, or 2700W power architecture. It is a strong fit for compact server platforms, storage appliances, network devices, and industrial infrastructure systems with moderate-to-higher power demand.

06

Safety Support for Commercial and Industrial Deployment

The GW-PA600I-FS supports CCC, CB, and CE, making it suitable for commercial equipment, infrastructure systems, and industrial platforms that require common safety compliance support.

MODEL SELECTION

Compare Greatwall power options.

Review nearby Greatwall models and select the power level, output architecture, and form factor that best match the target system.

Model Power Input Voltage Output Voltage Safety Best-Fit Application
GW-PA70IB 70W 90-290Vac / 192-288Vdc 12V CCC, CB, CE Low-power control boards, compact embedded modules, and small 12V auxiliary infrastructure devices
GW-PA150IB-F 150W 90-290Vac / 192-288Vdc 12V CCC, CB, CE Lightweight 12V platforms, compact industrial equipment, and small serviceable control systems
GW-PA180I-F 180W 90-290Vac / 192-290Vdc 12V CCC, CB, CE Compact server systems, embedded 12V platforms, industrial control devices, and hot swap low-power infrastructure
GW-PA300I-F 300W 90-290Vac / 192-290Vdc 12V CCC, CE Mid-power 12V control platforms, compact server nodes, network control devices, and embedded computing systems
GW-PA600I-FS 600W 90-290Vac / 192-288Vdc 12V / 50A; 5V / 2A CCC, CB, CE Mid-power server platforms, storage appliances, network devices, and cabinet systems requiring 12V main output with 5V auxiliary support
GW-PA600I-P-F 600W 90-290Vac / 190-290Vdc 56V CCC, CB, CE 56V power architecture platforms, communication equipment, and specialized high-voltage distribution systems
GW-PA1000I-P-F 1000W 90-290Vac / 192-288Vdc 56V CCC, CB, CE Higher-capacity 56V infrastructure, telecom-style equipment, and distributed power systems
GW-PA1600I 1600W 90-290Vac / 192-288Vdc 12V / 133.4A; 5Vsb / 2A CCC High-current 12V server platforms, storage systems, and larger computing infrastructure requiring standby output
GW-PA2700I 2700W 90-290Vac / 192-288Vdc 54V CCC, CB, CE, UL High-power 54V platforms, AI infrastructure, telecom systems, and dense power distribution environments
GW-PAH3000I-F 3000W 90-290Vac / 188-400Vdc 53.5V CQC, CB, CE High-capacity 53.5V infrastructure, demanding cabinet systems, and heavy-load power platforms

DEPLOYMENT SCENARIOS

Where GW-PA600I-FS fits best.

The GW-PA600I-FS is designed for systems that require stronger 12V power capacity together with auxiliary 5V support. It is suitable for mid-power server hardware, storage systems, network infrastructure devices, industrial cabinets, embedded computing equipment, and serviceable infrastructure platforms where 600W output, hot swap integration, and flexible AC / DC input compatibility are important.

Scenario System Requirement Why GW-PA600I-FS Fits
Mid-Power Server Platforms Stable 12V output for server boards, fans, control modules, and internal power distribution 12V / 50A main output provides practical current capacity for mid-range server systems
Storage Appliances Power support for controllers, drive backplanes, fans, and auxiliary circuits 600W capacity and 5V / 2A auxiliary output help support storage-related system components
Network Infrastructure Devices Reliable power for switches, routing equipment, access systems, and communication control modules Wide 90-290Vac / 192-288Vdc input supports flexible deployment in different infrastructure environments
Industrial Control Cabinets Power support for monitoring units, control boards, I/O devices, and cabinet-mounted electronics Hot swap design improves service convenience for equipment requiring easier maintenance access
Embedded Computing Systems 12V main output with auxiliary 5V support for integrated computing platforms and peripheral modules Dual-output structure fits systems that need both main power and auxiliary low-voltage support
Edge Infrastructure Nodes Compact serviceable power module for distributed computing, access, or control equipment 600W output provides more headroom than lower-power models while keeping a service-friendly hot swap structure

POWER DESIGN

Reliability notes for continuous operation.

The GW-PA600I-FS is built for mid-power infrastructure systems that require stable 12V main output and additional 5V auxiliary output from a wide AC or DC input source. Compared with 180W or 300W models, it provides significantly more power capacity, making it suitable for systems with heavier board-level load, multiple connected modules, higher fan demand, storage components, or more complex internal power distribution.

  • 600W output capacity supports mid-power server platforms, storage appliances, network devices, embedded computing equipment, and industrial cabinet systems.
  • 90-290Vac / 192-288Vdc input provides flexible compatibility for AC and DC power distribution environments.
  • 12V / 50A main output supports boards, processors, fans, controllers, storage interfaces, and system-level power rails.
  • 5V / 2A auxiliary output helps support control circuits, logic modules, peripheral interfaces, and auxiliary equipment functions.
  • Hot swap structure helps simplify module replacement and improves service convenience in compatible systems.
  • CCC, CB, and CE safety support makes the model suitable for commercial, infrastructure, and industrial deployment projects.
  • Mid-power positioning makes this model suitable when lower-power 12V models do not provide enough headroom, while larger high-power models may be unnecessary.
  • Practical system integration helps support equipment designs that require stable output, manageable thermal behavior, auxiliary power support, and convenient maintenance access.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, and system load before integration.

Installation / Operation Item Guidance
Input Voltage Matching Confirm that the target system supports 90-290Vac / 192-288Vdc input before installation
Output Requirement Verify that the equipment requires 12V / 50A main output and 5V / 2A auxiliary output
Load Planning Keep long-term load within a suitable range to support stable output, efficiency, and service life
Chassis Compatibility Make sure the equipment supports the correct hot swap power module structure and installation method
Connector Matching Confirm connector position, electrical interface, output rail matching, and system-level compatibility before integration
Auxiliary Rail Check Ensure the system properly uses the 5V auxiliary output and does not exceed the rated 5V / 2A capacity
Thermal Clearance Keep intake and exhaust areas clear to avoid heat buildup around the PSU bay
Module Installation Ensure the power supply is fully seated and correctly connected before powering on the system
Routine Maintenance Check dust buildup, connector condition, fan behavior, output stability, and system thermal status during regular service

FAQ

Frequently asked questions about GW-PA600I-FS.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the GW-PA600I-FS?

The GW-PA600I-FS is a 600W Hot Swap power supply designed for mid-power systems that require 12V main output and 5V auxiliary output, including server platforms, storage equipment, network infrastructure, and industrial control systems.

What input voltage range does this model support?

It supports 90-290Vac / 192-288Vdc input, making it suitable for systems that may operate in different AC or DC power environments.

What output does the GW-PA600I-FS provide?

The model provides 12V / 50A main output and 5V / 2A auxiliary output. This makes it suitable for systems that need both main 12V power and additional 5V support.

What is the main advantage of the GW-PA600I-FS?

Its main advantage is the combination of 600W output capacity, 12V / 50A main power, 5V / 2A auxiliary output, and hot swap service convenience for mid-power infrastructure systems.

Is this model suitable for storage systems?

Yes. The 600W capacity, 12V main output, and 5V auxiliary output make it suitable for storage appliances, drive-related platforms, controller systems, and cabinet-mounted storage equipment.

Can this model be used in industrial control cabinets?

Yes. Its wide input range, hot swap structure, and dual-output design make it suitable for industrial control cabinets, monitoring equipment, embedded platforms, and infrastructure control systems.

How should I choose between GW-PA600I-FS and GW-PA300I-F?

Choose the GW-PA600I-FS when the system requires higher power capacity, stronger 12V current, or additional 5V auxiliary output. Choose GW-PA300I-F for lower-load 12V systems that do not require the same output headroom.

What should be checked before integrating this PSU into a system?

Before integration, confirm the input voltage range, 12V and 5V output requirements, total system load, hot swap mechanical compatibility, connector matching, thermal design, auxiliary rail usage, and installation clearance.

KEEP EXPLORING

Related products

View category →