Get a quote
PRODUCT VIEW GW-PA1000I-P-F product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

GW-PA1000I-P-F

Hot Swap

INQUIRY READY

GW-PA1000I-P-F

Greatwall / Server Power Supply / Hot Swap

GW-PA1000I-P-F serves Hot Swap Design, Telecom Base Station Systems, Po E Backbone Platforms, Communication Rack Equipment, and Distributed Power Cabinets through 1000W capacity and a stable 56V rail. This configuration delivers a balanced fit for serviceable, high-availability installations.

Model
GW-PA1000I-P-F
Series
Hot Swap
Input Voltage
90-290Vac / 192-288Vdc
Output Voltage
56V
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The GW-PA1000I-P-F is designed for higher-capacity systems that require 56V output, hot swap serviceability, and wide AC / DC input compatibility. It is suitable for telecom infrastructure, communication cabinets, distributed power systems, PoE-related power architecture, industrial communication equipment, and mid-to-high capacity infrastructure platforms where 1000W output provides stronger system margin than lower-power 56V models.

Plan the GW-PA1000I-P-F output wiring around the actual current demand: keep conductors short, use low-resistance terminations, separate power paths from sensitive signal wiring, and preserve access for retightening and inspection. Arrange the enclosure so heat from neighboring components cannot collect around the supply or its connection points.

Qualify the GW-PA1000I-P-F at several load levels, measuring voltage at both the supply terminals and the equipment input rather than relying only on no-load readings. Record cable drop, connector temperature, and enclosure temperature as baseline values. Later maintenance checks can compare against this record to identify loose joints, rising contact resistance, or deteriorating heat dissipation before they interrupt service.

CORE ADVANTAGES

1000W Hot Swap 56V Power Supply for Telecom Infrastructure, Distributed Power Systems, and High-Capacity 56V Platforms

The GW-PA1000I-P-F delivers 1000W output for infrastructure systems that require stable 56V power delivery, including telecom equipment, communication cabinets, distributed power platforms, industrial network systems, and high-capacity 56V power architecture applications. Compared with the 600W 56V model in the same Hot Swap series, this model provides stronger power headroom for heavier system loads and more demanding operating environments.

01

1000W High-Capacity 56V Hot Swap Output

The GW-PA1000I-P-F delivers 1000W output for infrastructure systems that require stable 56V power delivery, including telecom equipment, communication cabinets, distributed power platforms, industrial network systems, and high-capacity 56V power architecture applications. Compared with the 600W 56V model in the same Hot Swap series, this model provides stronger power headroom for heavier system loads and more demanding operating environments.

02

Wide AC / DC Input Compatibility

This model supports 90-290Vac / 192-288Vdc input, making it suitable for equipment that may operate in different AC or DC power distribution environments. The wide input range helps support deployment across telecom sites, industrial cabinets, communication infrastructure, and DC-backed power systems.

03

56V Output for Telecom and Distributed Power Architecture

With a 56V output design, the GW-PA1000I-P-F is suitable for systems that use higher-voltage DC power architecture instead of standard 12V output. This makes it a practical choice for telecom equipment, PoE-related infrastructure, distributed DC power systems, communication hardware, and platforms requiring efficient power distribution before local conversion.

04

Hot Swap Structure for Serviceable Infrastructure

As part of the Hot Swap series, the GW-PA1000I-P-F supports easier replacement and maintenance in compatible systems. This structure is valuable for telecom, network, and industrial infrastructure applications where service convenience and reduced maintenance interruption are important.

05

Stronger 1000W Capacity for Demanding 56V Systems

The 1000W rating gives this model more output headroom than the 600W 56V version, making it suitable for higher-load communication platforms, larger cabinet equipment, distributed power systems, and infrastructure devices that require stable 56V power under continuous operation.

06

Safety Support for Commercial and Infrastructure Deployment

The GW-PA1000I-P-F supports CCC, CB, and CE, making it suitable for commercial equipment, telecom infrastructure, industrial communication systems, and export-oriented power supply projects that require common safety compliance support.

MODEL SELECTION

Compare Greatwall power options.

Review nearby Greatwall models and select the power level, output architecture, and form factor that best match the target system.

Model Power Input Voltage Output Voltage Safety Best-Fit Application
GW-PA70IB 70W 90-290Vac / 192-288Vdc 12V CCC, CB, CE Low-power control boards, compact embedded modules, and small 12V auxiliary infrastructure devices
GW-PA150IB-F 150W 90-290Vac / 192-288Vdc 12V CCC, CB, CE Lightweight 12V platforms, compact industrial equipment, and small serviceable control systems
GW-PA180I-F 180W 90-290Vac / 192-290Vdc 12V CCC, CB, CE Compact server systems, embedded 12V platforms, industrial control devices, and hot swap low-power infrastructure
GW-PA300I-F 300W 90-290Vac / 192-290Vdc 12V CCC, CE Mid-power 12V control platforms, compact server nodes, network control devices, and embedded computing systems
GW-PA600I-FS 600W 90-290Vac / 192-288Vdc 12V / 50A; 5V / 2A CCC, CB, CE Mid-power server platforms, storage appliances, network devices, and cabinet systems requiring 12V main output with 5V auxiliary support
GW-PA600I-P-F 600W 90-290Vac / 190-290Vdc 56V CCC, CB, CE Mid-range 56V telecom equipment, PoE infrastructure, distributed power platforms, and industrial communication systems
GW-PA1000I-P-F 1000W 90-290Vac / 192-288Vdc 56V CCC, CB, CE Higher-capacity 56V telecom systems, distributed power equipment, communication cabinets, and infrastructure platforms requiring stronger output headroom
GW-PA1600I 1600W 90-290Vac / 192-288Vdc 12V / 133.4A; 5Vsb / 2A CCC High-current 12V server platforms, storage systems, and larger computing infrastructure requiring standby output
GW-PA2700I 2700W 90-290Vac / 192-288Vdc 54V CCC, CB, CE, UL High-power 54V platforms, AI infrastructure, telecom systems, and dense power distribution environments
GW-PAH3000I-F 3000W 90-290Vac / 188-400Vdc 53.5V CQC, CB, CE High-capacity 53.5V infrastructure, demanding cabinet systems, and heavy-load power platforms

DEPLOYMENT SCENARIOS

Where GW-PA1000I-P-F fits best.

The GW-PA1000I-P-F is designed for higher-capacity systems that require 56V output, hot swap serviceability, and wide AC / DC input compatibility. It is suitable for telecom infrastructure, communication cabinets, distributed power systems, PoE-related power architecture, industrial communication equipment, and mid-to-high capacity infrastructure platforms where 1000W output provides stronger system margin than lower-power 56V models.

Scenario System Requirement Why GW-PA1000I-P-F Fits
Telecom Cabinet Equipment Stable 56V power for telecom access systems, cabinet equipment, and communication-side power modules 1000W output provides stronger headroom for higher-load telecom infrastructure
High-Capacity PoE Infrastructure Higher-voltage DC power support for systems supplying powered network devices and access equipment 56V output matches common high-voltage power architecture used in PoE-related infrastructure
Distributed DC Power Systems Efficient DC output for equipment using distributed power paths before local conversion 56V architecture supports power distribution across system modules and downstream converters
Industrial Communication Platforms Power support for industrial gateways, communication controllers, monitoring units, and network modules Wide input compatibility helps adapt to different industrial and infrastructure power environments
Edge Power Cabinets Serviceable PSU module for distributed edge sites, access cabinets, and remote infrastructure nodes Hot swap design improves maintenance convenience in cabinet-mounted deployments
Network Power Conversion Systems High-capacity DC source for systems that convert 56V into multiple lower-voltage rails internally 1000W capacity supports heavier internal conversion and connected subsystem load

POWER DESIGN

Reliability notes for continuous operation.

The GW-PA1000I-P-F is built for infrastructure systems that require 56V DC output with more power capacity than the 600W 56V model. Its 1000W output level makes it suitable for telecom equipment, communication cabinets, distributed power systems, PoE-related infrastructure, and industrial network platforms where stable high-voltage DC power and serviceable hot swap design are important.

  • 1000W output capacity supports higher-load 56V telecom equipment, communication systems, distributed power platforms, PoE-related infrastructure, and industrial network devices.
  • 90-290Vac / 192-288Vdc input provides flexible compatibility for different AC and DC power distribution environments.
  • 56V output architecture supports systems that require higher-voltage DC output for power distribution, communication hardware, downstream conversion, or network power applications.
  • Hot swap structure helps simplify module replacement and supports easier maintenance in compatible chassis or cabinet systems.
  • CCC, CB, and CE safety support makes the model suitable for commercial, industrial, and infrastructure deployment projects.
  • Higher-capacity 56V positioning makes this model suitable when 600W output is not enough and stronger system power headroom is required.
  • Practical infrastructure integration supports cabinet systems, telecom access equipment, remote infrastructure nodes, and distributed power platforms that need stable 56V power delivery.
  • Balanced power architecture helps equipment designers avoid oversized 2700W or 3000W modules when the system only requires a mid-to-high capacity 56V power supply.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, and system load before integration.

Installation / Operation Item Guidance
Input Voltage Matching Confirm that the target system supports 90-290Vac / 192-288Vdc input before installation
Output Requirement Verify that the equipment requires 56V output and that the system load is within the 1000W power range
Load Planning Keep long-term operating load within a suitable range to support stable output and service life
Chassis Compatibility Make sure the equipment supports the correct hot swap power module structure and installation method
Connector Matching Confirm connector position, electrical interface, output polarity, and system-level compatibility before integration
Power Architecture Check Ensure the target platform is designed for 56V power input instead of 12V, 53.5V, or 54V architecture
Thermal Clearance Keep intake and exhaust areas clear to avoid heat buildup around the PSU bay
Module Installation Ensure the power supply is fully seated and correctly connected before powering on the system
Routine Maintenance Check dust buildup, connector condition, fan behavior, output stability, and system thermal status during regular service

FAQ

Frequently asked questions about GW-PA1000I-P-F.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the GW-PA1000I-P-F?

The GW-PA1000I-P-F is a 1000W Hot Swap power supply designed for systems that require 56V output, including telecom equipment, distributed power systems, PoE-related infrastructure, communication cabinets, and industrial network platforms.

What input voltage range does this model support?

It supports 90-290Vac / 192-288Vdc input, making it suitable for equipment operating in different AC or DC power environments.

What output voltage does the GW-PA1000I-P-F provide?

The model provides 56V output, which is suitable for platforms designed around higher-voltage DC power architecture.

What is the main advantage of the GW-PA1000I-P-F?

Its main advantage is the combination of 1000W output capacity, 56V power architecture, wide AC / DC input compatibility, and hot swap service convenience for higher-capacity infrastructure systems.

Is this model suitable for telecom infrastructure?

Yes. Its 56V output and 1000W capacity make it suitable for telecom cabinet equipment, communication infrastructure, distributed power systems, and remote infrastructure platforms.

Can this model be used for standard 12V server systems?

Only if the target system is designed to accept 56V input and perform internal conversion. For standard 12V server platforms, a 12V output model such as GW-PA600I-FS, GW-PA300I-F, or GW-PA1600I should be selected.

How should I choose between GW-PA600I-P-F and GW-PA1000I-P-F?

Choose the GW-PA1000I-P-F when the system requires more output headroom, higher continuous load support, or larger 56V infrastructure capacity. Choose GW-PA600I-P-F for mid-range 56V systems with lighter power demand.

What should be checked before integrating this PSU into a system?

Before integration, confirm the input voltage range, 56V output requirement, total system load, hot swap mechanical compatibility, connector matching, system power architecture, thermal design, and installation clearance.

KEEP EXPLORING

Related products

View category →