Get a quote
PRODUCT VIEW G1116-1200WNA product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

G1116-1200WNA

G1116

INQUIRY READY

G1116-1200WNA

Gospower / AC/DC Platinum / G1116

G1116-1200WNA brings together 1200W capacity for Carrier-Grade Networking Gear, Telecom Edge Platforms, Compact Data Systems, and Global & Hybrid Deployments, with an emphasis on dependable performance across distributed operating sites.

Output Power (W):
1200
Length (mm):
185
Width (mm):
73.5
Height (mm):
40
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The G1116-1200WNA is suitable for network and telecom systems that need stronger output than mid-range access platforms while maintaining a compact 1U CRPS footprint. Its 1200W power rating makes it a practical fit for carrier-grade networking, telecom edge platforms, compact data systems, multi-node frames, and mission-critical deployments where uptime, power visibility, and service access are essential. Before integration, confirm the connector mapping, chassis clearance, and supported input conditions against the target power shelf. For long-term service, document fan inspection, connector seating, event-log review, and replacement procedures as part of the maintenance plan. Commissioning should verify grounding, input protection, output stability, and the response of any redundant or hot-swap control logic.

Before integrating the G1116-1200WNA, confirm the mating connector or backplane, input source, output-rail requirements, hot-swap sequence, airflow direction, monitoring interface, redundancy behavior, and service clearance against the target platform.

CORE ADVANTAGES

1200W CRPS Power Supply for Carrier-Grade Networking, Telecom Edge, and Compact Data Systems

1200W Power for Carrier-Grade Infrastructure The G1116-1200WNA is designed for carrier-grade networking gear, telecom edge platforms, compact data systems, and multi-node infrastructure that require stable 1200W power delivery in a compact CRPS module.

01

1200W Power for Carrier-Grade Infrastructure The G1116-1200WNA is designed for carrier-grade networking gear, telecom edge platforms, compact data systems, and multi-node infrastructure that require stable 1200W power delivery in a compact CRPS module.

02

Compact 1U CRPS Mechanical Design With a 185 × 73.5 × 40 mm form factor, this model supports dense modular frames, front-access power shelves, telecom chassis, and compact server platforms where space efficiency and serviceability are important.

03

Wide AC and DC Input Compatibility It supports 90–264Vac AC input and 180–300Vdc DC input, allowing flexible deployment across global AC grids, telecom DC infrastructure, enterprise networks, edge sites, and hybrid power environments.

04

54.5V Main Output for Network Power Architecture The unit provides a 54.5V main output at 22A together with a 12V standby rail, supporting network processors, telecom boards, embedded management modules, PoE-oriented subsystems, and compact data hardware.

05

PMBus 1.2 Digital Power Supervision With PMBus 1.2 support, the G1116-1200WNA enables compatible systems to monitor telemetry, operating status, power behavior, fault information, and remote supervision data.

06

Built for Mission-Critical Uptime Platinum-level efficiency, intelligent fan control, stable thermal behavior, and hot-swappable CRPS design help this model reduce energy loss, manage heat, and support continuous service operation in demanding infrastructure environments.

MODEL SELECTION

Compare Gospower power options.

Review nearby Gospower models and select the power level, output architecture, efficiency grade, and form factor that best match the target system.

Model Power Output Current Efficiency Form Factor Recommended Use
G1116-0600WNA 600w 12V Platinum CRPS Microservers and branch network appliances
G1116-0900WNA 900w 12V Platinum CRPS Virtualization hosts and mixed I/O systems
G1116-1200WNA 1200w 12V Platinum CRPS AI inference nodes and high-concurrency servers
G1116-1600WNA 1600w 12V Platinum CRPS Dense compute racks and accelerator platforms
G1116-2000WNA 2000w 12V Platinum CRPS Large AI clusters and backbone compute systems

DEPLOYMENT SCENARIOS

Where G1116-1200WNA fits best.

The G1116-1200WNA is suitable for network and telecom systems that need stronger output than mid-range access platforms while maintaining a compact 1U CRPS footprint. Its 1200W power rating makes it a practical fit for carrier-grade networking, telecom edge platforms, compact data systems, multi-node frames, and mission-critical deployments where uptime, power visibility, and service access are essential.

Scenario System Requirement Why G1116-1200WNA Fits
Carrier-Grade Networking Stable power for switching boards, network processors, interface modules, fans, and control logic 1200W output provides strong headroom for sustained network workloads
Telecom Edge Platforms Reliable output for access equipment, service cards, communication boards, and management modules Wide AC/DC input supports telecom and hybrid power environments
Compact Data Systems Power support for storage controllers, SSDs, embedded boards, and network interfaces 54.5V main output supports compact data and network-oriented architectures
Multi-Node Modular Frames Continuous power for multiple compute or networking nodes in dense chassis Compact CRPS design supports power density and front-serviceable integration
Hybrid Power Deployments Operation across AC and DC infrastructure environments 90–264Vac and 180–300Vdc input support improves deployment flexibility
Mission-Critical Installations Fast service access and stable operation under long-duty cycles Hot-swappable CRPS architecture supports maintenance with less service disruption

POWER DESIGN

Reliability notes for continuous operation.

The G1116-1200WNA is built for telecom edge, carrier-grade networking, and compact data systems where stable 54.5V output, high efficiency, and service-friendly integration are important. Its 1200W rating gives system designers meaningful operating margin for dense modular systems and mission-critical network infrastructure.

  • 1200W output capacity supports carrier-grade networking gear, telecom edge systems, compact data platforms, multi-node frames, and front-access power shelves.
  • 54.5V main output at 22A supports network processors, telecom boards, PoE-oriented subsystems, embedded management modules, and compact data hardware.
  • 12V standby rail supports system control logic, standby circuits, monitoring functions, and embedded management modules.
  • Universal AC/DC input support allows deployment across global AC grids, telecom DC infrastructure, edge cabinets, enterprise racks, and hybrid power sites.
  • PMBus 1.2 communication provides visibility into telemetry, operating status, power conditions, diagnostics, and remote supervision data in supported platforms.
  • Platinum-level efficiency helps reduce energy loss and thermal stress during sustained workloads.
  • Intelligent fan control adjusts cooling behavior based on system load and thermal conditions.
  • Hot-swappable CRPS design helps maintain service continuity during maintenance or replacement.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, redundancy requirements, and system load before integration.

Installation / Operation Item Guidance
Load Planning Review network board demand, telecom module load, compact data hardware, fan power, and standby consumption before deployment
Chassis Fitment Confirm the 185 × 73.5 × 40 mm CRPS size before mechanical integration
Input Connection Use within the supported 90–264Vac or 180–300Vdc input range
Output Compatibility Verify that the platform supports a 54.5V main power input
Standby Rail Check Confirm that the 12V standby rail matches the platform’s management and auxiliary logic requirements
Hot-Swap Handling Ensure the module is fully seated with the power shelf or backplane connector before system operation
Airflow Clearance Keep intake and exhaust areas open to avoid heat buildup in dense modular frames or compact telecom chassis
Monitoring Setup Use PMBus 1.2 where supported for telemetry, diagnostics, fault alerts, and maintenance visibility

FAQ

Frequently asked questions about G1116-1200WNA.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the G1116-1200WNA?

The G1116-1200WNA is a 1200W CRPS power supply designed for carrier-grade networking, telecom edge platforms, compact data systems, and mission-critical infrastructure.

What is the size of this model?

This model uses a compact 1U CRPS form factor with a size of 185 × 73.5 × 40 mm, making it suitable for dense modular frames and front-access power shelf designs.

What input voltage range does it support?

The G1116-1200WNA supports 90–264Vac AC input and 180–300Vdc DC input for flexible deployment across different infrastructure power environments.

Does the G1116-1200WNA support PMBus monitoring?

Yes. The unit supports PMBus 1.2, allowing compatible systems to monitor telemetry, operating status, power behavior, diagnostics, and remote supervision data.

Why is this model suitable for carrier-grade networking?

Its 1200W output, 54.5V main rail, compact CRPS structure, and hot-swappable design make it suitable for networking systems that need stable power and service continuity.

How does this PSU support telecom edge platforms?

The wide AC/DC input range, 54.5V output, PMBus visibility, and compact 1U form factor help support telecom edge platforms deployed in mixed AC/DC power environments.

What makes this model useful for compact data systems?

The 1200W capacity provides strong headroom for storage controllers, SSDs, embedded boards, network processors, fans, and management circuits in compact data platforms.

What should be checked before integrating this PSU?

Confirm the 54.5V input requirement, 12V standby demand, connector compatibility, chassis clearance, airflow path, hot-swap fitment, and PMBus support before deployment.

KEEP EXPLORING

Related products

View category →