Get a quote
PRODUCT VIEW G1116-1600WNA product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

G1116-1600WNA

G1116

INQUIRY READY

G1116-1600WNA

Gospower / AC/DC Platinum / G1116

G1116-1600WNA is configured around High-Power Telecom Systems, Dense Network Appliances, and Modular Edge Platforms. By combining 1600W capacity, the model offers practical deployment in systems that cannot tolerate unstable power.

Output Power (W):
1600
Length (mm):
185
Width (mm):
73.5
Height (mm):
40
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The G1116-1600WNA is suitable for network and telecom systems that require stronger power delivery than mid-range models while keeping the compact 1U CRPS footprint. Its 1600W output makes it a strong fit for high-power telecom systems, dense network appliances, modular edge platforms, AI-assisted service nodes, and heavy mixed-load infrastructure where uptime, thermal control, and remote visibility are critical. Qualification should include airflow direction, thermal margin, cable routing, and access for routine module replacement. Backplane pinout, control signaling, and mechanical retention should be checked together before the unit is approved for production use.

Before integrating the G1116-1600WNA, confirm the mating connector or backplane, input source, output-rail requirements, hot-swap sequence, airflow direction, monitoring interface, redundancy behavior, and service clearance against the target platform.

CORE ADVANTAGES

1600W CRPS Power Supply for High-Power Telecom Systems, Dense Network Appliances, and Modular Edge Platforms

1600W Power for High-Demand Network Infrastructure The G1116-1600WNA is designed for high-power telecom systems, dense network appliances, modular edge platforms, and mission-critical infrastructure that require strong 1600W power delivery in a compact CRPS module.

01

1600W Power for High-Demand Network Infrastructure The G1116-1600WNA is designed for high-power telecom systems, dense network appliances, modular edge platforms, and mission-critical infrastructure that require strong 1600W power delivery in a compact CRPS module.

02

Compact 1U CRPS Mechanical Design With a 185 × 73.5 × 40 mm form factor, this model supports high-density chassis, front-access power shelves, telecom racks, modular network systems, and space-constrained edge enclosures.

03

Wide AC and DC Input Compatibility It supports 90–264Vac AC input and 180–300Vdc DC input, allowing flexible deployment across global AC grids, DC telecom infrastructure, data facilities, edge sites, and multi-region network environments.

04

54.5V Main Output for High-Load Platforms The unit provides a 54.5V main output at 29.3A together with a 12V standby rail, supporting control boards, management circuitry, PoE-oriented subsystems, telecom modules, and dense network hardware.

05

PMBus 1.2 Digital Power Management With PMBus 1.2 integration, the G1116-1600WNA enables compatible platforms to monitor telemetry, fault reporting, power behavior, operating conditions, and remote adjustment data.

06

Built for Continuous Service Operation Platinum-level efficiency, smart fan modulation, predictable thermal behavior, and hot-swappable CRPS design help this model reduce waste heat, improve maintainability, and support uninterrupted service in demanding deployments.

MODEL SELECTION

Compare Gospower power options.

Review nearby Gospower models and select the power level, output architecture, efficiency grade, and form factor that best match the target system.

Model Power Output Current Efficiency Form Factor Recommended Use
G1116-0600WNA 600w 12V Platinum CRPS Microservers and branch network appliances
G1116-0900WNA 900w 12V Platinum CRPS Virtualization hosts and mixed I/O systems
G1116-1200WNA 1200w 12V Platinum CRPS AI inference nodes and high-concurrency servers
G1116-1600WNA 1600w 12V Platinum CRPS Dense compute racks and accelerator platforms
G1116-2000WNA 2000w 12V Platinum CRPS Large AI clusters and backbone compute systems

DEPLOYMENT SCENARIOS

Where G1116-1600WNA fits best.

The G1116-1600WNA is suitable for network and telecom systems that require stronger power delivery than mid-range models while keeping the compact 1U CRPS footprint. Its 1600W output makes it a strong fit for high-power telecom systems, dense network appliances, modular edge platforms, AI-assisted service nodes, and heavy mixed-load infrastructure where uptime, thermal control, and remote visibility are critical.

Scenario System Requirement Why G1116-1600WNA Fits
High-Power Telecom Systems Stable power for telecom boards, service cards, control modules, fans, and management logic 1600W output supports continuous telecom workloads in dense chassis
Dense Network Appliances Reliable output for switching, routing, firewall, SD-WAN, and traffic processing hardware 54.5V main rail supports high-load network power architecture
Modular Edge Platforms Power support for compute modules, storage, network interfaces, and local services Compact CRPS design fits distributed edge systems with limited space
AI-Assisted Network Nodes Stable power for traffic analysis, inference modules, processors, and interface boards Higher output capacity provides headroom for intelligent network workloads
Multi-Region Infrastructure Operation across varied AC and DC power environments 90–264Vac and 180–300Vdc input support improves deployment flexibility
Front-Serviceable Power Shelves Easy access for maintenance in always-on rack systems Hot-swappable CRPS architecture supports quick replacement with less service interruption

POWER DESIGN

Reliability notes for continuous operation.

The G1116-1600WNA is built for high-power telecom, dense networking, and modular edge infrastructure where stable 54.5V delivery, high efficiency, and service-friendly CRPS integration are important. Its 1600W rating gives system designers strong operating margin for heavy network loads, telecom power shelves, and high-density service platforms.

  • 1600W output capacity supports high-power telecom systems, dense network appliances, modular edge platforms, AI-assisted service nodes, and front-access power shelves.
  • 54.5V main output at 29.3A supports telecom boards, PoE-oriented subsystems, dense network hardware, management circuits, and distributed infrastructure modules.
  • 12V standby rail supports control boards, auxiliary logic, monitoring functions, and embedded management modules.
  • Universal AC/DC input support allows deployment across global AC grids, DC telecom infrastructure, edge cabinets, enterprise racks, and hybrid power sites.
  • PMBus 1.2 communication provides visibility into telemetry, operating status, fault reporting, power behavior, and remote management data in supported platforms.
  • Platinum-level efficiency helps reduce energy loss and waste heat during long-duration workloads.
  • Smart fan modulation adjusts cooling behavior according to system load and thermal conditions.
  • Hot-swappable CRPS design supports faster replacement and helps maintain service continuity during maintenance.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, redundancy requirements, and system load before integration.

Installation / Operation Item Guidance
Load Planning Review telecom board demand, network processor load, PoE subsystem power, fan demand, and standby consumption before deployment
Chassis Fitment Confirm the 185 × 73.5 × 40 mm CRPS size before mechanical integration
Input Connection Use within the supported 90–264Vac or 180–300Vdc input range
Output Compatibility Verify that the platform supports a 54.5V main power input
Standby Rail Check Confirm that the 12V standby rail matches the platform’s management and auxiliary logic requirements
Hot-Swap Handling Ensure the module is fully seated with the power shelf or backplane connector before system operation
Airflow Clearance Keep intake and exhaust areas open to avoid heat buildup in dense rack systems and modular edge enclosures
Monitoring Setup Use PMBus 1.2 where supported for telemetry, diagnostics, fault alerts, and remote maintenance visibility

FAQ

Frequently asked questions about G1116-1600WNA.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the G1116-1600WNA?

The G1116-1600WNA is a 1600W CRPS power supply designed for high-power telecom systems, dense network appliances, modular edge platforms, and mission-critical infrastructure.

What is the size of this model?

This model uses a compact 1U CRPS form factor with a size of 185 × 73.5 × 40 mm, making it suitable for dense chassis and front-access power shelf designs.

What input voltage range does it support?

The G1116-1600WNA supports 90–264Vac AC input and 180–300Vdc DC input for flexible deployment across different infrastructure power environments.

Does the G1116-1600WNA support PMBus monitoring?

Yes. The unit supports PMBus 1.2, allowing compatible systems to monitor telemetry, operating status, fault reporting, diagnostics, and remote power data.

Why is this model suitable for high-power telecom systems?

Its 1600W output, 54.5V main rail, compact CRPS footprint, and wide AC/DC input support make it suitable for telecom racks, service platforms, and dense communication systems.

How does this PSU support dense network appliances?

The 54.5V output at 29.3A provides strong power capacity for switching boards, routing hardware, security appliances, traffic processing modules, fans, and management circuitry.

What makes this model useful for modular edge platforms?

Its compact 1U structure, strong output capacity, hot-swap design, and PMBus visibility help support edge platforms that combine compute, storage, networking, and local services.

What should be checked before integrating this PSU?

Confirm the 54.5V input requirement, 12V standby demand, connector compatibility, chassis clearance, airflow path, hot-swap fitment, and PMBus support before deployment.

KEEP EXPLORING

Related products

View category →