Get a quote
PRODUCT VIEW G1136-0800WNA product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

G1136-0800WNA

G1136

INQUIRY READY

G1136-0800WNA

Gospower / AC/DC Platinum / G1136

G1136-0800WNA focuses on Enterprise Servers, Storage Expansion Systems, High-Performance Networking, and Data Center Platforms, where a design centered on 800W capacity supports practical deployment in systems that cannot tolerate unstable power.

Output Power (W):
800
Length (mm):
185
Width (mm):
73.5
Height (mm):
40
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The G1136-0800WNA is suitable for advanced data infrastructure platforms that need stronger 12V output, compact installation, and dependable operation under heavier mixed loads. Its 800W capacity makes it a practical fit for storage systems, entry AI nodes, enterprise servers, and network equipment that require higher power density without moving away from the CRPS form factor. Before integration, confirm the connector mapping, chassis clearance, and supported input conditions against the target power shelf. For long-term service, document fan inspection, connector seating, event-log review, and replacement procedures as part of the maintenance plan. Commissioning should verify grounding, input protection, output stability, and the response of any redundant or hot-swap control logic. Qualification should include airflow direction, thermal margin, cable routing, and access for routine module replacement. A documented acceptance test helps preserve consistent behavior when modules, backplanes, or surrounding hardware are serviced.

Before integrating the G1136-0800WNA, confirm the mating connector or backplane, input source, output-rail requirements, hot-swap sequence, airflow direction, monitoring interface, redundancy behavior, and service clearance against the target platform.

CORE ADVANTAGES

800W High-Efficiency CRPS Power Supply for Advanced Data Infrastructure

800W Power for Advanced Infrastructure Loads The G1136-0800WNA is designed for enterprise servers, storage expansion systems, network infrastructure, and entry-level AI nodes that require stable 800W power in a compact CRPS platform.

01

800W Power for Advanced Infrastructure Loads The G1136-0800WNA is designed for enterprise servers, storage expansion systems, network infrastructure, and entry-level AI nodes that require stable 800W power in a compact CRPS platform.

02

Compact CRPS 1U Form Factor With a 185 × 73.5 × 40 mm mechanical size, this model supports high-density rack systems where power capacity, space efficiency, airflow control, and service access must be balanced.

03

Wide Input Range for Global Deployment It supports 90–264Vac AC input and 180–300Vdc DC input, allowing the unit to operate across different data center, telecom, enterprise, and distributed infrastructure power environments.

04

High-Current 12V Output Performance The unit delivers a 12V main output at 66.66A and a 12V standby output at 2.1A, supporting processors, storage backplanes, network cards, cooling fans, and system management circuits.

05

Digital Power Monitoring with PMBus With PMBus 1.2 communication, the G1136-0800WNA enables compatible platforms to monitor operating status, power conditions, fault signals, and system-level power behavior.

06

Designed for Efficient, Reliable Operation Active PFC, intelligent fan speed regulation, reverse airflow capability, and support for UL, CE, FCC, CB, and CCC certifications help this model support demanding infrastructure deployments with stable long-term performance.

MODEL SELECTION

Compare Gospower power options.

Review nearby Gospower models and select the power level, output architecture, efficiency grade, and form factor that best match the target system.

Model Power Output Current Efficiency Form Factor Recommended Use
G1136-0550WNA 550W 12V Platinum CRPS Enterprise servers and mixed workloads
G1136-0800WNA 800W 12V Platinum CRPS Storage systems and entry AI nodes
G1136-1200WNA 1200W 12V Platinum CRPS Dense compute and performance servers
G1136-1300WNA 1300W 12V Platinum CRPS High-concurrency compute and I/O platforms
G1136-1600WNA 1600W 12V Platinum CRPS Compute-heavy servers and expansion systems

DEPLOYMENT SCENARIOS

Where G1136-0800WNA fits best.

The G1136-0800WNA is suitable for advanced data infrastructure platforms that need stronger 12V output, compact installation, and dependable operation under heavier mixed loads. Its 800W capacity makes it a practical fit for storage systems, entry AI nodes, enterprise servers, and network equipment that require higher power density without moving away from the CRPS form factor.

Scenario System Requirement Why G1136-0800WNA Fits
Storage Expansion Systems Stable power for controllers, backplanes, and multiple drive groups 800W capacity supports storage-heavy platforms with strong 12V output
Entry AI Nodes Power support for compact accelerators, CPUs, memory, and system fans High-current 12V delivery provides useful headroom for AI-assisted workloads
Enterprise Servers Reliable output for compute, storage, and management subsystems Balanced power profile supports mixed enterprise server configurations
Network Infrastructure Long-hour operation for switches, routers, gateways, and service appliances Wide input support and regulated output fit always-on network environments
Data Processing Platforms Stable power for analytics, caching, and application acceleration systems 800W rating supports higher workload density in compact rack designs
Distributed IT Cabinets Serviceable power for remote infrastructure and edge cabinet equipment CRPS structure and PMBus monitoring help simplify maintenance visibility

POWER DESIGN

Reliability notes for continuous operation.

The G1136-0800WNA is built for systems that require a higher power ceiling while maintaining compact CRPS integration. Its 800W output level gives system designers more flexibility for storage expansion, network modules, entry AI hardware, and data processing workloads in space-constrained platforms.

  • 800W output capacity supports storage systems, enterprise servers, network equipment, data processing platforms, and entry AI nodes.
  • 12V main output at 66.66A provides dependable power for system boards, drives, accelerator cards, fans, and management modules.
  • Active PFC helps improve input power quality and supports efficient conversion across different AC operating conditions.
  • Wide AC/DC input compatibility allows deployment in data centers, telecom cabinets, enterprise racks, and distributed infrastructure sites.
  • PMBus 1.2 communication provides visibility into voltage, current, operating status, and fault information in supported systems.
  • Intelligent fan speed regulation helps balance cooling performance, acoustic behavior, and thermal stability under variable workloads.
  • Reverse airflow capability supports chassis layouts that require alternative PSU cooling direction.
  • Protection functions such as OVP, OCP, OTP, and SCP help reduce operating risk during abnormal electrical or thermal conditions.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, redundancy requirements, and system load before integration.

Installation / Operation Item Guidance
Load Planning Check total demand from processors, storage devices, network cards, accelerator modules, fans, and control boards before deployment
Chassis Fitment Confirm the 185 × 73.5 × 40 mm CRPS form factor before mechanical integration
Input Connection Use within the supported 90–264Vac or 180–300Vdc input range
Power Headroom Leave reasonable margin for drive spin-up, accelerator load changes, and network traffic peaks
Airflow Direction Match standard or reverse airflow with the chassis cooling layout
Thermal Clearance Keep the PSU inlet, exhaust path, and surrounding airflow channel unobstructed
Monitoring Setup Use PMBus 1.2 where supported for telemetry, fault alerts, and maintenance visibility
Service Inspection Inspect fan condition, connector seating, dust buildup, and airflow path during regular service intervals

FAQ

Frequently asked questions about G1136-0800WNA.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the G1136-0800WNA?

The G1136-0800WNA is an 800W CRPS power supply designed for advanced data infrastructure, including enterprise servers, storage systems, network equipment, and entry AI nodes.

What is the size of this model?

This model uses a compact 1U CRPS form factor with a size of 185 × 73.5 × 40 mm, making it suitable for high-density rack-mounted systems.

What input voltage range does it support?

The G1136-0800WNA supports 90–264Vac AC input and 180–300Vdc DC input for flexible deployment across different infrastructure power environments.

What output does the G1136-0800WNA provide?

It provides a 12V main output at 66.66A and a 12V standby output at 2.1A for system operation, standby functions, and platform management.

Is this model suitable for storage systems and entry AI nodes?

Yes. Its 800W capacity and high-current 12V output make it suitable for storage expansion systems, compact AI nodes, and mixed data infrastructure platforms.

Does the G1136-0800WNA support PMBus monitoring?

Yes. The unit supports PMBus 1.2, allowing compatible systems to monitor operating status, power conditions, and fault information.

Can this model support reverse airflow?

Yes. Reverse airflow capability is available for chassis designs that require a specific PSU cooling direction.

What certifications can this model support?

The G1136-0800WNA can support UL, CE, FCC, CB, and CCC certifications for safety and EMC compliance in global server and infrastructure applications.

KEEP EXPLORING

Related products

View category →