Get a quote
PRODUCT VIEW G1179-0250WNA product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

G1179-0250WNA

G1179

INQUIRY READY

G1179-0250WNA

Gospower / 1+1 2U PDB / G1179

G1179-0250WNA offers 250W capacity to Data Infrastructure, Industrial Servers, and Networking Equipment. That balance supports reliable integration in space-conscious equipment.

Output Power (W):
250
Length (mm):
265
Width (mm):
77
Height (mm):
84
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The G1179-0250WNA is suitable for compact 2U systems that require more power headroom than low-load control platforms while still maintaining a space-efficient internal power structure. Its 250W output capacity and multi-rail design make it a practical fit for industrial servers, networking equipment, storage-control devices, monitoring systems, and branch infrastructure where stable rail distribution, redundancy support, and reliable operation are important.

Before integrating the G1179-0250WNA, confirm the mating connector or backplane, input source, output-rail requirements, hot-swap sequence, airflow direction, monitoring interface, redundancy behavior, and service clearance against the target platform.

CORE ADVANTAGES

250W 2U Power Distribution Board for Data Infrastructure, Industrial Servers, and Networking Equipment

250W Power Distribution for Compact 2U Infrastructure The G1179-0250WNA is designed for data infrastructure systems, industrial servers, storage equipment, networking platforms, and embedded computing devices that require stable internal power distribution in a compact 2U architecture.

01

250W Power Distribution for Compact 2U Infrastructure The G1179-0250WNA is designed for data infrastructure systems, industrial servers, storage equipment, networking platforms, and embedded computing devices that require stable internal power distribution in a compact 2U architecture.

02

2U Power Distribution Board Structure With a 265 × 77 × 84 mm mechanical size, this model supports 2U chassis layouts where multi-rail power routing, organized cable integration, and reliable system-level distribution are important.

03

1+1 Redundant Power Architecture The board supports a 1+1 redundant configuration, helping improve power availability in equipment where continuous operation, backup power paths, service access, and uptime protection are required.

04

Multiple Output Rails for System Integration The G1179-0250WNA provides +12V, +5V, +3.3V, -12V, and +5V standby outputs, supporting server boards, storage logic, network modules, industrial control circuits, fans, standby logic, and auxiliary system components.

05

Designed for Industrial, Server, and Network Platforms This power distribution board is suitable for compact industrial servers, branch infrastructure devices, storage-control systems, access-layer network equipment, monitoring platforms, and embedded infrastructure hardware.

06

Built for Reliable Internal Power Delivery With redundant architecture, multi-rail output support, compact 2U mechanical integration, digital monitoring support, and safety/EMC compliance options, the G1179-0250WNA helps simplify internal power distribution for compact infrastructure systems.

MODEL SELECTION

Compare Gospower power options.

Review nearby Gospower models and select the power level, output architecture, efficiency grade, and form factor that best match the target system.

Model Power Use Role Input Form Factor Best-Fit Application
G1179-0150WNA 150w Standby and control-board power distribution AC/DC 1+1 2U PDB Compact control servers, monitoring units, and low-power storage logic
G1179-0250WNA 250w Entry-level redundant PDB for edge service hardware AC/DC 1+1 2U PDB Branch gateways, access appliances, and small edge compute boxes
G1179-0350WNA 350w Multi-rail distribution for storage and service nodes AC/DC 1+1 2U PDB NAS controllers, backup systems, lightweight VM nodes, and edge data devices
G1179-0460WNA 460w Balanced power board for network and I/O-heavy systems AC/DC 1+1 2U PDB Routing platforms, SD-WAN appliances, firewall systems, and service gateways
G1179-0550WNA 550w Higher-margin PDB for compact compute expansion AC/DC 1+1 2U PDB Micro server clusters, storage-cache platforms, and compact hosting appliances
G1179-0800WNA 800w Integrated compute-storage distribution platform AC/DC 1+1 2U PDB POP edge nodes, CDN cache systems, aggregation appliances, and edge data platforms
G1179-1300WNA 1300w High-capacity 2U PDB for dense service infrastructure AC/DC 1+1 2U PDB AI-assisted edge nodes, high-density compute appliances, and hybrid workload systems
G1179-1600WNA Peak Peak-load 2U PDB for scalable compact infrastructure AC/DC 1+1 2U PDB

DEPLOYMENT SCENARIOS

Where G1179-0250WNA fits best.

The G1179-0250WNA is suitable for compact 2U systems that require more power headroom than low-load control platforms while still maintaining a space-efficient internal power structure. Its 250W output capacity and multi-rail design make it a practical fit for industrial servers, networking equipment, storage-control devices, monitoring systems, and branch infrastructure where stable rail distribution, redundancy support, and reliable operation are important.

Scenario System Requirement Why G1179-0250WNA Fits
Industrial Server Systems Internal power routing for control boards, compute modules, fans, and monitoring circuits 250W capacity provides practical headroom for compact industrial server hardware
Branch Network Appliances Stable rail support for routing logic, access modules, security boards, and interface circuits Multi-rail output supports mixed networking and control requirements
Storage-Control Devices Power distribution for storage controllers, small backplanes, drive-related logic, and cooling modules +12V, +5V, and +3.3V rails support storage-related electronics
Monitoring Platforms Reliable standby and control power for sensors, system logic, and management boards +5V standby output supports monitoring and system wake functions
Embedded Infrastructure Board-level power delivery for I/O modules, control electronics, and auxiliary circuits Compact 2U layout supports dense embedded system integration
Redundant Compact Systems Backup power path support for equipment requiring improved service continuity 1+1 redundant architecture helps strengthen system availability

POWER DESIGN

Reliability notes for continuous operation.

The G1179-0250WNA is built for compact industrial, server, storage, networking, and embedded infrastructure where internal power distribution, multiple voltage rails, and redundant architecture are more important than standalone high-wattage PSU capacity. Its 2U structure helps system designers manage several output rails inside constrained chassis while supporting 1+1 redundancy for improved reliability and service continuity.

  • 250W power distribution capacity supports industrial servers, branch network appliances, storage-control devices, monitoring platforms, embedded infrastructure, and redundant compact systems.
  • 1+1 redundant design helps improve power availability by supporting backup power path architecture in compatible system designs.
  • +12V output at 20.83A supports main system loads, server boards, network modules, cooling devices, storage-related components, and board-level power routing.
  • +5V output at 10A supports logic circuits, storage electronics, interface boards, auxiliary modules, and control-related components.
  • +3.3V output at 8A supports low-voltage digital circuits, embedded logic, communication modules, and onboard electronic devices.
  • -12V output at 0.5A supports legacy or auxiliary signal requirements in compatible system designs.
  • +5V standby output at 3A supports standby logic, management controllers, monitoring circuits, and system wake functions.
  • 265 × 77 × 84 mm mechanical structure supports compact 2U chassis integration and organized internal installation.
  • Broad AC/DC input compatibility supports flexible deployment across different power environments.
  • Digital control and PMBus 1.2 support help compatible systems monitor power behavior, operating status, and diagnostic information.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, redundancy requirements, and system load before integration.

Installation / Operation Item Guidance
System Role Check Confirm that the target system requires a 2U power distribution board rather than a standalone CRPS power supply module
Redundancy Planning Verify that the chassis and upstream power modules support the intended 1+1 redundant configuration
Chassis Fitment Confirm the 265 × 77 × 84 mm mechanical size before installation
Output Rail Matching Check +12V, +5V, +3.3V, -12V, and +5V standby requirements against the target system load
Load Budget Review Calculate total power demand from server boards, storage logic, network modules, fans, standby circuits, and control components
Connector Compatibility Confirm connector layout, cable harness routing, pin definition, and mating interfaces before integration
Thermal Layout Ensure proper airflow around the board, cable harnesses, and nearby heat-generating components
System Validation Test startup behavior, standby function, redundancy response, rail stability, thermal behavior, and load response before deployment

FAQ

Frequently asked questions about G1179-0250WNA.

Key answers for specification matching, installation planning, and system integration.

What type of product is the G1179-0250WNA?

The G1179-0250WNA is a 250W 2U power distribution board designed for industrial servers, data infrastructure systems, networking equipment, storage-control devices, and embedded platforms.

What is the size of this model?

This model uses a compact 2U structure with a size of 265 × 77 × 84 mm, making it suitable for space-constrained internal system layouts.

What systems is this model suitable for?

It is suitable for compact industrial servers, branch network appliances, storage-control systems, monitoring platforms, embedded infrastructure devices, and lightweight server equipment.

Does the G1179-0250WNA support redundant power architecture?

Yes. The board supports a 1+1 redundant configuration, helping improve power availability in compatible system designs.

What output rails does this board provide?

The G1179-0250WNA provides multiple output rails, including +12V at 20.83A, +5V at 10A, +3.3V at 8A, -12V at 0.5A, and +5V standby at 3A.

Why is this model suitable for industrial servers and networking equipment?

Its 250W capacity, multi-rail output design, 2U structure, and redundant architecture make it suitable for compact systems that need stable internal power routing for compute boards, network modules, control logic, and cooling devices.

What makes this model different from the G1179-0150WNA?

Compared with the G1179-0150WNA, the G1179-0250WNA provides higher power distribution capacity and stronger +12V output, making it better suited for branch network appliances, industrial server systems, and compact storage-control equipment with higher internal load demand.

What should be checked before integrating this board?

Confirm the mechanical fit, connector interface, output rail requirements, total load budget, redundancy design, cable harness layout, airflow path, thermal margin, and system-level compatibility before integration.

KEEP EXPLORING

Related products

View category →