Get a quote
PRODUCT VIEW G1482-1300WNA product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

G1482-1300WNA

G1482

INQUIRY READY

G1482-1300WNA

Gospower / AC/DC Platinum / G1482

G1482-1300WNA is configured around PoE, Networking, and AI Infrastructure. The combination of 1300W capacity gives operators clear headroom for sustained real-world workloads.

Output Power (W):
1300
Length (mm):
185
Width (mm):
73.5
Height (mm):
40
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The G1482-1300WNA is suitable for PoE and networking platforms that need significantly higher 54.5V output capacity than mid-range models. Its 1300W rating makes it a strong fit for POP cloud clusters, high-port PoE systems, telecom aggregation platforms, AI-assisted network nodes, and multi-service infrastructure where power density, uptime, and remote visibility are essential. Allow practical headroom for startup demand and transient loads, while keeping intake and exhaust paths clear throughout continuous operation. Before integration, confirm the connector mapping, chassis clearance, and supported input conditions against the target power shelf. For long-term service, document fan inspection, connector seating, event-log review, and replacement procedures as part of the maintenance plan.

Before integrating the G1482-1300WNA, confirm the mating connector or backplane, input source, output-rail requirements, hot-swap sequence, airflow direction, monitoring interface, redundancy behavior, and service clearance against the target platform.

CORE ADVANTAGES

1300W CRPS Power Supply for PoE, Networking, and AI Infrastructure

1300W Power for High-Capacity PoE Systems The G1482-1300WNA is designed for PoE switches, telecom equipment, AI hardware, and advanced networking systems that require strong 1300W power delivery in a compact CRPS power module.

01

1300W Power for High-Capacity PoE Systems The G1482-1300WNA is designed for PoE switches, telecom equipment, AI hardware, and advanced networking systems that require strong 1300W power delivery in a compact CRPS power module.

02

Compact 1U CRPS Mechanical Design With a 185 × 73.5 × 40 mm form factor, this model supports high-density network chassis, rack-mounted PoE platforms, telecom cabinets, and space-constrained infrastructure deployments.

03

Wide AC and DC Input Compatibility It supports 90–264Vac AC input and 180–300Vdc DC input, allowing flexible deployment across enterprise networks, data facilities, telecom rooms, edge sites, and global power environments.

04

54.5V Main Output for Large PoE Loads The unit provides a 54.5V main output at 23.85A together with a 12V standby output at 3A, supporting high-power PoE distribution, switching boards, management logic, and auxiliary system control.

05

Digital Control with PMBus Monitoring With full digital control and PMBus 1.2 support, the G1482-1300WNA enables compatible systems to monitor operating status, telemetry, voltage behavior, current conditions, and fault information.

06

Built for Efficient Mission-Critical Networking Platinum-grade efficiency, active PFC, advanced fan control, reverse airflow support, and global safety and EMC compliance help this model support stable operation in high-demand PoE and AI network infrastructure.

MODEL SELECTION

Compare Gospower power options.

Review nearby Gospower models and select the power level, output architecture, efficiency grade, and form factor that best match the target system.

Model Power Output Current Efficiency Form Factor Recommended Use
G1482-0600WNA 600w 12V Platinum CRPS SD-WAN gateways and compact edge storage
G1482-0920WNA 920w 12V Platinum CRPS Multi-radio access systems and cache servers
G1482-1300WNA 1300w 12V Platinum CRPS POP compute nodes and cloud service clusters
G1482-1600WNA 1600w 12V Platinum CRPS Multi-tenant edge platforms and AI gateways
G1482-2000WNA 2000w 12V Platinum CRPS Data center edge racks and large POP deployments

DEPLOYMENT SCENARIOS

Where G1482-1300WNA fits best.

The G1482-1300WNA is suitable for PoE and networking platforms that need significantly higher 54.5V output capacity than mid-range models. Its 1300W rating makes it a strong fit for POP cloud clusters, high-port PoE systems, telecom aggregation platforms, AI-assisted network nodes, and multi-service infrastructure where power density, uptime, and remote visibility are essential.

Scenario System Requirement Why G1482-1300WNA Fits
High-Port PoE Switches Stable power for dense PoE ports, switching logic, fans, and management boards 54.5V output at 23.85A supports larger PoE power budgets
POP Cloud Clusters Continuous power for localized compute, routing, caching, and access services 1300W capacity supports compact infrastructure with stronger operating headroom
Telecom Aggregation Platforms Reliable output for communication cards, access modules, and control systems Wide AC/DC input supports varied telecom and distributed site conditions
AI Network Appliances Power support for traffic analysis, local inference, and intelligent routing High output capacity supports AI-assisted network workloads in compact systems
Multi-Service Edge Nodes Balanced power for switching, security, storage, and application delivery CRPS structure fits modular edge platforms with mixed service demand
Smart Campus Infrastructure Stable power for PoE cameras, Wi-Fi access points, controllers, and gateways 54.5V architecture supports connected-device networks with higher load density

POWER DESIGN

Reliability notes for continuous operation.

The G1482-1300WNA is built for PoE networking and AI-assisted infrastructure where higher 54.5V capacity, compact integration, and continuous-duty reliability are important. Its 1300W power level gives system designers more margin for dense PoE loads, POP deployments, telecom aggregation, and multi-service edge platforms.

  • 1300W output capacity supports high-port PoE switches, POP cloud clusters, telecom aggregation systems, AI network appliances, and multi-service edge nodes.
  • 54.5V main output at 23.85A supports PoE-oriented power distribution for high-density switching, access, and connected-device infrastructure.
  • 12V standby output at 3A supports management boards, standby operation, control circuits, and auxiliary system logic.
  • Active PFC helps improve input power quality and supports efficient conversion across different AC operating conditions.
  • Wide AC/DC input compatibility allows deployment in enterprise networks, telecom rooms, data facilities, edge cabinets, and distributed infrastructure sites.
  • PMBus 1.2 communication provides visibility into voltage, current, operating status, telemetry, and fault information in supported systems.
  • Advanced fan control adjusts cooling behavior according to system load and thermal conditions.
  • Reverse airflow support allows integration into front-to-back or back-to-front chassis cooling layouts.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, redundancy requirements, and system load before integration.

Installation / Operation Item Guidance
Load Planning Review total PoE budget, switch board demand, AI module load, fan power, and standby consumption before deployment
Chassis Fitment Confirm the 185 × 73.5 × 40 mm CRPS size before mechanical integration
Input Connection Use within the supported 90–264Vac or 180–300Vdc input range
PoE Voltage Check Confirm that the target platform is designed for a 54.5V main power input
Standby Power Check Verify that the system standby requirement matches the 3A 12V standby output
High-Density PoE Margin Leave practical headroom for device startup, port expansion, peak PoE draw, and fan speed changes
Airflow Direction Match standard or reverse airflow with the chassis cooling path
Monitoring Setup Use PMBus 1.2 where supported for telemetry, fault alerts, and maintenance visibility

FAQ

Frequently asked questions about G1482-1300WNA.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the G1482-1300WNA?

The G1482-1300WNA is a 1300W CRPS power supply designed for PoE networking, telecom infrastructure, AI-assisted network systems, and high-density edge applications.

What is the size of this model?

This model uses a compact 1U CRPS form factor with a size of 185 × 73.5 × 40 mm, making it suitable for dense network chassis and rack-mounted communication equipment.

What input voltage range does it support?

The G1482-1300WNA supports 90–264Vac AC input and 180–300Vdc DC input for flexible deployment across different infrastructure power environments.

Does the G1482-1300WNA support PMBus monitoring?

Yes. The unit supports PMBus 1.2, allowing compatible systems to monitor operating status, telemetry, voltage behavior, current conditions, and fault information.

Why is this model suitable for large PoE systems?

Its 54.5V main output at 23.85A provides higher power capacity for dense PoE switching platforms, connected-device networks, and high-load access infrastructure.

How does the 1300W rating help POP cloud clusters?

The 1300W output provides extra power margin for localized compute, caching, routing, security, and access services running together in compact POP infrastructure.

What makes this model different from lower-power G1482 versions?

Compared with 600W and 920W models, the G1482-1300WNA offers a larger 54.5V output budget, making it better suited for heavier PoE loads, telecom aggregation, and multi-service edge nodes.

What should be checked before integrating this PSU?

Confirm the 54.5V input requirement, total PoE power budget, connector compatibility, standby power demand, airflow direction, thermal clearance, and PMBus support before deployment.

KEEP EXPLORING

Related products

View category →