Get a quote
PRODUCT VIEW G1482-2000WNA product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

G1482-2000WNA

G1482

INQUIRY READY

G1482-2000WNA

Gospower / AC/DC Platinum / G1482

G1482-2000WNA brings together 2000W capacity for Po E Switches & Core Routers, Telecom Infrastructure, Al & Edge Infrastructure, and Data Center Security Systems, with an emphasis on an installation-ready choice for mission-critical equipment.

Output Power (W):
2000
Length (mm):
185
Width (mm):
73.5
Height (mm):
40
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The G1482-2000WNA is built for high-capacity PoE and telecommunications systems that require strong 54.5V output, compact CRPS integration, and stable continuous-duty performance. Its 2000W rating makes it suitable for heavy POP deployments, dense PoE switch platforms, telecom aggregation systems, network service racks, and large-scale connected-device infrastructure where uptime, power margin, and remote monitoring are essential. Before integration, confirm the connector mapping, chassis clearance, and supported input conditions against the target power shelf. For long-term service, document fan inspection, connector seating, event-log review, and replacement procedures as part of the maintenance plan. Commissioning should verify grounding, input protection, output stability, and the response of any redundant or hot-swap control logic.

Before integrating the G1482-2000WNA, confirm the mating connector or backplane, input source, output-rail requirements, hot-swap sequence, airflow direction, monitoring interface, redundancy behavior, and service clearance against the target platform.

CORE ADVANTAGES

2000W CRPS Power Supply Designed for PoE, Networking, and Telecommunications Equipment

2000W Power for Large PoE and Network Infrastructure The G1482-2000WNA is designed for high-capacity PoE switches, networking equipment, telecommunications systems, AI applications, and demanding enterprise infrastructure that require strong 2000W power delivery in a compact CRPS module.

01

2000W Power for Large PoE and Network Infrastructure The G1482-2000WNA is designed for high-capacity PoE switches, networking equipment, telecommunications systems, AI applications, and demanding enterprise infrastructure that require strong 2000W power delivery in a compact CRPS module.

02

Compact 1U CRPS Mechanical Design With a 185 × 73.5 × 40 mm form factor, this model supports dense system environments, modular network chassis, telecom cabinets, and rack-mounted platforms where space efficiency is critical.

03

Wide AC and DC Input Compatibility It supports 90–264Vac AC input and 180–300Vdc DC input, allowing flexible deployment across data centers, telecom rooms, enterprise networks, edge sites, and global infrastructure environments.

04

54.5V Main Output for Heavy PoE Loads The unit provides a 54.5V main output at 36.7A together with a 12V standby output at 3A, supporting high-power PoE distribution, switching boards, telecom modules, management logic, and auxiliary control circuits.

05

Digital Control with PMBus Monitoring With full digital control and PMBus 1.2 support, the G1482-2000WNA enables compatible systems to monitor operating status, telemetry, voltage behavior, current conditions, and fault information.

06

Built for Demanding Enterprise Operation Platinum-level efficiency, active PFC, smart fan control, reverse airflow support, and global safety and EMC compliance options help this model maintain reliable performance in high-load PoE, networking, and telecommunications environments.

MODEL SELECTION

Compare Gospower power options.

Review nearby Gospower models and select the power level, output architecture, efficiency grade, and form factor that best match the target system.

Model Power Output Current Efficiency Form Factor Recommended Use
G1482-0600WNA 600w 12V Platinum CRPS SD-WAN gateways and compact edge storage
G1482-0920WNA 920w 12V Platinum CRPS Multi-radio access systems and cache servers
G1482-1300WNA 1300w 12V Platinum CRPS POP compute nodes and cloud service clusters
G1482-1600WNA 1600w 12V Platinum CRPS Multi-tenant edge platforms and AI gateways
G1482-2000WNA 2000w 12V Platinum CRPS Data center edge racks and large POP deployments

DEPLOYMENT SCENARIOS

Where G1482-2000WNA fits best.

The G1482-2000WNA is built for high-capacity PoE and telecommunications systems that require strong 54.5V output, compact CRPS integration, and stable continuous-duty performance. Its 2000W rating makes it suitable for heavy POP deployments, dense PoE switch platforms, telecom aggregation systems, network service racks, and large-scale connected-device infrastructure where uptime, power margin, and remote monitoring are essential.

Scenario System Requirement Why G1482-2000WNA Fits
Dense PoE Switch Platforms Stable power for high-port PoE delivery, switch boards, fans, and management modules 54.5V output at 36.7A supports very large PoE power budgets
Heavy POP Deployments Continuous power for routing, switching, access, caching, and local service systems 2000W capacity supports multiple network functions in compact infrastructure
Telecom Aggregation Systems Reliable output for communication modules, interface cards, and control hardware Wide AC/DC input supports varied telecom and distributed site power conditions
Network Service Racks Power support for security, SD-WAN, routing, monitoring, and application delivery Strong output supports mixed service demand in rack-mounted environments
AI-Enabled Network Infrastructure Stable power for traffic analysis, smart gateways, and local inference systems High power headroom supports intelligent network workloads and auxiliary devices
Large Connected-Device Networks Power support for access points, cameras, controllers, gateways, and field devices 54.5V architecture fits high-density PoE-based campus and enterprise systems

POWER DESIGN

Reliability notes for continuous operation.

The G1482-2000WNA is designed for high-load PoE, telecom, and network infrastructure where strong output capacity, digital power visibility, and compact serviceability are important. Its 2000W rating and 54.5V main output provide substantial operating margin for large connected-device networks, POP infrastructure, and telecommunications platforms.

  • 2000W output capacity supports dense PoE switches, heavy POP deployments, telecom aggregation systems, network service racks, and AI-enabled network infrastructure.
  • 54.5V main output at 36.7A supports high-capacity PoE power distribution for access, switching, communication, and connected-device systems.
  • 12V standby output at 3A supports management boards, standby operation, control logic, monitoring circuits, and auxiliary platform functions.
  • Active PFC helps improve input power quality and supports efficient conversion across different AC operating conditions.
  • Wide AC/DC input compatibility allows deployment in telecom rooms, data centers, enterprise networks, edge sites, and global infrastructure environments.
  • PMBus 1.2 communication provides visibility into voltage, current, operating status, telemetry, and fault information in supported systems.
  • Smart fan control adjusts cooling behavior according to system load and thermal conditions.
  • Reverse airflow support allows integration into different chassis orientations and front-to-back or back-to-front cooling layouts.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, redundancy requirements, and system load before integration.

Installation / Operation Item Guidance
Load Planning Review total PoE budget, switch board demand, telecom module load, fan power, and standby consumption before deployment
Chassis Fitment Confirm the 185 × 73.5 × 40 mm CRPS size before mechanical integration
Input Connection Use within the supported 90–264Vac or 180–300Vdc input range
PoE Voltage Check Confirm that the target platform is designed for a 54.5V main power input
Standby Power Check Verify that the system standby requirement matches the 3A 12V standby output
High-Capacity PoE Margin Leave practical headroom for device startup, port expansion, peak PoE draw, and cooling demand
Airflow Direction Match standard or reverse airflow with the chassis cooling path
Monitoring Setup Use PMBus 1.2 where supported for telemetry, fault alerts, and maintenance visibility

FAQ

Frequently asked questions about G1482-2000WNA.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the G1482-2000WNA?

The G1482-2000WNA is a 2000W CRPS power supply designed for PoE networking, telecommunications equipment, network service racks, and demanding enterprise infrastructure.

What is the size of this model?

This model uses a compact 1U CRPS form factor with a size of 185 × 73.5 × 40 mm, making it suitable for dense network chassis and rack-mounted communication systems.

What input voltage range does it support?

The G1482-2000WNA supports 90–264Vac AC input and 180–300Vdc DC input for flexible deployment across different infrastructure power environments.

Does the G1482-2000WNA support PMBus monitoring?

Yes. The unit supports PMBus 1.2, allowing compatible systems to monitor operating status, telemetry, voltage behavior, current conditions, and fault information.

Why is this model suitable for large PoE deployments?

Its 54.5V main output at 36.7A provides a large power budget for high-port PoE switches, connected-device networks, access systems, and dense enterprise infrastructure.

How does the 2000W rating help POP and telecom systems?

The 2000W rating provides strong operating margin for routing, switching, access equipment, telecom modules, local services, cooling fans, and management boards working together.

What makes this model different from lower-power G1482 versions?

Compared with 600W, 920W, 1300W, and 1600W versions, the G1482-2000WNA offers the highest output capacity in this group, making it better suited for heavy PoE loads and large infrastructure rollouts.

What should be checked before integrating this PSU?

Confirm the 54.5V input requirement, total PoE power budget, connector compatibility, standby power demand, airflow direction, thermal clearance, and PMBus support before deployment.

KEEP EXPLORING

Related products

View category →