Get a quote
PRODUCT VIEW G1482-0920WNA product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

G1482-0920WNA

G1482

INQUIRY READY

G1482-0920WNA

Gospower / AC/DC Platinum / G1482

G1482-0920WNA matches PoE, Telecom, and AI Applications with 920W capacity, helping operators achieve clear headroom for sustained real-world workloads.

Output Power (W):
920
Length (mm):
185
Width (mm):
73.5
Height (mm):
40
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The G1482-0920WNA is suitable for PoE and telecom-focused platforms that require higher 54.5V output capacity than mid-range models while still maintaining compact CRPS integration. Its 920W output makes it a strong fit for high-power PoE switches, telecom access systems, AI network nodes, cache servers, and multi-radio infrastructure where uptime, power headroom, and remote monitoring are important. Installation planning should account for ambient temperature, pressure drop, service access, and the electrical limits of the surrounding platform. System validation should cover standby behavior, load transitions, protection recovery, and monitoring compatibility under expected operating conditions. Allow practical headroom for startup demand and transient loads, while keeping intake and exhaust paths clear throughout continuous operation. Before integration, confirm the connector mapping, chassis clearance, and supported input conditions against the target power shelf.

Before integrating the G1482-0920WNA, confirm the mating connector or backplane, input source, output-rail requirements, hot-swap sequence, airflow direction, monitoring interface, redundancy behavior, and service clearance against the target platform.

CORE ADVANTAGES

920W CRPS Power Supply for PoE, Telecom, and AI Applications

920W Power for PoE and Intelligent Network Loads The G1482-0920WNA is designed for PoE switches, telecom infrastructure, intelligent networking hardware, and AI computing platforms that require stronger 920W power delivery in a compact CRPS power module.

01

920W Power for PoE and Intelligent Network Loads The G1482-0920WNA is designed for PoE switches, telecom infrastructure, intelligent networking hardware, and AI computing platforms that require stronger 920W power delivery in a compact CRPS power module.

02

Compact 1U CRPS Mechanical Design With a 185 × 73.5 × 40 mm form factor, this model supports high-density network chassis, telecom systems, edge cabinets, and rack-mounted infrastructure where space efficiency is important.

03

Wide AC and DC Input Compatibility It supports 90–264Vac AC input and 180–300Vdc DC input, allowing flexible deployment across enterprise networks, telecom rooms, edge sites, data facilities, and global power environments.

04

54.5V Main Output for Higher PoE Budgets The unit provides a 54.5V main output at 16.88A together with a 12V standby output at 3A, supporting PoE power distribution, network control boards, access equipment, and auxiliary system logic.

05

Digital Control with PMBus Visibility With full digital control and PMBus 1.2 support, the G1482-0920WNA enables compatible systems to monitor operating status, telemetry, voltage behavior, and fault information.

06

Built for Efficient Continuous Operation Platinum efficiency, active PFC, smart fan control, reverse airflow availability, and global compliance support help this model maintain stable output and controlled thermal performance in demanding PoE and AI network environments.

MODEL SELECTION

Compare Gospower power options.

Review nearby Gospower models and select the power level, output architecture, efficiency grade, and form factor that best match the target system.

Model Power Output Current Efficiency Form Factor Recommended Use
G1482-0600WNA 600w 12V Platinum CRPS SD-WAN gateways and compact edge storage
G1482-0920WNA 920w 12V Platinum CRPS Multi-radio access systems and cache servers
G1482-1300WNA 1300w 12V Platinum CRPS POP compute nodes and cloud service clusters
G1482-1600WNA 1600w 12V Platinum CRPS Multi-tenant edge platforms and AI gateways
G1482-2000WNA 2000w 12V Platinum CRPS Data center edge racks and large POP deployments

DEPLOYMENT SCENARIOS

Where G1482-0920WNA fits best.

The G1482-0920WNA is suitable for PoE and telecom-focused platforms that require higher 54.5V output capacity than mid-range models while still maintaining compact CRPS integration. Its 920W output makes it a strong fit for high-power PoE switches, telecom access systems, AI network nodes, cache servers, and multi-radio infrastructure where uptime, power headroom, and remote monitoring are important.

Scenario System Requirement Why G1482-0920WNA Fits
High-Power PoE Switches Stable power for multiple PoE ports, switching boards, and cooling systems 54.5V output at 16.88A supports higher PoE power budgets
Telecom Access Platforms Continuous operation for communication hardware, interface cards, and control modules Wide AC/DC input supports varied telecom and field power environments
Multi-Radio Network Systems Reliable power for wireless access, backhaul, routing, and management hardware 920W capacity provides headroom for radio-heavy network platforms
Edge Cache Servers Power support for storage, network interfaces, processors, and fans Strong output supports local caching and edge traffic handling
AI Network Nodes Compact power for intelligent routing, inference, and traffic analysis systems 54.5V architecture and PMBus visibility support managed AI-network equipment
Distributed POP Infrastructure Serviceable power for remote network sites and compact infrastructure racks CRPS design and reverse airflow flexibility support constrained deployments

POWER DESIGN

Reliability notes for continuous operation.

The G1482-0920WNA is built for PoE networking and telecom infrastructure where higher 54.5V power capacity, digital visibility, and continuous-duty stability are important. Its 920W power rating gives system designers more operating margin for dense PoE loads, multi-radio systems, local cache equipment, and intelligent network platforms.

  • 920W output capacity supports high-power PoE switches, telecom access systems, multi-radio platforms, edge cache servers, and AI network nodes.
  • 54.5V main output at 16.88A supports PoE-oriented power distribution for network switching, communication, and connected-device infrastructure.
  • 12V standby output at 3A supports control boards, standby operation, management logic, and auxiliary system circuits.
  • Active PFC helps improve input power quality and supports efficient conversion across different AC operating conditions.
  • Wide AC/DC input compatibility allows deployment in enterprise networks, telecom rooms, edge cabinets, distributed POP sites, and global infrastructure environments.
  • PMBus 1.2 communication provides visibility into operating status, telemetry, voltage behavior, and fault information in supported systems.
  • Smart fan control adjusts cooling behavior according to system load and thermal demand.
  • Reverse airflow availability supports different chassis cooling layouts and front-to-back or back-to-front rack airflow paths.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, redundancy requirements, and system load before integration.

Installation / Operation Item Guidance
Load Planning Review total PoE budget, radio module demand, switching board load, fan power, and standby consumption before deployment
Chassis Fitment Confirm the 185 × 73.5 × 40 mm CRPS size before mechanical integration
Input Connection Use within the supported 90–264Vac or 180–300Vdc input range
PoE Voltage Check Confirm that the target platform is designed for a 54.5V main power input
Standby Power Check Verify that the system standby requirement matches the 3A 12V standby output
High-Power PoE Margin Leave practical headroom for port expansion, radio activity, device startup, and peak PoE draw
Airflow Direction Match standard or reverse airflow with the chassis cooling path
Monitoring Setup Use PMBus 1.2 where supported for telemetry, fault alerts, and maintenance visibility

FAQ

Frequently asked questions about G1482-0920WNA.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the G1482-0920WNA?

The G1482-0920WNA is a 920W CRPS power supply designed for PoE systems, telecom infrastructure, intelligent network hardware, and AI-related edge applications.

What is the size of this model?

This model uses a compact 1U CRPS form factor with a size of 185 × 73.5 × 40 mm, making it suitable for dense network chassis and rack-mounted communication equipment.

What input voltage range does it support?

The G1482-0920WNA supports 90–264Vac AC input and 180–300Vdc DC input for flexible deployment across different infrastructure power environments.

Does the G1482-0920WNA support PMBus monitoring?

Yes. The unit supports PMBus 1.2, allowing compatible systems to monitor operating status, telemetry, voltage behavior, and fault information.

What makes this model suitable for high-power PoE switches?

Its 54.5V main output at 16.88A provides a stronger PoE-oriented power budget than lower-wattage models, making it suitable for higher-port or higher-load PoE switch platforms.

How does the 920W rating help multi-radio network systems?

The 920W capacity provides additional headroom for wireless radios, access modules, backhaul interfaces, control boards, and cooling demand in telecom or distributed network systems.

Can this model be used in edge cache or POP infrastructure?

Yes. Its compact CRPS size, 54.5V output, wide input range, and PMBus visibility make it suitable for edge cache servers, distributed POP cabinets, and compact network infrastructure.

What should be checked before integrating this PSU?

Confirm the 54.5V input requirement, total PoE budget, standby power demand, connector compatibility, airflow direction, thermal clearance, and PMBus support before deployment.

KEEP EXPLORING

Related products

View category →