Get a quote
PRODUCT VIEW GW-GSP100W-48 product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

GW-GSP100W-48

GSP series

INQUIRY READY

GW-GSP100W-48

Greatwall / Industrial Power Supply / GSP series

GW-GSP100W-48 focuses on Telecom Access, Industrial Networking, Remote Communication, and Distributed DC Systems, where a design centered on 100.8W capacity and natural convection supports steady operation across always-on infrastructure.

Model
GW-GSP100W-48
Rated Output Power
100.8W
AC Input Voltage
90–264Vac
DC Output Voltage
48V
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The GW-GSP100W-48 is designed for systems requiring a regulated 48V DC supply with compact dimensions and fanless operation. Its active PFC, dual isolated outputs, screw-terminal connection, and wide operating-temperature range make it suitable for telecom, networking, remote infrastructure, and distributed power applications. For this 100.8W capacity, commissioning should verify grounding, input protection, output stability, and the response of any redundant or hot-swap control logic.

Plan the GW-GSP100W-48 output wiring around the actual current demand: keep conductors short, use low-resistance terminations, separate power paths from sensitive signal wiring, and preserve access for retightening and inspection. Arrange the enclosure so heat from neighboring components cannot collect around the supply or its connection points.

Qualify the GW-GSP100W-48 at several load levels, measuring voltage at both the supply terminals and the equipment input rather than relying only on no-load readings. Record cable drop, connector temperature, and enclosure temperature as baseline values. Later maintenance checks can compare against this record to identify loose joints, rising contact resistance, or deteriorating heat dissipation before they interrupt service.

CORE ADVANTAGES

100.8W 48V Enclosed AC-DC Power Supply for Telecom Access, Industrial Networking, Remote Communication, and Distributed DC Systems

The GW-GSP100W-48 delivers up to 100.8W output power for telecom access equipment, industrial network devices, remote communication systems, distributed DC platforms, and other applications requiring a dependable 48V power source.

01

100.8W Stable DC Power Capacity

The GW-GSP100W-48 delivers up to 100.8W output power for telecom access equipment, industrial network devices, remote communication systems, distributed DC platforms, and other applications requiring a dependable 48V power source.

02

Compact 159 × 97 × 30 mm Enclosed Structure

Built in a compact 159 × 97 × 30 mm metal enclosure , this model is suitable for installation inside communication cabinets, network appliances, roadside equipment, embedded platforms, and other systems where mounting space is limited.

03

Universal 90–264Vac Input Compatibility

It supports a wide 90–264Vac input range , enabling reliable operation across different regional power grids without manual voltage selection and simplifying international equipment integration.

04

Stable 48V / 2.1A Output Performance

The unit provides a regulated 48V DC output at up to 2.1A , making it suitable for telecom modules, industrial Ethernet devices, remote communication terminals, distributed power equipment, and other systems designed around a 48V DC rail.

05

Active PFC with Dual Isolated DC Outputs

Built-in active PFC improves input power utilization, while the dual isolated DC output design supports equipment requiring electrically separated output paths within one integrated power platform.

06

Natural Cooling and Reliable Protection Design

With natural-convection cooling , efficiency of up to 90% , a -30°C to +70°C operating temperature range , 4242Vdc isolation, low-ripple output, and short-circuit, overcurrent, overvoltage, and overtemperature protection, this model supports dependable continuous operation.

MODEL SELECTION

Compare Greatwall industrial power options.

Review nearby Greatwall models and select the output voltage, power level, and integration profile that best match the target system.

Model Output Voltage Rated Current Rated Power Best-Fit Application
GW-GSP100W-5 5Vdc 20A 100W High-current embedded boards, LED control electronics, industrial interfaces, and low-voltage power systems
GW-GSP100W-12 12Vdc 8.3A 100W Communication devices, security equipment, embedded computers, and general-purpose 12V electronics
GW-GSP100W-15 15Vdc 6.7A 100W Test instruments, signal-processing equipment, specialized controllers, and dedicated 15V circuits
GW-GSP100W-24 24Vdc 4.2A 100W PLC systems, sensors, relays, actuators, and industrial automation equipment
GW-GSP100W-27 27Vdc 3.7A 100W RF modules, communication terminals, monitoring devices, and specialized 27V electronics
GW-GSP100W-48 48Vdc 2.1A 100W Telecom equipment, industrial gateways, distributed DC systems, and network infrastructure

DEPLOYMENT SCENARIOS

Where GW-GSP100W-48 fits best.

The GW-GSP100W-48 is designed for systems requiring a regulated 48V DC supply with compact dimensions and fanless operation. Its active PFC, dual isolated outputs, screw-terminal connection, and wide operating-temperature range make it suitable for telecom, networking, remote infrastructure, and distributed power applications.

Deployment Scenario Application Description
Telecom Access Equipment Powers access nodes, transmission interfaces, radio controllers, and compact telecom electronics
Industrial Ethernet Systems Supports managed switches, industrial gateways, protocol converters, and network-control devices
Remote Communication Cabinets Supplies stable power to roadside communication units, field terminals, and remote infrastructure electronics
Distributed 48V Platforms Functions as a local AC-DC source for equipment distributing regulated 48V power to downstream modules
Monitoring and Data Systems Powers remote data-acquisition devices, supervision controllers, and communication-enabled monitoring equipment
Dual-Output Electronic Systems Supports equipment requiring two electrically isolated 48V output paths within one integrated platform

POWER DESIGN

Reliability notes for continuous operation.

The GW-GSP100W-48 uses an active-PFC input stage and a single-ended flyback conversion topology to convert universal AC input into a regulated 48V DC output. Its natural-convection cooling design eliminates the need for an integrated fan, helping reduce acoustic noise and mechanical maintenance requirements.

  • The dual isolated DC output structure supports systems requiring electrical separation between output paths. Because the supplied information does not specify the individual current allocation for each isolated output, channel-level loading should be confirmed before final system integration.
  • Key reliability features include:
  • · Active PFC with single-ended flyback conversion
  • · Dual isolated DC output architecture
  • · Natural-convection fanless cooling
  • · Up to 90% conversion efficiency
  • · Low-ripple and low-noise regulated 48V output
  • · Adjustable output voltage with LED status indication
  • · Comprehensive SCP, OCP, OVP, and OTP protection
  • · 100% high-temperature burn-in and 5G vibration testing
  • · Conformal-coated PCB with operation support up to 5,000 meters
  • · Design aligned with IEC, EN, and UL 62368 safety requirements

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, and system load before integration.

Item Installation Recommendation
AC Input Connection Confirm the live, neutral, and protective-earth terminals before applying power
DC Output Connection Verify the polarity and function of both isolated output paths before connecting loads
Cable Selection Use output wiring capable of safely carrying the required current, up to the full 2.1A rating
Screw-Terminal Tightening Tighten all terminals securely to reduce contact resistance and localized overheating
Grounding Connect the protective-earth terminal to a reliable equipment ground
Natural Cooling Install the unit where air can circulate freely through and around the enclosure
Installation Clearance Keep sufficient distance from heat sources, solid panels, and airflow obstructions
Output Adjustment Use a calibrated multimeter when making minor output-voltage adjustments
Load Capacity Keep the combined continuous load within the rated 100.8W output limit
Output Allocation Confirm the permitted current distribution between the two isolated DC outputs
Long Cable Runs Consider conductor size and cable resistance when distributing 48V power over longer distances
Maintenance Disconnect the AC input and allow stored energy to discharge before servicing

FAQ

Frequently asked questions about GW-GSP100W-48.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the GW-GSP100W-48?

The GW-GSP100W-48 is an enclosed AC-DC switching power supply with active PFC, natural-convection cooling, screw-terminal connections, and dual isolated DC outputs.

What are the dimensions of the GW-GSP100W-48?

Its external dimensions are approximately 159 × 97 × 30 mm.

What input-voltage range does it support?

It supports a universal AC input range of 90–264Vac.

What are its rated output voltage, current, and power?

The unit provides 48V DC, a maximum output current of 2.1A, and a rated output power of 100.8W.

Does the GW-GSP100W-48 require a cooling fan?

No. It uses natural-convection cooling. Adequate clearance and surrounding airflow are still required for reliable heat dissipation.

What is the purpose of the dual isolated DC outputs?

They support equipment requiring two electrically separated 48V output paths. The permitted current allocation between the outputs should be confirmed before integration.

What protection functions are included?

The power supply includes short-circuit, overcurrent, overvoltage, and overtemperature protection.

What applications are best suited to this model?

It is suitable for telecom access equipment, industrial Ethernet systems, remote communication cabinets, distributed 48V platforms, monitoring devices, and other systems requiring a regulated 48V supply.

KEEP EXPLORING

Related products

View category →