Get a quote
PRODUCT VIEW G1317-0600WNA product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

G1317-0600WNA

G1317

INQUIRY READY

G1317-0600WNA

Gospower / AC/DC Platinum / G1317

G1317-0600WNA gives Compact Edge Nodes, Industrial Controllers, Lightweight Network Systems, and Distributed Infrastructure a power platform built around 600W capacity. It is intended for stable service across demanding field environments.

Output Power (W):
600
Length (mm):
185
Width (mm):
73.5
Height (mm):
40
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The G1317-0600WNA is suitable for compact DC-powered infrastructure where stable 54.5V output, small CRPS integration, and service-friendly operation are important. Its 600W capacity makes it a practical fit for edge nodes, industrial controllers, PoE subsystems, telecom cabinets, and lightweight network systems that need dependable power in constrained spaces. Backplane pinout, control signaling, and mechanical retention should be checked together before the unit is approved for production use. Installation planning should account for ambient temperature, pressure drop, service access, and the electrical limits of the surrounding platform. System validation should cover standby behavior, load transitions, protection recovery, and monitoring compatibility under expected operating conditions.

Before integrating the G1317-0600WNA, confirm the mating connector or backplane, input source, output-rail requirements, hot-swap sequence, airflow direction, monitoring interface, redundancy behavior, and service clearance against the target platform.

CORE ADVANTAGES

600W CRPS Power Supply for Compact Edge Nodes, Industrial Controllers, and Lightweight Network Systems

600W Power for Edge and Industrial Systems The G1317-0600WNA is designed for compact edge nodes, industrial control platforms, lightweight network systems, and distributed infrastructure that require stable 600W power delivery in a small CRPS power module.

01

600W Power for Edge and Industrial Systems The G1317-0600WNA is designed for compact edge nodes, industrial control platforms, lightweight network systems, and distributed infrastructure that require stable 600W power delivery in a small CRPS power module.

02

Compact 1U CRPS Mechanical Design With a 185 × 73.5 × 40 mm form factor, this model supports space-restricted enclosures, edge cabinets, industrial chassis, and compact network platforms where installation space is limited.

03

54.5V Main Output for PoE-Oriented Subsystems The unit provides a 54.5V main output at 11A, supporting PoE-driven subsystems, embedded networking boards, control modules, communication devices, and distributed edge hardware.

04

Designed for +48Vdc Power Architecture Its +48Vdc input design makes it suitable for telecom racks, edge cabinets, industrial DC power systems, and infrastructure environments that rely on DC power distribution.

05

PMBus 1.2 Digital Management With PMBus 1.2 digital management, the G1317-0600WNA enables compatible systems to monitor operating parameters, support diagnostics, and improve visibility for managed infrastructure.

06

Built for Serviceable Continuous Operation Intelligent fan modulation, optimized electrical design, and hot-swap support help this model maintain stable operation while simplifying maintenance in live edge, telecom, and industrial systems.

MODEL SELECTION

Compare Gospower power options.

Review nearby Gospower models and select the power level, output architecture, efficiency grade, and form factor that best match the target system.

Model Power Output Current Efficiency Form Factor Recommended Use
G1317-0600WNA 600w 12V Platinum CRPS Entry edge servers and compact AI nodes
G1317-0920WNA 920w 12V Platinum CRPS Hybrid storage nodes and virtualization hosts
G1317-1200WNA 1200w 12V Platinum CRPS AI-ready compute systems and service platforms
G1317-1600WNA 1600w 12V Platinum CRPS High-concurrency AI servers and dense compute racks

DEPLOYMENT SCENARIOS

Where G1317-0600WNA fits best.

The G1317-0600WNA is suitable for compact DC-powered infrastructure where stable 54.5V output, small CRPS integration, and service-friendly operation are important. Its 600W capacity makes it a practical fit for edge nodes, industrial controllers, PoE subsystems, telecom cabinets, and lightweight network systems that need dependable power in constrained spaces.

Scenario System Requirement Why G1317-0600WNA Fits
Compact Edge Nodes Stable power for local compute, network interfaces, and control logic 600W output supports distributed edge workloads in a compact CRPS format
Industrial Controllers Reliable power for control boards, I/O modules, communication cards, and fans Optimized electrical design supports fluctuating industrial load behavior
PoE Subsystems Higher-voltage output for PoE-driven boards and connected-device infrastructure 54.5V main output supports PoE-oriented power architecture
Telecom Edge Cabinets DC-compatible power for remote communication equipment and cabinet systems +48Vdc input design fits telecom and distributed DC power environments
Lightweight Network Systems Power support for gateways, access hardware, and embedded networking boards Compact 1U structure fits small networking and control enclosures
Live-Service Infrastructure Field maintenance without full system shutdown Hot-swap support simplifies replacement in active systems

POWER DESIGN

Reliability notes for continuous operation.

The G1317-0600WNA is built for compact edge, industrial, and telecom-related systems where DC power compatibility, stable 54.5V output, and serviceability are more important than oversized server wattage. Its 600W rating provides practical power support for PoE-oriented subsystems, embedded networking hardware, and distributed control platforms.

  • 600W output capacity supports compact edge nodes, industrial controllers, telecom cabinets, PoE subsystems, and lightweight network systems.
  • 54.5V main output at 11A supports PoE-driven subsystems, embedded networking boards, communication devices, and distributed edge equipment.
  • 1U CRPS size supports compact integration in space-limited cabinets, edge enclosures, industrial chassis, and modular network hardware.
  • +48Vdc input architecture supports telecom racks, DC-powered edge cabinets, and industrial power distribution environments.
  • PMBus 1.2 management provides visibility into operating parameters, diagnostics, and system-level power behavior in supported platforms.
  • Intelligent fan modulation adjusts cooling behavior according to system load and thermal conditions.
  • Optimized electrical design helps support stable operation across changing edge and industrial workloads.
  • Hot-swap support allows power module replacement in live systems where service continuity matters.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, redundancy requirements, and system load before integration.

Installation / Operation Item Guidance
Load Planning Review PoE subsystem demand, control board load, network module power, fan demand, and standby requirements before deployment
Chassis Fitment Confirm the 185 × 73.5 × 40 mm CRPS size before mechanical integration
DC Input Check Confirm that the target system is designed for the required +48Vdc input architecture
Output Compatibility Verify that the platform supports a 54.5V main power input
Hot-Swap Handling Ensure the module is fully seated with the connector before live system operation
Thermal Clearance Keep intake and exhaust areas open to prevent heat buildup in compact enclosures
Monitoring Setup Use PMBus 1.2 where supported for operating visibility, diagnostics, and maintenance tracking
Service Inspection Check fan operation, dust accumulation, connector condition, and airflow path during regular maintenance

FAQ

Frequently asked questions about G1317-0600WNA.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the G1317-0600WNA?

The G1317-0600WNA is a 600W CRPS power supply designed for compact edge nodes, industrial controllers, lightweight network systems, and DC-powered infrastructure.

What is the size of this model?

This model uses a compact 1U CRPS form factor with a size of 185 × 73.5 × 40 mm, making it suitable for space-restricted enclosures and compact chassis designs.

Does the G1317-0600WNA support PMBus monitoring?

Yes. The unit supports PMBus 1.2, allowing compatible systems to monitor operating parameters, diagnostics, and power status information.

What output does the G1317-0600WNA provide?

It provides a 54.5V main output at 11A, making it suitable for PoE-oriented subsystems, embedded networking boards, and distributed power architectures.

Why is the +48Vdc input design important?

The +48Vdc input design makes this model suitable for telecom racks, edge cabinets, industrial DC systems, and infrastructure environments that rely on DC power distribution.

Is this model suitable for industrial control platforms?

Yes. Its compact size, stable 54.5V output, intelligent cooling, and DC power compatibility make it suitable for industrial controllers and control-oriented network hardware.

How does hot-swap support help in edge deployments?

Hot-swap support allows the power module to be replaced more easily in live systems, helping reduce maintenance disruption in remote edge cabinets and distributed infrastructure.

What should be checked before integrating this PSU?

Confirm the +48Vdc input design, 54.5V output requirement, connector compatibility, airflow path, chassis fitment, hot-swap handling, and PMBus support before deployment.

KEEP EXPLORING

Related products

View category →