Get a quote
PRODUCT VIEW G1317-1200WNA product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

G1317-1200WNA

G1317

INQUIRY READY

G1317-1200WNA

Gospower / AC/DC Platinum / G1317

G1317-1200WNA is a specialized choice for Telecom Servers, Edge Computing Nodes, Distributed Network Equipment, and Outdoor/Remote Installations; 1200W capacity underpins predictable operation in continuous-duty installations.

Output Power (W):
1200
Length (mm):
185
Width (mm):
73.5
Height (mm):
40
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The G1317-1200WNA is suitable for DC-powered telecom, edge, and distributed network platforms that need stronger 54.5V output capacity than mid-range models while keeping a compact CRPS footprint. Its 1200W capacity makes it a practical fit for telecom servers, edge compute nodes, distributed network equipment, PoE-oriented systems, and carrier-grade cabinets where uptime, thermal control, and remote visibility are essential. Before integration, confirm the connector mapping, chassis clearance, and supported input conditions against the target power shelf. For long-term service, document fan inspection, connector seating, event-log review, and replacement procedures as part of the maintenance plan.

Before integrating the G1317-1200WNA, confirm the mating connector or backplane, input source, output-rail requirements, hot-swap sequence, airflow direction, monitoring interface, redundancy behavior, and service clearance against the target platform.

CORE ADVANTAGES

1200W CRPS Power Supply for Telecom Servers, Edge Computing Nodes, and Distributed Network Equipment

1200W Power for Telecom and Edge Systems The G1317-1200WNA is designed for telecom servers, edge computing nodes, distributed network equipment, and carrier-grade infrastructure that require stable 1200W power delivery in a compact CRPS module.

01

1200W Power for Telecom and Edge Systems The G1317-1200WNA is designed for telecom servers, edge computing nodes, distributed network equipment, and carrier-grade infrastructure that require stable 1200W power delivery in a compact CRPS module.

02

Compact 1U CRPS Mechanical Design With a 185 × 73.5 × 40 mm form factor, this model supports modular rack systems, telecom cabinets, edge enclosures, and space-limited infrastructure where power density and service access are important.

03

54.5V Main Output for PoE-Driven Architectures The unit provides a 54.5V main output at 22A together with a 12V standby output at 3A, supporting PoE-driven systems, network processors, communication boards, compute hardware, and control logic.

04

Designed for +48Vdc Input Infrastructure Its +48Vdc input design makes it suitable for telecom racks, carrier-grade installations, remote cabinets, outdoor edge nodes, and distributed DC-powered network environments.

05

PMBus 1.2 for Remote Power Management With PMBus 1.2 support, the G1317-1200WNA enables compatible systems to monitor power status, telemetry, fault conditions, and remote configuration for managed infrastructure operation.

06

Built for High-Efficiency Continuous Deployment High-efficiency power conversion, adaptive fan control, reverse-airflow availability, and compact CRPS serviceability help this model reduce heat generation and support long-term operation in tightly packed telecom and edge systems.

MODEL SELECTION

Compare Gospower power options.

Review nearby Gospower models and select the power level, output architecture, efficiency grade, and form factor that best match the target system.

Model Power Output Current Efficiency Form Factor Recommended Use
G1317-0600WNA 600w 12V Platinum CRPS Entry edge servers and compact AI nodes
G1317-0920WNA 920w 12V Platinum CRPS Hybrid storage nodes and virtualization hosts
G1317-1200WNA 1200w 12V Platinum CRPS AI-ready compute systems and service platforms
G1317-1600WNA 1600w 12V Platinum CRPS High-concurrency AI servers and dense compute racks

DEPLOYMENT SCENARIOS

Where G1317-1200WNA fits best.

The G1317-1200WNA is suitable for DC-powered telecom, edge, and distributed network platforms that need stronger 54.5V output capacity than mid-range models while keeping a compact CRPS footprint. Its 1200W capacity makes it a practical fit for telecom servers, edge compute nodes, distributed network equipment, PoE-oriented systems, and carrier-grade cabinets where uptime, thermal control, and remote visibility are essential.

Scenario System Requirement Why G1317-1200WNA Fits
Telecom Servers Stable power for communication processors, interface modules, fans, and control boards 1200W output supports telecom workloads in compact rack systems
Edge Computing Nodes Power support for local compute, storage, network interfaces, and cooling systems Compact CRPS design fits space-limited edge cabinets and distributed deployments
Distributed Network Equipment Continuous output for access hardware, switching boards, and service modules 54.5V output supports network and PoE-oriented power architecture
Carrier-Grade Cabinets DC-compatible power for remote or outdoor infrastructure systems +48Vdc input design matches telecom and carrier deployment environments
PoE-Driven Systems Higher-voltage output for PoE subsystems and connected-device platforms 54.5V main rail supports power distribution for access and field devices
Remote Service Nodes Managed power for locations with limited maintenance access PMBus visibility and reverse airflow options support monitoring and service planning

POWER DESIGN

Reliability notes for continuous operation.

The G1317-1200WNA is built for telecom and edge infrastructure where DC input compatibility, stable 54.5V delivery, and compact serviceability matter. Its 1200W rating provides higher operating margin for carrier-grade cabinets, distributed compute nodes, and PoE-driven network equipment.

  • 1200W output capacity supports telecom servers, edge computing nodes, distributed network systems, carrier cabinets, and PoE-driven infrastructure.
  • 54.5V main output at 22A supports communication boards, network processors, PoE subsystems, compute modules, and distributed field equipment.
  • 12V standby output at 3A supports management logic, standby operation, monitoring circuits, and auxiliary system control.
  • +48Vdc input architecture supports telecom racks, DC-powered edge cabinets, remote sites, and carrier-grade infrastructure.
  • PMBus 1.2 communication provides visibility into power status, telemetry, operating parameters, and fault conditions in supported platforms.
  • High-efficiency conversion helps reduce thermal load in tightly packed cabinets and compact enclosures.
  • Adaptive fan control adjusts cooling performance according to thermal demand and system load.
  • Reverse-airflow availability supports front-to-back or back-to-front cooling layouts used in telecom and edge deployments.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, redundancy requirements, and system load before integration.

Installation / Operation Item Guidance
Load Planning Review telecom board demand, edge compute load, PoE subsystem power, fan demand, and standby consumption before deployment
Chassis Fitment Confirm the 185 × 73.5 × 40 mm CRPS size before mechanical integration
DC Input Check Confirm that the target platform is designed for +48Vdc input operation
Output Compatibility Verify that the system supports a 54.5V main power input
Standby Power Check Confirm that the platform standby requirement matches the 3A 12V standby output
Cabinet Cooling Leave sufficient clearance for intake and exhaust airflow in compact telecom or edge enclosures
Monitoring Setup Use PMBus 1.2 where supported for telemetry, fault alerts, remote configuration, and maintenance visibility
Service Inspection Inspect fan condition, connector seating, dust buildup, airflow direction, and hot-swap contact condition during regular maintenance

FAQ

Frequently asked questions about G1317-1200WNA.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the G1317-1200WNA?

The G1317-1200WNA is a 1200W CRPS power supply designed for telecom servers, edge computing nodes, distributed network equipment, and DC-powered infrastructure.

What is the size of this model?

This model uses a compact 1U CRPS form factor with a size of 185 × 73.5 × 40 mm, making it suitable for dense telecom cabinets, edge enclosures, and modular rack systems.

Does the G1317-1200WNA support PMBus monitoring?

Yes. The unit supports PMBus 1.2, allowing compatible systems to monitor power status, telemetry, operating parameters, fault information, and remote diagnostics.

What output does the G1317-1200WNA provide?

It provides a 54.5V main output at 22A and a 12V standby output at 3A for telecom systems, PoE-driven subsystems, edge compute hardware, and control logic.

Why is this model suitable for telecom server systems?

Its +48Vdc input design, 54.5V output, compact CRPS structure, and 1200W capacity make it suitable for telecom servers and carrier-grade infrastructure using DC power architecture.

How does this model support edge computing nodes?

The 1200W rating provides useful headroom for local processors, storage devices, network interfaces, fans, and management circuits in distributed edge deployments.

What role does reverse airflow play in this model?

Reverse airflow helps the PSU match alternative chassis cooling paths, which is useful in telecom cabinets, compact edge enclosures, and systems with front-to-back or back-to-front airflow requirements.

What should be checked before integrating this PSU?

Confirm the +48Vdc input requirement, 54.5V output compatibility, 12V standby demand, connector fit, airflow direction, chassis clearance, and PMBus support before deployment.

KEEP EXPLORING

Related products

View category →