Get a quote
PRODUCT VIEW G1317-1600WNA product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

G1317-1600WNA

G1317

INQUIRY READY

G1317-1600WNA

Gospower / AC/DC Platinum / G1317

G1317-1600WNA targets Telecom Infrastructure, Edge Computing Clusters, High-Density Network Platforms, and Remote Compute Nodes and uses 1600W capacity to maintain stable service across demanding field environments.

Output Power (W):
1600
Length (mm):
185
Width (mm):
73.5
Height (mm):
40
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The G1317-1600WNA is suitable for DC-powered telecom, edge, and high-density network platforms that require stronger 54.5V output capacity and compact CRPS integration. Its 1600W power rating makes it a strong fit for telecom infrastructure, edge computing clusters, high-concurrency network systems, PoE-driven platforms, and remote service nodes where uptime, power headroom, and thermal control are essential. Allow practical headroom for startup demand and transient loads, while keeping intake and exhaust paths clear throughout continuous operation. Before integration, confirm the connector mapping, chassis clearance, and supported input conditions against the target power shelf.

Before integrating the G1317-1600WNA, confirm the mating connector or backplane, input source, output-rail requirements, hot-swap sequence, airflow direction, monitoring interface, redundancy behavior, and service clearance against the target platform.

CORE ADVANTAGES

1600W CRPS Power Supply for Telecom Infrastructure, Edge Computing Clusters, and High-Density Network Platforms

1600W Power for Telecom and Edge Infrastructure The G1317-1600WNA is designed for telecom infrastructure, edge computing clusters, high-density network platforms, remote compute nodes, and distributed systems that require strong 1600W power delivery in a compact CRPS module.

01

1600W Power for Telecom and Edge Infrastructure The G1317-1600WNA is designed for telecom infrastructure, edge computing clusters, high-density network platforms, remote compute nodes, and distributed systems that require strong 1600W power delivery in a compact CRPS module.

02

Compact 1U CRPS Mechanical Design With a 185 × 73.5 × 40 mm form factor, this model supports dense rack deployments, telecom cabinets, edge enclosures, and modular network platforms where power density and service access are important.

03

54.5V Main Output for High-Load Systems The unit provides a 54.5V main output at 29.35A together with a 12V standby output at 3A, supporting PoE-driven environments, network processors, communication boards, compute hardware, and auxiliary control circuits.

04

Designed for +48Vdc Input Architecture Its +48Vdc input design makes it suitable for telecom base stations, carrier-grade cabinets, distributed edge sites, remote compute equipment, and DC-powered network infrastructure.

05

PMBus 1.2 for Remote Power Visibility With PMBus 1.2 support, the G1317-1600WNA enables compatible platforms to monitor power status, telemetry, fault information, health reporting, and remote management data.

06

Built for Dense, Continuous Operation High-efficiency conversion, intelligent fan control, reverse-airflow availability, and compact CRPS serviceability help this model support stable long-term operation in high-density telecom, edge, and networking environments.

MODEL SELECTION

Compare Gospower power options.

Review nearby Gospower models and select the power level, output architecture, efficiency grade, and form factor that best match the target system.

Model Power Output Current Efficiency Form Factor Recommended Use
G1317-0600WNA 600w 12V Platinum CRPS Entry edge servers and compact AI nodes
G1317-0920WNA 920w 12V Platinum CRPS Hybrid storage nodes and virtualization hosts
G1317-1200WNA 1200w 12V Platinum CRPS AI-ready compute systems and service platforms
G1317-1600WNA 1600w 12V Platinum CRPS High-concurrency AI servers and dense compute racks

DEPLOYMENT SCENARIOS

Where G1317-1600WNA fits best.

The G1317-1600WNA is suitable for DC-powered telecom, edge, and high-density network platforms that require stronger 54.5V output capacity and compact CRPS integration. Its 1600W power rating makes it a strong fit for telecom infrastructure, edge computing clusters, high-concurrency network systems, PoE-driven platforms, and remote service nodes where uptime, power headroom, and thermal control are essential.

Scenario System Requirement Why G1317-1600WNA Fits
Telecom Infrastructure Stable power for base-station equipment, access modules, control boards, and fans +48Vdc input design fits telecom power environments and carrier-grade cabinets
Edge Computing Clusters Power support for local compute, storage, network interfaces, and cooling systems 1600W output provides strong headroom for compact edge workloads
High-Density Network Platforms Continuous output for switching, routing, traffic processing, and service modules 54.5V main output supports high-load network and PoE-oriented architectures
Remote Compute Nodes Reliable power for distributed systems with limited maintenance access PMBus visibility supports remote diagnostics and managed operation
PoE-Driven Environments Higher-voltage output for connected-device infrastructure and access systems 54.5V output at 29.35A supports larger power distribution requirements
Dense Rack Deployments Compact power integration for space-constrained telecom and edge chassis 1U CRPS structure supports high power density without increasing footprint

POWER DESIGN

Reliability notes for continuous operation.

The G1317-1600WNA is built for telecom and edge infrastructure where +48Vdc input compatibility, strong 54.5V output, and compact serviceability are important. Its 1600W rating provides substantial operating margin for high-density network platforms, edge compute clusters, PoE-driven systems, and remote infrastructure cabinets.

  • 1600W output capacity supports telecom infrastructure, edge computing clusters, high-density network platforms, PoE-driven environments, and remote compute nodes.
  • 54.5V main output at 29.35A supports communication boards, network processors, PoE subsystems, compute hardware, fans, and distributed field equipment.
  • 12V standby output at 3A supports management logic, standby operation, monitoring circuits, and auxiliary system control.
  • +48Vdc input architecture supports telecom base stations, DC-powered edge cabinets, carrier-grade racks, and remote infrastructure environments.
  • PMBus 1.2 communication provides visibility into power status, telemetry, operating parameters, fault conditions, and health reporting in supported systems.
  • High-efficiency conversion helps reduce thermal stress in dense cabinets and tightly packed network systems.
  • Intelligent fan control adjusts cooling performance according to system load and thermal demand.
  • Reverse-airflow availability supports front-to-back or back-to-front cooling layouts used in telecom and edge deployments.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, redundancy requirements, and system load before integration.

Installation / Operation Item Guidance
Load Planning Review telecom module demand, edge compute load, PoE subsystem power, fan demand, and standby consumption before deployment
Chassis Fitment Confirm the 185 × 73.5 × 40 mm CRPS size before mechanical integration
DC Input Check Confirm that the target platform is designed for +48Vdc input operation
Output Compatibility Verify that the system supports a 54.5V main power input
Standby Power Check Confirm that the platform standby requirement matches the 3A 12V standby output
Dense Rack Cooling Keep intake and exhaust airflow paths clear in high-density cabinets and compact edge enclosures
Monitoring Setup Use PMBus 1.2 where supported for telemetry, fault alerts, health reporting, and remote maintenance visibility
Service Inspection Inspect fan condition, connector seating, dust buildup, airflow direction, and hot-swap contact condition during regular maintenance

FAQ

Frequently asked questions about G1317-1600WNA.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the G1317-1600WNA?

The G1317-1600WNA is a 1600W CRPS power supply designed for telecom infrastructure, edge computing clusters, high-density network platforms, and DC-powered distributed systems.

What is the size of this model?

This model uses a compact 1U CRPS form factor with a size of 185 × 73.5 × 40 mm, making it suitable for dense telecom cabinets, edge enclosures, and modular rack systems.

Does the G1317-1600WNA support PMBus monitoring?

Yes. The unit supports PMBus 1.2, allowing compatible systems to monitor power status, telemetry, operating parameters, fault information, and health reporting.

What output does the G1317-1600WNA provide?

It provides a 54.5V main output at 29.35A and a 12V standby output at 3A for telecom systems, PoE-driven platforms, edge compute hardware, and control logic.

Why is this model suitable for high-density telecom infrastructure?

Its +48Vdc input design, 1600W output, compact CRPS footprint, and 54.5V main rail make it suitable for telecom cabinets and carrier-grade systems with high power density requirements.

How does the 1600W rating help edge computing clusters?

The 1600W rating provides strong headroom for processors, storage devices, network interfaces, cooling fans, and auxiliary circuits operating together in compact edge systems.

What makes this model useful for remote or unmanned sites?

PMBus monitoring, stable DC input compatibility, reverse-airflow options, and hot-serviceable CRPS integration help support easier diagnostics and maintenance in remote infrastructure locations.

What should be checked before integrating this PSU?

Confirm the +48Vdc input requirement, 54.5V output compatibility, 12V standby demand, connector fit, airflow direction, chassis clearance, and PMBus support before deployment.

KEEP EXPLORING

Related products

View category →