Get a quote
PRODUCT VIEW G1482-1600WNA product image 1

Images are for reference only. Actual product appearance may vary.

01 / 06

G1482-1600WNA

G1482

INQUIRY READY

G1482-1600WNA

Gospower / AC/DC Platinum / G1482

G1482-1600WNA brings together 1600W capacity for PoE, Networking, Telecom, and AI Systems, with an emphasis on controlled delivery for equipment expected to run for long periods.

Output Power (W):
1600
Length (mm):
185
Width (mm):
73.5
Height (mm):
40
Request a Quote ↗

Need compatibility confirmation? Send us your model, label photo, power rating, and connector requirements.

PRODUCT OVERVIEW

Built for reliable, continuous power delivery.

The G1482-1600WNA is built for infrastructure systems that require high 54.5V power capacity, compact CRPS integration, and stable continuous-duty operation. Its 1600W output makes it suitable for high-load PoE switches, telecom edge platforms, AI network nodes, multi-service gateways, and dense network infrastructure where power headroom, uptime, and remote visibility are critical. Commissioning should verify grounding, input protection, output stability, and the response of any redundant or hot-swap control logic. Qualification should include airflow direction, thermal margin, cable routing, and access for routine module replacement. Backplane pinout, control signaling, and mechanical retention should be checked together before the unit is approved for production use.

Before integrating the G1482-1600WNA, confirm the mating connector or backplane, input source, output-rail requirements, hot-swap sequence, airflow direction, monitoring interface, redundancy behavior, and service clearance against the target platform.

CORE ADVANTAGES

1600W CRPS Power Supply Optimized for PoE, Networking, Telecom, and AI Systems

1600W Power for Demanding PoE Infrastructure The G1482-1600WNA is designed for high-capacity PoE switches, telecom devices, advanced networking equipment, and AI-connected systems that require robust 1600W power delivery in a compact CRPS module.

01

1600W Power for Demanding PoE Infrastructure The G1482-1600WNA is designed for high-capacity PoE switches, telecom devices, advanced networking equipment, and AI-connected systems that require robust 1600W power delivery in a compact CRPS module.

02

Compact 1U CRPS Mechanical Design With a 185 × 73.5 × 40 mm form factor, this model supports dense rack installations, modular network chassis, telecom cabinets, and space-constrained infrastructure deployments.

03

Wide AC and DC Input Compatibility It supports 90–264Vac AC input and 180–300Vdc DC input, allowing flexible deployment across enterprise networks, telecom rooms, edge sites, data facilities, and global power environments.

04

54.5V Main Output for High-Load PoE Systems The unit provides a 54.5V main output at 29.35A together with a 12V standby output at 3A, supporting high-power PoE distribution, switching boards, control logic, and auxiliary management circuits.

05

Digital Control with PMBus Monitoring With full digital control and PMBus 1.2 support, the G1482-1600WNA enables compatible systems to monitor operating status, voltage behavior, current conditions, telemetry, and fault information.

06

Built for Reliable High-Density Deployment Platinum-level efficiency, active PFC, smart fan control, reverse airflow support, and global safety and EMC compliance options help this model support stable long-term operation in demanding PoE, telecom, and AI network environments.

MODEL SELECTION

Compare Gospower power options.

Review nearby Gospower models and select the power level, output architecture, efficiency grade, and form factor that best match the target system.

Model Power Output Current Efficiency Form Factor Recommended Use
G1482-0600WNA 600w 12V Platinum CRPS SD-WAN gateways and compact edge storage
G1482-0920WNA 920w 12V Platinum CRPS Multi-radio access systems and cache servers
G1482-1300WNA 1300w 12V Platinum CRPS POP compute nodes and cloud service clusters
G1482-1600WNA 1600w 12V Platinum CRPS Multi-tenant edge platforms and AI gateways
G1482-2000WNA 2000w 12V Platinum CRPS Data center edge racks and large POP deployments

DEPLOYMENT SCENARIOS

Where G1482-1600WNA fits best.

The G1482-1600WNA is built for infrastructure systems that require high 54.5V power capacity, compact CRPS integration, and stable continuous-duty operation. Its 1600W output makes it suitable for high-load PoE switches, telecom edge platforms, AI network nodes, multi-service gateways, and dense network infrastructure where power headroom, uptime, and remote visibility are critical.

Scenario System Requirement Why G1482-1600WNA Fits
High-Power PoE Switches Stable power for dense PoE ports, switch boards, fans, and control modules 54.5V output at 29.35A supports large PoE power budgets
Telecom Edge Platforms Continuous output for access hardware, interface cards, and service equipment Wide AC/DC input supports varied telecom and field power environments
AI Network Nodes Power support for intelligent routing, local inference, and traffic analysis 1600W output provides headroom for AI-assisted network workloads
Multi-Service Gateways Balanced power for routing, firewall, SD-WAN, storage, and application services Strong output supports mixed network functions in compact systems
Smart Campus Networks Reliable power for access points, cameras, controllers, and connected devices 54.5V architecture supports large-scale PoE device deployment
Dense Network Infrastructure Serviceable power for rack-mounted switching and communication platforms CRPS design and PMBus visibility support maintenance and monitoring

POWER DESIGN

Reliability notes for continuous operation.

The G1482-1600WNA is designed for high-demand PoE and network infrastructure where strong 54.5V output, digital power visibility, and compact mechanical integration are essential. Its 1600W rating gives system designers substantial operating margin for dense PoE loads, telecom platforms, AI-enabled network systems, and multi-service edge deployments.

  • 1600W output capacity supports high-power PoE switches, telecom edge platforms, AI network nodes, smart campus systems, and multi-service gateways.
  • 54.5V main output at 29.35A supports PoE-oriented power distribution for high-density switching, access, and connected-device infrastructure.
  • 12V standby output at 3A supports management boards, standby operation, control logic, and auxiliary system circuits.
  • Active PFC helps improve input power quality and supports efficient conversion across different AC operating conditions.
  • Wide AC/DC input compatibility allows deployment in enterprise networks, telecom rooms, data facilities, branch cabinets, and distributed infrastructure sites.
  • PMBus 1.2 communication provides visibility into voltage, current, operating status, telemetry, and fault information in supported systems.
  • Smart fan control adjusts cooling behavior according to load demand and thermal conditions.
  • Reverse airflow support allows integration into front-to-back or back-to-front chassis cooling layouts.

INSTALLATION

Installation and operating guidance.

Confirm electrical compatibility, thermal clearance, mechanical fit, redundancy requirements, and system load before integration.

Installation / Operation Item Guidance
Load Planning Review total PoE budget, switch board demand, AI module load, fan power, and standby consumption before deployment
Chassis Fitment Confirm the 185 × 73.5 × 40 mm CRPS size before mechanical integration
Input Connection Use within the supported 90–264Vac or 180–300Vdc input range
PoE Voltage Check Confirm that the target platform is designed for a 54.5V main power input
Standby Power Check Verify that the system standby requirement matches the 3A 12V standby output
High-Load PoE Margin Leave practical headroom for device startup, port expansion, peak PoE draw, and fan speed changes
Airflow Direction Match standard or reverse airflow with the chassis cooling path
Monitoring Setup Use PMBus 1.2 where supported for telemetry, fault alerts, and maintenance visibility

FAQ

Frequently asked questions about G1482-1600WNA.

Key answers for specification matching, installation planning, and system integration.

What type of power supply is the G1482-1600WNA?

The G1482-1600WNA is a 1600W CRPS power supply designed for PoE networking, telecom infrastructure, AI-connected systems, and high-density network equipment.

What is the size of this model?

This model uses a compact 1U CRPS form factor with a size of 185 × 73.5 × 40 mm, making it suitable for dense network chassis and rack-mounted communication systems.

What input voltage range does it support?

The G1482-1600WNA supports 90–264Vac AC input and 180–300Vdc DC input for flexible deployment across different infrastructure power environments.

Does the G1482-1600WNA support PMBus monitoring?

Yes. The unit supports PMBus 1.2, allowing compatible systems to monitor operating status, telemetry, voltage behavior, current conditions, and fault information.

Why is this model suitable for high-capacity PoE systems?

Its 54.5V main output at 29.35A provides strong power capacity for dense PoE switch platforms, connected-device networks, and high-load access infrastructure.

How does the 1600W rating help telecom and edge deployments?

The 1600W rating provides additional headroom for telecom access hardware, edge gateways, control boards, interface modules, cooling systems, and continuous mixed-service operation.

What makes this model different from lower-power G1482 versions?

Compared with 600W, 920W, and 1300W models, the G1482-1600WNA offers a larger 54.5V output budget, making it better suited for heavier PoE loads and more demanding network infrastructure.

What should be checked before integrating this PSU?

Confirm the 54.5V input requirement, total PoE power budget, connector compatibility, standby power demand, airflow direction, thermal clearance, and PMBus support before deployment.

KEEP EXPLORING

Related products

View category →